Journal of the Korean Geotechnical Society (한국지반공학회논문집)

Korean Geotechnical Society (한국지반공학회)
권호 표지
DOI QR코드

DOI QR Code

Measurement of Retaining Tensile Load with the Relative Displacement Detector of Ground Anchors

상대변위측정기를 이용한 지반앵커의 보유인장력 측정

  • 정현식 (경기대학교 토목공학과) ;
  • 한광석 (경기대학교 토목공학과) ;
  • 이영생 (경기대학교 토목공학과)
  • Received : 2017.09.06
  • Accepted : 2017.10.10
  • Published : 2017.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

The tension load of the ground anchor inserted in the ground gradually changes over time. In this regard the change of the initial tension load is primarily decreased by the fixation condition of the fixing head and the mechanical characteristics of the tensile material. The subsequent additional tension load is a time-dependent loss mostly due to the fixing conditions of the bonded length and the surrounding ground properties of the field. In this paper, therefore, a measurement system using a relative displacement detector that can relatively easily measure the change of tension load is discussed. As a result of the review, it was confirmed that the results using the relative displacement detector are similar to those of the real scale model test, and it was also confirmed that similar results were obtained with the result of the pull-out test conducted on the ground anchors fixed to weathered rocks condition. In addition, a pull-out test was conducted on the test anchors whose initial tension load loss was relatively large and through this test pull-out behavior of the tension type ground anchors was verified.

지반내 근입된 앵커의 인장력은 시간이 경과하면서 점차 변화하게 되는데 이때 초기 인장력의 변화는 보통 정착헤드의 정착조건과 인장자재의 기계적 특성에 의해 1차적으로 감소하게 되며, 이후 추가적인 인장력의 변화는 대부분 정착장의 정착조건과 주변 지반특성에 기인한 시간의존적인 정착거동에 좌우된다. 따라서 본 논문에서는 이러한 인장력 변화를 비교적 쉽게 측정 및 분석할 수 있는 상대변위측정기를 이용한 측정시스템에 대해서 연구하였다. 검토결과 실규모 모형시험을 통해서 본 측정시스템의 적용성을 확인 하였으며, 또한 풍화암에 정착된 지반앵커를 대상으로 실시한 현장 시험결과와도 유사함을 확인함에 따라 본 측정시스템의 적용성을 확인하였다. 그리고 초기인장력이 비교적 크게 감소된 시험앵커를 대상으로 추가적인 인발시험을 실시하였으며 이를 통해 인장형 앵커의 인발거동을 확인하였다.

Keywords

References

  1. Manual for Design, construction and maintenance of ground anchors, Ministry of Land, Transport and Maritime Affairs of Korea, 2009, p.86-101.
  2. British standard BS 1237 (2000), "Execution of Special Geotechnical Work - Ground Anchors", pp.30-35.
  3. Coates, D. F. and Yu, Y. S. (1970), "Three Dimensional Stress Distributions Around a Cylindrical Hole and Anchor", Proc. 2nd Int. Conf. on Rock Mech., Belgrade, pp.175-182.
  4. Federal Highway Administration (1999), "Ground Anchors and Anchored Systems", pp.4-10, 46-77.
  5. GEOSPEC-1 (1989), "Model Specification for Prestressed Ground Anchors", Geotechnical control office, Civil Engineering Services Department Hong Kong, pp.46-65.
  6. Hong, S. W. (2002), "The Study on Pullout Resistance Characteristic of the Compresssion Anchor by Pullout Test on the Field", Journal of Advanced Research in Ocean Engineering, Vol.16, No.2, pp. 44-52.
  7. Hong, W. P., Yun, J. M., and Song, Y. S. (2004), "Lateral Earth Pressure acting on Anchored Retention Walls installed in Cut Slope", Journal of the Korean Society of Civil Engineers, Vol.24, No.2C, pp.125-133.
  8. Jeong, H. S., Han, K. S., and Lee, Y. S. (2017), "Numerical Study on the Skin Friction Characteristics of Tension Type Ground Anchors in Weathered Soil", Journal of the Korean Geotechnical Society, Vol.33, No.1, pp.39-56. https://doi.org/10.7843/KGS.2017.33.1.39
  9. Kim, J. H. and Jeong, H. S. (2014), "Characteristics of Multi Load Transfer Ground Anchor System", Journal of Korean Tunnelling and Underground Space Association, Vol.16, No.01, pp.25-50. https://doi.org/10.9711/KTAJ.2014.16.1.025
  10. Kim, J. H. and Jeong, H. S. (2016), "Ground Anchor Technique for Executives", first edition, CIR, pp.17-53, 137-148.
  11. Kim, N. K. (2001), "Load Transfer of Tension and Compression Anchors in Weathered Soil", Journal of the Korean Geotechnical Society, Vol.17, No.3, pp.59-68.
  12. Kim, Y. M., Cho, K. W., Kim, W. K., and Kim, H. M. (2004), "Load Distribution and Pullout Capacity of Compression Anchors", Journal of the Korean Society of Civil Engineers, pp.4219-4224.
  13. Littlejohn, G. S. (1980), "Design Estimation of Ultimate Load Holding Capacity of Ground Anchors", Ground Engineering, England, pp.25-39.
  14. Mecsi, J. (1997), "Some Practical and Theoretical Aspects of Grouted Soil Anchors", Institution of Civil Engineers Conference on Ground Anchors and Anchored Structures, London, March 1997, pp.119-130.
  15. Ostermayer, H. (1974), "Construction, Carrying Behavior and Creep Characteristics of Ground Anchors", ICE Conf. on Diaphargm Walls and Anchorages, London, pp.141-151.
  16. Ostermayer, H. and Scheele, H. (1977), "Research on Ground Anchors in Non-Cohesive Soils", Revue Francaise de Geotechnique, Vol.3, pp.92-97.
  17. Post-Tensioning Institute (2004), "Recommendations for Prestressed Rock and Soil Anchors", pp.35-50.
  18. Soiltech Korea. Co., Ltd. (2015), "Technical Manual for Self Diagnosable Ground Anchor System", pp.1-6.
  19. Sung, H. J. (2012), "Tension Force Monitoring of Ground Anchor Using Fiber Optic Sensors Embedded Tendon", Ph D Thesis, Chonnam National University, pp.69-144.
  20. Sung, H. J., Kim, Y. S., Kim, J. M., and Park, G. H. (2011), "Tension Force Monitoring of Tension Type Ground Anchor Using Optical FBG Sensors", Journal of the Korean Geotechnical Society, Vol.27, No.6, pp.17-26. https://doi.org/10.7843/kgs.2011.27.6.017
  21. Vukotic, G. and Gonzalez Galindo, J. (2013), "The Influence of Bond Stress Distribution on Ground Anchor Fixed Length Design. Field Results and Proposal for Design Methodology", Proceddings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, pp.2119-2122.
  22. Xanthakos, P. P. (1991), "Ground Anchors and Anchored Structures", A Wiley-Interscience Publication, pp.123-195.