설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제29권9호
  • /
  • Pages.447-454
  • /
  • 2017
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

냉각공기 유속 측정에 기반한 철도차량용 공기압축기 열교환기의 열전달 특성 분석

Heat Transfer Analysis of a Heat Exchanger for an Air-Compressor of a Railway Vehicle Based on Cooling Air Flow Measurement

  • 안준 (국민대학교 기계공학부) ;
  • 김무선 (한국철도기술연구원) ;
  • 장성일 (국민대학교 대학원 기계공학과)
  • Ahn, Joon (School of Mechanical Engineering, Kookmin University) ;
  • Kim, Moo Sun (Korea Railroad Research Institute) ;
  • Jang, Seongil (Department of Mechanical Engineering, Graduate School, Kookmin University)
  • 투고 : 2017.06.26
  • 심사 : 2017.07.17
  • 발행 : 2017.09.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, local velocity distribution of cooling air in a heat exchanger used in an air compressor for a railway car was measured and heat transfer characteristics of the heat exchanger were analyzed. First, heat transfer coefficient and fin performance of the cooling air side were predicted and was checked if the fin of the heat exchanger was effectively used. Distribution of air flow rate at high temperature side was predicted through pipe network analysis and heat resistance at high temperature and low temperature side were predicted and compared. Spatial distribution of temperature in the interior and surface of the square channel constituting high-temperature side was predicted and appropriateness of the size of the heat exchanger was examined. As a result of the analysis, the present size of the heat exchanger could be reduced and it could be effective to promote heat transfer inside the heat exchanger rather than outside to improve performance of the heat exchanger.

키워드

참고문헌

  1. Cho, J. G., Koo, J. S., and Jung, H. S., 2013, Study on weight reduction of urban transit carbody based on material changes and structural optimization, Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 9, pp. 1099-1107. https://doi.org/10.3795/KSME-A.2013.37.9.1099
  2. Kim, H. W., Kim, J. W., Jung, H. S., and Park, K. B., 2011, A Study on Evaluating System Performance for Light-Weight Rolling Stock, Trans. Korean Soc. Railway, Vol. 14, No. 6, pp. 489-494. https://doi.org/10.7782/JKSR.2011.14.6.489
  3. Kim, W. Y., Ryu, T. W., Kim, H. J., Lee, S. G., and Yoon, S. H., 2010, Performance analysis of electric scroll compressor for rolling stock HVAC system, Proc. SAREK Summer Conference, pp. 79-85.
  4. Song, M. S., Park, E. S., Hwang, S. W., Oh, S. J., and Ko, H. K., 2011, A study on reducing vibration of oil-free reciprocating air compressors, Proc. Korean Soc. Railway Conference, pp. 656-662.
  5. Moore, R. and Hunter, P. D., 2012, Clean compressed air systems will aid reliability, Int. Railway Journal.
  6. ALMIiG, 2014, ALMIiG WP2N8ST TAO Compressor User Manual, pp. 32-41.
  7. Jang, J. H., Ahn, J., and Myong, H. K., 2013, CFD based shape design of guide vane for fan filter unit, Trans. Korean Soc. Mech. Eng. B, Vol. 37, No. 7, pp. 709-716. https://doi.org/10.3795/KSME-B.2013.37.7.709
  8. Lee, S., Ahn, J., and Shin, S., 2009, Numerical optimization of temperature distribution in HRSG system using inlet guide vane, Trans. KSCFE, Vol. 14, No. 3, pp. 1-8.
  9. Guo, K., 2015, Optimisation of plate/plate-fin heat exchanger design, Ph. D. Thesis, University of Manchester, U.K.
  10. Bergman, T. L., Lavine, A. S., Incropera, F. P., and DeWitt, D. P., Fundamentals of heat and mass transfer 7th ed, Wiley.
  11. Yaici, W., Ghorab, M., and Entchev, E., 2016, 3D CFD study of the effect of inlet air flow maldistribution on plate-fin-tube heat exchanger design and thermal-hydraulic performance, Int. J. Heat Mass Transf., Vol. 101, pp. 527-541. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.063
  12. Jiao, A., Zhang, R., and Jeong, S., 2003, Experimental investigation of header configuration on flow maldistribution in plate-fin heat exchanger, Appl. Thermal Sci., Vol. 23, pp. 1235-1246. https://doi.org/10.1016/S1359-4311(03)00057-7
  13. Potter, M. C. and Wiggert, D. C., Mechanics of fluids 3rd ed, CL Engineering.
  14. Manglik, R. J. and Bergles, A. E., 1996, Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger, Exp. Thermal Fluid Sci., Vol. 10, No. 2, pp. 171-180. https://doi.org/10.1016/0894-1777(94)00096-Q
  15. Taslim, M. E. and Spring, S. D., 1994, Effects of turbulator profile and spacing on heat transfer and friction in a channel, J. Thermophysics Heat Transf., Vol. 8, No. 3, pp. 555-562. https://doi.org/10.2514/3.578