DOI QR코드

DOI QR Code

Depth-dependent evaluation of residual material properties of fire-damaged concrete

  • Kim, Gyu-Jin (Department of Civil and Environmental Engineering, Korean Advanced Institute of Science and Technology) ;
  • Kwak, Hyo-Gyoung (Department of Civil and Environmental Engineering, Korean Advanced Institute of Science and Technology)
  • 투고 : 2016.11.16
  • 심사 : 2017.07.28
  • 발행 : 2017.10.25

초록

In this study, fire-damaged concrete was investigated by a nonlinear resonance vibration (NRV) technique, in order to evaluate its residual material properties. For the experiments, five cubic concrete specimens were prepared and four of them were damaged at different temperatures using a furnace. With a thermal insulator wrapped at the sides of specimen, thermal gradation was applied to the samples. According to the peak temperatures and depths of the samples, nonlinearity parameters were calculated with the NRV technique before the tendency of the parameters was evaluated. In addition, compressive strength and dynamic elastic modulus were measured for each sample and a comparison with the nonlinearity parameter was carried out. Through the experimental results, the possibility of the NRV technique as a method for evaluating residual material properties was evaluated.

키워드

과제정보

연구 과제 주관 기관 : Korea Agency for Infrastructure Technology Advancement(KAIA), Ministry of Land, Infrastructure and Transport

참고문헌

  1. ACI(American Concrete Institute) (1989), ACI 216R-89: Guide for Determining the Fire Endurance of Concrete Elements, Farmington Hills, Michigan, U.S.A.
  2. ACI (1997), ACI Committee 216: Standard Method for Determining Fire Resistance of Concrete and Masonry Construction Assemlies, Farmington Hills, Michigan, U.S.A.
  3. ACI (1998), ACI Committee 228: Nondestructive Test Methods for Evaluation of Concrete in Structures, Farmington Hills, Michigan, U.S.A.
  4. ACI (2008), ACI Committee 318: Building Code Requirements for Structural Concrete and Commentary, Farmington Hills, Michigan, U.S.A.
  5. Alonso, C. and Fernandez, L. (2004), "Dehydration and rehydration processes of cement paste exposed to high temperature environments", J. Mater. Sci., 39(9), 3015-3024. https://doi.org/10.1023/B:JMSC.0000025827.65956.18
  6. ASTM C 39-01 (2001), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  7. ASTM C 496 (2004), Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, Annual Book of ASTM Standards, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  8. ASTM E 1876 (2009), Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  9. Bazant, J.P. and Kaplan, M.F. (1996), Concrete at Higher Temperatures: Material Properties and Mathematical Models, Longman, London, U.K.
  10. Choi, E.G., Kim, H.S. and Shin, Y.S. (2012), "Performance of fire damaged steel reinforced high strength concrete (SRHSC) columns", Steel Compos. Struct., 13(6), 521-537. https://doi.org/10.12989/scs.2012.13.6.521
  11. Cloni, P., Croce, P. and Salvatore, W. (2001), "Assessing fire damage to RC elements", Fire Saf. J., 42(6), 461-472. https://doi.org/10.1016/j.firesaf.2006.09.002
  12. Gomez, C.Q., Garcia, F.P., Arcos, A., Cheng, L., Kogia, M. and Papelias, M. (2017), "Calculus of the defect severity with EMATs by analyzing the attenuation curves of the guided waves", Smart Struct. Syst., 19(2), 195-202. https://doi.org/10.12989/sss.2017.19.2.195
  13. Guyer, R.A. and Johnson, P.A. (1999), "Nonlinear mesoscopic elasticity: Evidence for a new class of materials", Phys. Tod., 52(4), 30-36. https://doi.org/10.1063/1.882648
  14. Handoo, S., Agarwal, S. and Agarwal, S. (2002), "Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures", Cement Concrete Res., 32(7), 1009-1018. https://doi.org/10.1016/S0008-8846(01)00736-0
  15. Jhang, K.Y. (2009), "Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: A review", J. Prec. Eng. Manuf., 10(1), 123-135.
  16. Kim, J.H. and Kwak, H.G. (2008), "Nondestructive evaluation of elastic properties of concrete using simulation of surface waves", Comput. Aid. Civil Inf., 23(8), 611-624. https://doi.org/10.1111/j.1467-8667.2008.00562.x
  17. McCall, K. and Guyer, R. (1994), "Equation of state and wave propagation in hysteretic nonlinear elastic materials", J. Geophys. Res., 65(11), 651-659.
  18. Park, S.J., Kim, G.J. and Kwak, H.G. (2017), "Characterization of stress-dependent ultrasonic nonlinearity variation in concrete under cyclic loading using nonlinear resonant ultrasonic method", Constr. Build. Mater., 145, 272-282. https://doi.org/10.1016/j.conbuildmat.2017.03.201
  19. Park, S.J., Park, G.K., Yim, H.J. and Kwak, H.G. (2015), "Evaluation of residual tensile strength of fire-damaged concrete using a non-linear resonance vibration method", Mag. Concrete Res., 67(5), 235-246. https://doi.org/10.1680/macr.14.00259
  20. Payan, C., Garnier, V., Moysan, J. and Johnson, P. (2007), "Applying nonlinear resonant ultrasound spectroscopy to improving thermal damage assessment in concrete", J. Acoust. Soc. Am., 121(4), EL125-EL130. https://doi.org/10.1121/1.2710745
  21. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., 23(5), 611-621. https://doi.org/10.12989/scs.2017.23.5.611
  22. Van Den Abeele, K.E.A., Carmeliet, J., Ten Cate, J.A. and Johnson, P.A. (2000b), "Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, part II: Single-mode nonlinear resonance acoustic spectroscopy", Res. Nondestr. Eval., 12(1), 31-42. https://doi.org/10.1080/09349840009409647
  23. Van Den Abeele, K.E.A., Johnson, P.A. and Sutin, A. (2000a), "Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, part I: Nonlinear wave modulation spectroscopy (NWMS)", Res. Nondestr. Eval., 12(1), 17-30. https://doi.org/10.1080/09349840009409646
  24. Van Den Abeele, K.E.A., Sutin, A., Carmeliet, J. and Johnson, P.A. (2001), "Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS)", NDT&E Int., 34(4), 239-248. https://doi.org/10.1016/S0963-8695(00)00064-5
  25. Yang,H., Lin, Y., Hsiao, C. and Liu, J.Y. (2009), "Evaluating residual compressive strength of concrete at elevated temperatures using ultrasonic pulse velocity", Fire Saf. J., 44(1), 121-130. https://doi.org/10.1016/j.firesaf.2008.05.003
  26. Yu, K. and Lu, Z. (2015), "Influence of softening curves on the residual fracture toughness of post-fire normal-strength concrete", Comput. Concrete, 15(2), 199-213. https://doi.org/10.12989/cac.2015.15.2.199
  27. Zhang, G., Kodur, V., Hou, W. and He, S. (2017), "Evaluating fire resistance of prestressed concrete bridge girders", Struct. Eng. Mech., 62(6), 663-674. https://doi.org/10.12989/SEM.2017.62.6.663