Structural Engineering and Mechanics

  • 제64권2호
  • /
  • Pages.225-232
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study on design parameters of leaning-type arch bridges

  • Li, Ying (Department of Bridge Engineering, Tongji University) ;
  • Xiao, Ru-Cheng (Department of Bridge Engineering, Tongji University) ;
  • Sun, Bin (Department of Bridge Engineering, Tongji University)
  • 투고 : 2016.11.06
  • 심사 : 2017.08.04
  • 발행 : 2017.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Leaning-type arch bridge is a new spatial structural system composed of two vertical arches and two leaning arches. So far there has been no contrast analysis of leaning type arch bridge with different systems. This paper focus on a parametric study of leaning type arch bridge with different systems to find the influential rules on structural forces and stability and to provide some reference for practical designs. The parametric analysis is conducted with different rise-to-span ratios and bending rigidities of arch ribs by comparing internal forces. The internal forces decline obviously with the increase of the rise-to-span ratio. The bending moments at the centers of the main arches and the leaning arches are sensitive to the bending rigidities of arch ribs. Parametric studies are also carried out with different structural systems and leaning angles of the leaning arch by comparing the static stability. The lateral stiffness of leaning-type arch bridge is less than the in-plan stiffness. Compared with the leaning-type arch bridge without thrust, the leaning-type arch bridge with thrust has a lower stability safety coefficient. The stability safety coefficient rises gradually with the increase of inclining angle of the leaning arch. This study shows that the rise-to-span ratio, bending rigidities of arch ribs, structural system and leaning angles of the leaning arch are all critical design parameters. Therefore, these parameters in unreasonable range should be avoided.

키워드

참고문헌

  1. Cerver, F.A. (1996), New Bridges (Arco Colour Thematic Architecture), Watson-Guptill Pubns, Spain.
  2. Chen, H. and Sun, Y.T. (2009), "Variation sloping angle of arch rib influenced on the stability of double X-shaped arch bridge", J. Railw. Sci. Eng., 6(1), 21-24. (in Chinese)
  3. Chen, H., Sun, Y.T. and Hu, F. (2007), "Effect of arch rib construction errors on mechanical properties of double X-shape arch bridge", Bridge Construct., 1, 36-38. (in Chinese)
  4. Gou, H.Y, Qian, H. and Wang, J. (2013), "Spatial mechanical behaviors of long-span V-shape rigid frame composite arch bridges", Struct. Eng. Mech., 47(1), 59-73. https://doi.org/10.12989/sem.2013.47.1.059
  5. Gui, C.Z., Lei, J.Q., Yoda, T., Lin, W.W. and Zhang, Y.S. (2016), "Effects of inclination angle on buckling of continuous composite bridges with inclined parabolic arch ribs", Int. J. Steel Struct., 16(2), 361-372. https://doi.org/10.1007/s13296-016-6009-x
  6. Jorquera-Lucerga, J.J. (2013), "Understanding Calatrava's bridges: A conceptual approach to the 'La Devesa-type' footbridges", Eng. Struct., 56, 2083-2097. https://doi.org/10.1016/j.engstruct.2013.08.026
  7. Li, Y. (2006), "Study on design theories of combinatorial bridges with beam and leaning arch", Master's Dissertation, Tongji University, Shanghai, China.
  8. Liu, A.R., Huang, Y.H., Fu, J. Y., Yu, Q.C. and Rao, R. (2015), "Experimental research on stable ultimate bearing capacity of leaning-type arch rib systems", J. Constr. Steel Res., 114, 281-292. https://doi.org/10.1016/j.jcsr.2015.08.011
  9. Liu, A.R., Huang, Y.H., Yu, Q.C. and Rao, R. (2014), "An analytical solution for lateral buckling critical load calculation of leaning-type arch bridge", Math. Probl. Eng., 2014, Article ID 578473, 14.
  10. Lu, P.Z., Zhang, J. and Zhao, R.D. (2009), "Study on the mechanical performance of butterfly arch bridge", Struct. Des. Tall Spec. Build., 18(5), 469-483. https://doi.org/10.1002/tal.449
  11. Manterola, J., Gil, M.A. and Munoz-Rojas, J. (2011), "Spatial arch bridges over the Galindo and Bidasoa Rivers", Struct. Eng. Int., 21(1), 114-121. https://doi.org/10.2749/101686611X12910257102794
  12. Marta, S.C., Ana, M.R. and Aparicio, A.C. (2012), "Structural behavior of inferior-deck spatial arch bridges with imposed curvature", J. Bridge Eng., 17(4), 682-690. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000282
  13. Xiao, R.C., Sun, H.T., Jia, L.J., Sun, B., Chen, L. and Fan X.L. (2004), "Leaning-type arch bridges", Shanghai Highw., 4, 22-26. (in Chinese)