DOI QR코드

DOI QR Code

Experimental and FE simulations of ferrocement columns incorporating composite materials

  • Shaheen, Yousry B.I. (Civil Engineering Department, Faculty of Engineering, Menoufia University) ;
  • Mahmoud, Ashraf M. (Civil Engineering Department, Faculty of Engineering, Modern University for Technology and Information (MTI)) ;
  • Refat, Hala M. (Civil Engineering Department, Faculty of Engineering, Benha University)
  • Received : 2017.01.19
  • Accepted : 2017.06.05
  • Published : 2017.10.25

Abstract

This paper presents a proposed method for producing reinforced composite concrete columns reinforced with various types of metallic and non metallic mesh reinforcement. The experimental program includes casting and testing of twelve square columns having the dimensions of $100mm{\times}100mm{\times}1000mm$ under concentric compression loadings. The test samples comprise all designation specimens to make comparative study between conventionally reinforced concrete column and concrete columns reinforced with welded steel mesh, expanded steel mesh, fiber glass mesh and tensar mesh. The main variables are the type of innovative reinforcing materials, metallic or non metallic, the number of layers and volume fraction of reinforcement. The main objective is to evaluate the effectiveness of employing the new innovative materials in reinforcing the composite concrete columns. The results of an experimental investigation to examine the effectiveness of these produced columns are reported and discussed including strength, deformation, cracking, and ductility properties. Non-linear finite element analysis; (NLFEA) was carried out to simulate the behavior of the reinforced concrete composite columns. The numerical model could agree the behavior level of the test results. ANSYS-10.0 Software. Also, parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of column dimensions. The results proved that new reinforced concrete columns can be developed with high strength, crack resistance, and high ductility properties using the innovative composite materials.

Keywords

References

  1. Abdel-Naby, A. (2006), "Development of ferrocement U-shaped beams infilled with core materials", M.S. Thesis submitted to the American University in Cairo, Egypt.
  2. Abdel-Tawab, A. (2006), "Development of permanent formwork for beams using ferrocement laminates", Ph.D. Thesis, submitted to Menoufia University, Egypt.
  3. Ahmed, T., Ali, S.K.S. and Choudhury, J.R. (1994), "Experimental study of ferrocement as a retrofit material for masonry columns", Proceedings of the Fifth International Symposium on Ferrcement, Eds. Nedwell and Swamy, E& FN Spon, London.
  4. ANSYS (2005), "Engineering analysis system user's manual", vol. 1&2, and theoretical manual. Revision 8.0, Swanson analysis system inc., Houston, Pennsylvania.
  5. ASTM C III6/C III6M Standard Specification for Fiber-Reinforced Concrete (2015), ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA.
  6. El-kholy, A.M. and Dahish, H.A. (2015), "Improved confinement of reinforced concrete columns", Ain Shams Eng. J., 7(2), 1-12.
  7. Fahmy, E.H., Abou-Zeid, M.N., Shaheen, Y.B. and Gaafar, H. (2005), "Behavior of ferrocement panels under axial and flexural loadings", Proceedings of the 33rd Annual General Conference of the Canadian Society of Civil Engineering, GC-150-1 - GC-150-10.
  8. Fahmy, E.H., Shaheen, Y.B. and Abou-Zeid, M.N. (2004), "Development of ferrocement panels for floor and wall construction", 5th Structural Specialty Conference of the Canadian Society for Civil Engineering, ST218-1-ST218-10.
  9. Fahmy, E.H., Shaheen, Y.B. and Korany, Y. (1999), "Environmentally friendly high strength concrete", Proceedings of the 24th Conference on Our World in Concrete and Structures, 171-178.
  10. Fahmy, E.H., Shaheen, Y.B. and Korany, Y. (1999), "Repairing reinforced concrete columns using ferrocement laminates", J. Ferrocem., 29(2), 115-124.
  11. Fahmy, E.H., Shaheen, Y.B., Abou-Zeid, M.N. and Gaafar, H. (2004), "Ferro-cement sandwich and cored panels for floor and wall construction", Proceedings of the 29th Conference on Our World in Concrete and Structures, 245-252.
  12. Fahmy, E.H., Shaheen, Y.B., Ezzat, H., Abdelnaby, A.M. and Abou-Zeid, M.N. (2013), "Applying the ferrocement concept in construction of concrete beams incorporating reinforced mortar permanent forms", Int. J. Concrete Struct. Mater., 8(1), 83-97. https://doi.org/10.1007/s40069-013-0062-z
  13. Hazem, R. (2009), "Non-metallic Reinforcement for the U-shaped ferrocement forms instead of the conventional steel mesh", Deutsches Zentrum fur Entwicklungstechnologien.
  14. Hoque, M. (2006), "3D nonlinear mixed finite-element analysis of RC beams and plates with and without FRP reinforcement", M.Sc. Thesis, University of Manitoba, Winnipeg, Manitoba, Canada.
  15. Housing and Building national research Center (2007), "The Egyptian Code for Design and Construction of Concrete Structures", ECP 203-2007, Ministry of Housing, Utilities and Urban Communities, Giza, Egypt.
  16. IFS Commitee 10 (2001), "Ferrocement model code: building code recommendations for ferrocement", IFS 10-01, International Ferrocement Society, Asian Institute of Technology, Bangkok, Thailand.
  17. Kaish, A.B.M.A., Jamil, M., Raman, S.N., Zain, M.F.M. and Alam, M.R. (2016), "An approach to improve conventional square ferrocement jacket for strengthening application of short square RC column", Mater. Struct., 49, 1025-1037. https://doi.org/10.1617/s11527-015-0556-z
  18. Kaushik, S.K., Prakash, A. and Singh, K.K. (1994), "Inelastic buckling of ferrocement encased columns", Proceedings of the Fifth International Symposium on Ferrcement, Eds. Nedwell and Swamy, E& FN Spon, London.
  19. Kumar, V. and Patel, P.V. (2016), "Strengthening of axially loaded concrete columns using stainless steel wire mesh (SSWM)-numerical investigations", Struct. Eng. Mech., 60(6), 979-999. https://doi.org/10.12989/sem.2016.60.6.979
  20. Kwon, M., Seo, H. and Kim, J. (2016), "Seismic performance of RC-column wrapped with Velcro", Struct. Eng. Mech., 58(2), 379-395. https://doi.org/10.12989/sem.2016.58.2.379
  21. Mansur, M.N. and Paramasivam, P. (1990), "Ferro-cement short columns under axial and eccentric compression", ACI Struct. J., 84(5), 523-529.
  22. Nedwell, P.J., Ramesht, M.H. and Rafei-Taghanaki, S. (1994), "Investigation into the repair of short square columns using ferrocement", Proceedings of the Fifth International Symposium on Ferrcement, Eds. Nedwell and Swamy, E& FN Spon, London.
  23. Onathara, M. and Martin, I.M. (2015), "Comparative study of columns strengthened by steel angles and ferrocement jacketing", International Conference on Technological Advancements in Structures and Construction, TASC- 15, 10-13.
  24. Shaheen, Y.B.I., Eltaly, B. and Kameel, M. (2013), "Experimental and analytical investigation of ferrocement water pipe", J. Civil Eng. Constr. Tech., 4(4), 157-167.
  25. Shaheen, Y.B.I., Mahmoud, A.M. and Refat, H.M. (2016), "Structural performance of ribbed ferrocement plates reinforced with composite materials", Struct. Eng. Mech., 60(4), 567-594. https://doi.org/10.12989/sem.2016.60.4.567
  26. Singh, G. (2006), "Finite element analysis of reinforced concrete shear walls", M.Sc. Thesis, Deemed University, India.
  27. Singh, V., Bansal, P.P. and Kumar, M. (2015), "Experimental studies on strength and ductility of ferrocement jacketed RC beam-column joints", Int. J. Civil Struct. Eng., 5(3), 199-205.
  28. Sirimontree, S., Witchayangkoon, B. and Lertpocasombut, K. (2015), "Strengthening of reinforced concrete column via ferrocement jacketing", Am. Tran. Eng. Appl. Sci., 4(1), 39-47.