DOI QR코드

DOI QR Code

A New LED Current Balancing Scheme Using Double-Step-Down DC-DC Converter

이중강압 DC-DC 컨버터를 이용한 새로운 LED 전류 밸런싱 기법

  • Kim, Kisu (School of Energy Engineering, Kyungpook National University) ;
  • Do, Duc Tuan (School of Energy Engineering, Kyungpook National University) ;
  • Kim, Heung-Geun (School of Energy Engineering, Kyungpook National University) ;
  • Cha, Honnyong (School of Energy Engineering, Kyungpook National University)
  • Received : 2017.08.03
  • Accepted : 2017.09.22
  • Published : 2017.10.01

Abstract

This paper presents a new LED current balancing scheme using double-step-down dc-dc converter. With the proposed structure, the two channel LED currents are automatically balanced without using any dedicated control or auxiliary circuit. In addition, switching loss of the switching devices in the proposed LED driver is lower than that of the conventional buck LED driver. To verify the operation of the proposed LED driver, a hardware prototype is built and tested with different number of LED.

Keywords

References

  1. H. Shih-Chang, S. Ming-Hwa, H. Po-Yu, and C. Kuan-Cheng, "Auto tracking DC/DC converter for adaptive LED driving system," IEEE Wireless Power Transfer Converence (WPTC), pp. 1-4, May. 2017.
  2. D. R. Weisz and F. A. Himmelstoss, "LED converter with limited duty cycle," 2014 ELEKTRO, pp. 406-410, May. 2014.
  3. X. Chen, D. Huang, Q. Li, and F. C. Lee, "Multichannel LED driver with CLL resonant converter," IEEE J. Emerging Sel. Topics Power Electron., vol. 3, no. 3, pp. 589-598, Sep. 2015. https://doi.org/10.1109/JESTPE.2015.2417219
  4. H. J. Chiu and S. J. Cheng, "LED backlight driving system for large-scale LCD panels," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2751-2760, Oct. 2007. https://doi.org/10.1109/TIE.2007.899938
  5. Y.-K. Lo, K.-H. Wu, K.-J. Pai, and H.-J. Chiu, "Design and implementation of RGB LED drivers for LCD backlight modules," IEEE Trans. Ind. Electron., vol. 56, no. 12, pp. 4862-4871, Dec. 2009. https://doi.org/10.1109/TIE.2009.2026771
  6. K. Marn-Go, "Proportional-Integral (PI) Compensator Design of Duty-Cycle-Controlled Buck LED Driver," IEEE Trans. Power Electron., vol. 30, no. 7, pp. 3852-3859, Jul. 2015. https://doi.org/10.1109/TPEL.2014.2341253
  7. M. Tavazoei, "From traditional to fractional PI control: A key for generalization," IEEE Ind. Electron. Mag., vol. 6, no. 3, pp. 41-51, Sep. 2012. https://doi.org/10.1109/MIE.2012.2207818
  8. C.-Y. Park, J.-W. Song, J.-W Yoo, "The reduction method of strings current unbalancing in LED lighting drving system," Journal of KIIEE, vol. 27, no. 5, pp. 26-32, May. 2013.
  9. S.-H. Lee, S.-H. Cho, C.-W Roh, S.-S. Hong, S.-K. Han, "A new current-balancing multi-channel LED driver for a large screen LCD backlight unit," Journal of KIPE, vol. 15, no. 2, pp. 111-118, Apr. 2010.
  10. H. Yuequan, M. M. Jovanovic, "LED Driver With Self-Adaptive Drive Voltage," IEEE Trans. Power Electron., vol. 23, no. 6, pp. 3116-3125, Nov. 2008. https://doi.org/10.1109/TPEL.2008.2004558
  11. W. Jianfeng, Z. Junming, H. Xiucheng, and X. Lianghui, "A Family of Capacitive Current Balancing Methods for Multi-Output LED Drivers," Applied Power Electronics Conference and Exposition (APEC)., pp. 2040-2046, Mar. 2011.
  12. L. Xueshan, Y. Qi, Z. Qun, X. Jianping, and Z. Guohua, "Single-Stage Single-Switch Four-Output Resonant LED Driver With High Power Factor and Passive Current Balancing," IEEE Trans. Power Electron., vol. 32, no. 6, pp. 4566-4576, Jul. 2017. https://doi.org/10.1109/TPEL.2016.2594836
  13. K. I. Hwa and W. Z. Jiang, "Nonisolated Two-Channel LED Driver With Automatic Current Balance and Zero-Voltage Switching," IEEE Trans. Power Electron., vol. 31, no. 12, pp. 8359-8370, Dec. 2016. https://doi.org/10.1109/TPEL.2016.2515088
  14. Y. Yuanmao, K. W. Eric, L. Jiongkang, and W. Daohong, "Single-Switch Multichannel Current-Balancing LED Drive Circuits Based on Optimized SC Techniques," IEEE Ind. Electron., vol. 62, no. 8, pp. 4761-4768, Aug. 2015. https://doi.org/10.1109/TIE.2015.2408813
  15. Y. Jang, M. M. Jovanovic, and Y. Panov, "Multi-phase buck converters with extended duty cycle," in Proc. 21st Annu. IEEE Appl. Power Electron. Conf. Expo., pp. 38-44, Mar. 2006.
  16. B. S. Oraw, and R. Ayyanar, "Voltage Regulator Optimization Using Multiwinding Coupled Inductors and Extended Duty Ratio Mechanisms," IEEE Trans. Power Electron., vol. 24, no. 6, pp. 1494-1505, June. 2009. https://doi.org/10.1109/TPEL.2009.2013223
  17. Shenoy, P. S., M. Amaro, J. Morroni, and D. Freeman, "Comparison of a Buck Converter and a Series Capacitor Buck Converter for High-Frequency, High-Conversion- Ratio Voltage Regulators," IEEE Trans. Power Electron., vol. 31, no. 10, pp. 7006-7015, Oct. 2016. https://doi.org/10.1109/TPEL.2015.2508018