Computers and Concrete

  • 제20권4호
  • /
  • Pages.439-448
  • /
  • 2017
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Side-NSM composite technique for flexural strengthening of RC beams

  • Hosen, Md. Akter (Department of Civil Engineering, Faculty of Engineering, University of Malay) ;
  • Jumaat, Mohd Zamin (Department of Civil Engineering, Faculty of Engineering, University of Malay) ;
  • Saiful Islam, A.B.M. (Department of Construction Engineering, College of Engineering, University of Dammam) ;
  • Salam, Md. Abdus (Department of Civil Engineering, Dhaka University of Engineering & Technology (DUET)) ;
  • Kim, Hung Mo (Department of Civil Engineering, Faculty of Engineering, University of Malay)
  • 투고 : 2016.05.26
  • 심사 : 2017.05.18
  • 발행 : 2017.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Reinforced concrete (RC) infrastructures often require strengthening due to error in design, degradation of materials properties after prolong utilization and increases load carrying capacity persuaded by new use of the structures. For this purpose, a newly proposed Side Near Surface Mounted (SNSM) composite technique was used for flexural strengthening of RC beam specimens. Analytical and non-linear finite element modeling (FEM) using ABAQUS were performed to predict the flexural performance of RC specimens strengthened with S-NSM using steel bars as a strengthening reinforcement. RC beams with various SNSM reinforcement ratios were tested for flexural performance using four-point bending under monotonic loading condition. Results showed significantly increase the yield and ultimate strengths up to 140% and 144% respectively and improved failure modes. The flexural response, such as failure load, mode of failure, yield load, ultimate load, deflection, strain, cracks characteristic and ductility of the beams were compared with those predicted results. The strengthened RC beam specimens showed good agreement of predicted flexural behavior with the experimental outcomes.

키워드

참고문헌

  1. ACI (1992), Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI211. 2-91).
  2. Akbarzadeh, H. and Maghsoudi, A.A. (2010), "Experimental and analytical investigation of reinforced high strength concrete continuous beams strengthened with fiber reinforced polymer", Mater. Des., 31(3), 1130-1147. https://doi.org/10.1016/j.matdes.2009.09.041
  3. Al-Mahmoud, F., Castel, A., Francois, R. and Tourneur, C. (2009), "Strengthening of RC members with near-surface mounted CFRP rods", Compos. Struct., 91(2), 138-147. https://doi.org/10.1016/j.compstruct.2009.04.040
  4. Al-Mahmoud, F., Castel, A., Francois, R. and Tourneur, C. (2010), "RC beams strengthened with NSM CFRP rods and modeling of peeling-off failure", Compos. Struct., 92(8), 1920-1930. https://doi.org/10.1016/j.compstruct.2010.01.002
  5. Almusallam, T.H., Elsanadedy, H.M., Al-Salloum, Y.A. and Alsayed, S.H. (2013), "Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars", Constr. Build. Mater., 40, 145-161. https://doi.org/10.1016/j.conbuildmat.2012.09.107
  6. Arduini, M., Di Tommaso, A. and Nanni, A. (1997), "Brittle failure in FRP plate and sheet bonded beams", ACI Struct. J., 94(4), 363-370.
  7. Arduini, M. and Nanni, A. (1997), "Behavior of precracked RC beams strengthened with carbon FRP sheets", J. Compos. Constr., 1(2), 63-70. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(63)
  8. Ashour, A., El-Refaie, S. and Garrity, S. (2004), "Flexural strengthening of RC continuous beams using CFRP laminates", Cement Concrete Compos., 26(7), 765-775. https://doi.org/10.1016/j.cemconcomp.2003.07.002
  9. Badawi, M. and Soudki, K. (2009), "Flexural strengthening of RC beams with prestressed NSM CFRP rods-experimental and analytical investigation", Constr. Build. Mater., 23(10), 3292-3300. https://doi.org/10.1016/j.conbuildmat.2009.03.005
  10. Bilotta, A., Ceroni, F., Di Ludovico, M., Nigro, E., Pecce, M. and Manfredi, G. (2011), "Bond efficiency of EBR and NSM FRP systems for strengthening concrete members", J. Compos. Constr., 15(5), 757-772. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000204
  11. Bossio, A., Fabbrocino, F., Lignola, G.P., Prota, A. and Manfredi, G. (2015), "Simplified model for strengthening design of beam-column internal joints in reinforced concrete frames", Polym., 7(9), 1732-1754. https://doi.org/10.3390/polym7091479
  12. Committee, A. (2011a), Building Code Requirements for Structural Concrete (318-11) and Commentary-(318R-11), American Concrete Institute, Detroit, Michigan, U.S.A.
  13. Committee, A. (2011b), Building Code Requirements for Structural Concrete (318-11) and Commentary-(318R-11), American Concrete Institute, Detroit, Michigan, U.S.A.
  14. De Lorenzis, L., Nanni, A. and La Tegola, A. (2000), "Strengthening of reinforced concrete structures with near surface mounted FRP rods", Proceedings of the the International Conference on Composite Materials, Advancing with Composites.
  15. De Lorenzis, L., Rizzo, A. and La Tegola, A. (2002), "A modified pull-out test for bond of near-surface mounted FRP rods in concrete", Compos. Part B: Eng., 33(8), 589-603. https://doi.org/10.1016/S1359-8368(02)00052-5
  16. De Lorenzis, L. and Teng, J. (2007), "Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures", Compos. Part B: Eng., 38(2), 119-143. https://doi.org/10.1016/j.compositesb.2006.08.003
  17. Desayi, P. and Krishnan, S. (1964), "Equation for the stress-strain curve of concrete", Proceedings of the ACI Journal.
  18. El-Hacha, R. and Rizkalla, S.H. (2004), "Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures", ACI Struct. J., 101(5), 717-726.
  19. El-Mihilmy, M.T. and Tedesco, J.W. (2000), "Deflection of reinforced concrete beams strengthened with fiber-reinforced polymer (FRP) plates", ACI Struct. J., 97(5).
  20. EN, B (2004), 1-1. Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution, London, U.K.
  21. Galati, D. and De Lorenzis, L. (2009), "Effect of construction details on the bond performance of NSM FRP bars in concrete", Adv. Struct. Eng., 12(5), 683-700. https://doi.org/10.1260/136943309789867836
  22. GangaRao, H.V., Taly, N. and Vijay, P. (2006), Reinforced Concrete Design with FRP Composites, CRC Press.
  23. Hawileh, R.A., Rasheed, H.A., Abdalla, J.A. and Al-Tamimi, A.K. (2014), "Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems", Mater. Des., 53, 972-982. https://doi.org/10.1016/j.matdes.2013.07.087
  24. Hibbitt, K. (2007), ABAQUS Version 6. 7: Theory Manual, Users' Manual, Verification Manual and Example Problems Manual: Hibbitt, Karlson and Sorenson Inc.
  25. Hildebrand, M. (1994), "Non-linear analysis and optimization of adhesively bonded single lap joints between fibre-reinforced plastics and metals", J. Adhes. Adhes., 14(4), 261-267. https://doi.org/10.1016/0143-7496(94)90039-6
  26. Hosen, M., Jumaat, M.Z., Islam, A., Darain, K. and Rahman, M. (2016), "Flexural performance of reinforced concrete beams strengthened by a new side near-surface mounted technique using carbon fibre-reinforced polymer bars: Experimental and analytical investigation", Sci. Adv. Mater., 8(4), 726-740. https://doi.org/10.1166/sam.2016.2656
  27. Hosen, M.A., Jumaat, M.Z. and Islam, A.B.M.S. (2015), "Inclusion of CFRP-epoxy composite for end anchorage in NSM-epoxy strengthened beams", Adv. Mater. Sci. Eng., 5(10).
  28. Hu, H.T., Lin, F.M. and Jan, Y.Y. (2004), "Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics", Compos. Struct., 63(3), 271-281. https://doi.org/10.1016/S0263-8223(03)00174-0
  29. Hu, H.T. and Schnobrich, W.C. (1989), "Constitutive modeling of concrete by using nonassociated plasticity", J. Mater. Civil Eng., 1(4), 199-216. https://doi.org/10.1061/(ASCE)0899-1561(1989)1:4(199)
  30. Jumaat, M.Z. and Alam, M.A. (2008), "Behaviour of U and L shaped end anchored steel plate strengthened reinforced concrete beams", Eur. J. Sci. Res., 22(2), 184-196.
  31. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behavior of concrete under biaxial stresses", Proceedings of the ACI Journal.
  32. Lorenzis, L.D. and Nanni, A. (2001), "Characterization of FRP rods as near-surface mounted reinforcement", J. Compos. Constr., 5(2), 114-121. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(114)
  33. Martinelli, E., Napoli, A., Nunziata, B. and Realfonzo, R. (2014), "RC beams strengthened with mechanically fastened composites: Experimental results and numerical modeling", Polym., 6(3), 613-633. https://doi.org/10.3390/polym6030613
  34. Nilson, A.H. (1982), State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete, American Society of Civil Engineers: Task Committee on Finite Element Analysis of Reinforced Concrete Structures of the Structural Division Committee on Concrete and Masonry Structures, New York, U.S.A.
  35. Novidis, D., Pantazopoulou, S. and Tentolouris, E. (2007), "Experimental study of bond of NSM-FRP reinforcement", Constr. Build. Mater., 21(8), 1760-1770. https://doi.org/10.1016/j.conbuildmat.2006.05.054
  36. Oudah, F. and El-Hacha, R. (2012), "A new ductility model of reinforced concrete beams strengthened using fiber reinforced polymer reinforcement", Compos. Part B: Eng., 43(8), 3338-3347. https://doi.org/10.1016/j.compositesb.2012.01.071
  37. Park, J.G., Lee, K.M., Shin, H.M. and Park, Y.J. (2007), "Nonlinear analysis of RC beams strengthened by externally bonded plates", Comput. Concrete, 4(2), 119-134. https://doi.org/10.12989/cac.2007.4.2.119
  38. Park, S. and Aboutaha, R. (2005), "Finite element modeling methodologies for FRP strengthened RC members", Comput. Concrete, 2(5), 389-409. https://doi.org/10.12989/cac.2005.2.5.389
  39. Rahal, K.N. and Rumaih, H.A. (2011), "Tests on reinforced concrete beams strengthened in shear using near surface mounted CFRP and steel bars", Eng. Struct., 33(1), 53-62. https://doi.org/10.1016/j.engstruct.2010.09.017
  40. Rahimi, H. and Hutchinson, A. (2001), "Concrete beams strengthened with externally bonded FRP plates", J. Compos. Constr., 5(1), 44-56. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(44)
  41. Ramana, V., Kant, T., Morton, S., Dutta, P., Mukherjee, A. and Desai, Y. (2000), "Behavior of CFRPC strengthened reinforced concrete beams with varying degrees of strengthening", Compos. Part B: Eng., 31(6), 461-470. https://doi.org/10.1016/S1359-8368(00)00022-6
  42. Rosenboom, O. and Rizkalla, S. (2006), "Behavior of prestressed concrete strengthened with various CFRP systems subjected to fatigue loading", J. Compos. Constr., 10(6), 492-502. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:6(492)
  43. Sharaky, I., Torres, L., Baena, M. and Mias, C. (2013), "An experimental study of different factors affecting the bond of NSM FRP bars in concrete", Compos. Struct., 99, 350-365. https://doi.org/10.1016/j.compstruct.2012.12.014
  44. Sharaky, I., Torres, L., Baena, M. and Vilanova, I. (2013), "Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete", Constr. Build. Mater., 38, 890-902. https://doi.org/10.1016/j.conbuildmat.2012.09.015
  45. Sharaky, I., Torres, L., Comas, J. and Barris, C. (2014), "Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars", Compos. Struct., 109, 8-22. https://doi.org/10.1016/j.compstruct.2013.10.051
  46. Sharif, A., Al-Sulaimani, G., Basunbul, I., Baluch, M. and Ghaleb, B. (1994), "Strengthening of initially loaded reinforced concrete beams using FRP plates", ACI Struct. J., 91(2), 160-168.
  47. Soliman, S.M., El-Salakawy, E. and Benmokrane, B. (2010), "Bond performance of near-surface-mounted FRP bars", J. Compos. Constr., 15(1), 103-111. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000150
  48. Tang, W., Balendran, R., Nadeem, A. and Leung, H. (2006), "Flexural strengthening of reinforced lightweight polystyrene aggregate concrete beams with near-surface mounted GFRP bars", Build. Environ., 41(10), 1381-1393. https://doi.org/10.1016/j.buildenv.2005.05.029
  49. Toutanji, H., Zhao, L. and Zhang, Y. (2006), "Flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets bonded with an inorganic matrix", Eng. Struct., 28(4), 557-566. https://doi.org/10.1016/j.engstruct.2005.09.011
  50. Zhang, D., Wang, Q. and Dong, J. (2016), "Simulation study on CFRP strengthened reinforced concrete beam under four-point bending", Comput. Concrete, 17(3), 407-421. https://doi.org/10.12989/cac.2016.17.3.407
  51. Zhou, Y., Gou, M., Zhang, F., Zhang, S. and Wang, D. (2013), "Reinforced concrete beams strengthened with carbon fiber reinforced polymer by friction hybrid bond technique: Experimental investigation", Mater. Des., 50, 130-139. https://doi.org/10.1016/j.matdes.2013.02.089

피인용 문헌

  1. Numerical finite element study of strengthening of damaged reinforced concrete members with carbon and glass FRP wraps vol.28, pp.2, 2017, https://doi.org/10.12989/cac.2021.28.2.137