DOI QR코드

DOI QR Code

전기자동차용 IPT 컨버터의 풀브릿지-하프브릿지 제어를 통한 고효율 운전 방법

High Efficiency Operation of the IPT converter with Full and Half bridge Control for Electric Vehicles

  • 투고 : 2017.02.27
  • 심사 : 2017.04.25
  • 발행 : 2017.10.20

초록

This paper proposes a control methodology for a high efficiency operation of an inductive power transfer (IPT) converter by combining full bridge (FB) and half bridge (HB) controls. To apply the proposed control to the IPT converter, the characteristics of each control method are analyzed. By examining the output voltages of the IPT converter and a theoretical loss analysis, the control shifting points between FB and HB controls are evaluated in accordance with the coupling coefficients and the load. Based on the control shifting points, the FB-HB control algorithm is implemented. By applying FB-HB control, high efficiency operation at the light load condition can be achieved.

키워드

참고문헌

  1. W. Chwei-Sen, O. H. Stielau, and G. A. Covic, "Design considerations for a contactless electric vehicle battery charger," IEEE Trans. Ind. Electron. Vol. 52, No. 5, pp. 1308-1314, Oct. 2005. https://doi.org/10.1109/TIE.2005.855672
  2. Z. U. Zahid, Z. Cong, C. Rui, W. E. Faraci, L. Jih-Sheng, M. Senesky, et al., "Design and control of a single-stage large air-gapped transformer isolated battery charger for wide-range output voltage for EV applications," in Energy Conversion Congress and Exposition (ECCE), 2013 IEEE, pp. 5481-5487, 2013.
  3. M. A. Kim, H. P. Park, and J. H. Jung, "Design methodology of 500 W wireless power transfer converter for high power transfer efficiency," The Transactions of Korean Institute of Power Electronics, Vol. 21, No. 4, pp. 356-363, Aug. 2016. https://doi.org/10.6113/TKPE.2016.21.4.356
  4. G. A. Covic and J. T. Boys, "Inductive power transfer," Proc. IEEE, Vol. 101, No. 6, pp. 1276-1289, Jun. 2013. https://doi.org/10.1109/JPROC.2013.2244536
  5. X. Qu, H. Han, S. C. Wong, C. K. Tse, and W. Chen, "Hybrid IPT topologies with constant current or constant voltage output for battery charging applications," IEEE Trans. Power Electron., Vol. 30, No. 11, pp. 6329-6337, Nov. 2015. https://doi.org/10.1109/TPEL.2015.2396471
  6. D. G. Woo, "Optimal design and control strategy of inductive power transfer charging system for electric vehicles," Ph.D. dissertation, Dept. Electron., Elect. & Comput. Eng., Sungkyunkwan Univ., Suwon, Korea, 2016.
  7. M. K. Kim, D. M. Joo, D. G. Woo, and B. K. Lee, "Counterplan of output voltage variation in accordance with coupling coefficient increase for LCCL-S compensation network IPT system," Power Electronics Annual Conference, pp. 1-2, Nov. 2015.
  8. R. Mecke and C. Rathge, "High frequency resonant inverter for contactless energy transmission over large air gap," in Proc. IEEE 35th Annu. Power Electron. Spec. Conf., Vol. 3, pp. 1737-1743, Jun. 2004.
  9. J. M. Burdio, L. A. Barragan, F. Monterde, D. Navarro, and J. Acero, "Asymmetrical voltage-cancellation control for full-bridge series resonant inverters," IEEE Trans. Power Electron., Vol. 19, No. 2, pp. 461-469, Mar. 2004. https://doi.org/10.1109/TPEL.2003.823250
  10. Y. M. Jeong, S. H. Ryu, D. H. Kim, and B. K. Lee, "Hybrid operation algorithm of LLC DC-DC converters for efficiency improvement," Power Electronics Annual Conference, pp. 301-302, Jul. 2013.
  11. M. K. Kim, D. G. Woo, B. K. Lee, N. J. Kim, and J. S. Kim, "Loss analysis of power conversion equipment for efficiency improvement," The Transactions of Korean Institute of Power Electronics, Vol. 19, No. 1, pp. 80-90, Feb. 2014. https://doi.org/10.6113/TKPE.2014.19.1.80