Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Modeling and Analysis of Active Mounting System for a Plate-Type Structure

플레이트 형태의 구조물에 대한 능동 마운팅 시스템의 모델링 및 해석

  • Received : 2017.03.23
  • Accepted : 2017.08.11
  • Published : 2017.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, studies to reduce vibration and noise of automobiles have been actively conducted. However, previous studies did not concentrate on the optimization of the mount system with passive or active mounts. This study analytically studies an active mounting system with three active structural paths between source and receiver and the feasibility has been verified. Active mounting system has a coupled structure of piezoelectric stack actuators and passive mounts. A dynamic model of the whole system is prepared and the control force and phase of the stack actuators in each path are determined to target full isolation of each path. Its performance on vibration attenuation is investigated and based on it, optimized combinations of passive and active paths for the best attenuation are presented.

최근 자동차의 진동과 소음을 줄이기 위한 연구가 활발하게 이루어지고 있으나 기존의 연구들은 수동형 또는 능동형 마운트를 포함한 마운팅 시스템의 최적화에 대해서는 주목하지 않았다. 본 연구는 진동 소음원과 리시버 사이에 세 개의 구조적 경로를 가진 능동 마운팅 시스템에 대한 분석적인 연구를 수행하며 실제 시스템에의 적용 가능성을 확인한다. 능동 마운팅 시스템은 피에조 스택 액추에이터와 수동형 마운트가 커플링된 구조를 가지고 있다. 전체 시스템에 대한 동적 모델이 유도되고 각 경로의 스택 액추에이터 입력 힘과 위상이 각 경로의 완전한 절연을 타겟으로 하여 결정된다. 진동 저감 성능이 확인되고 이는 가장 좋은 저감을 가져오는 수동형 및 능동형 경로의 최적화된 결합을 제시한다.

Keywords

References

  1. Loewy, R.G., 1984, "Helicopter Vibrations: A Technological Perspective," Journal of American Helicopter Society, vol. 29, pp. 4-30. https://doi.org/10.4050/JAHS.29.4
  2. Kawaguchi, H., Bandoh, H. and Niwa, Y., 1996, "The Test Result of AVR (Active Vibration Reduction) System," The American Helicopter Society 52nd Annual Forum, pp. 123-136.
  3. Sutton, T., Elliott, S., Brennan, M., Heron, K., and Jessop, D., 1997, "Active Isolation of Multiple Structural Waves on a Helicopter Gearbox Support Strut," Journal of Sound and Vibration, vol. 205, pp. 81-101. https://doi.org/10.1006/jsvi.1997.0972
  4. Millott, A., Welsh, W., Yoerkie, C., MacMartin, D., and Davis, D., 1998, "Flight Test of Active Gear-mesh Noise Control on the S-76 Aircraft," Proc. 54th Annual Forum of the American Helicopter Society, pp 241-249.
  5. Baz, A., 2001, "Active Control of Periodic Structures," ASME Journal of Vibration and Acoustics, vol. 123, pp. 472-479. https://doi.org/10.1115/1.1399052
  6. Asiri, S., Baz, A., and Pines, D., 2005, "Periodic Struts for Gearbox Support System," Journal of Vibration and Control, vol. 11, pp. 709-721.
  7. Asiri, S., Baz, A., and Pines, D., 2006, "Active Periodic Struts for a Gearbox Support System," Smart Material Structures, vol. 15, pp. 1707-1714. https://doi.org/10.1088/0964-1726/15/6/024
  8. Gembler, W., Schweitzer, H., Maier, R., and Pucher, M., 1998, "Helicopter Interior Noise Reduction by Active Gearbox Struts," Proceedings of the 54th Annual Forum of the American Helicopter Society, pp. 37-47.
  9. Maier, R., Hoffmann, F., and Tewes, S., 2002, "Active Vibration Isolation System for Helicopter Interior Noise Reduction," 8th AIAA/CEAS Aeroacoustics Conference.
  10. Hoffmann, F., Maier, R., Janker, P., and Hermle, F., 2006, "Helicopter Interior Noise Reduction by using Active Gearbox Struts," 12th AIAA/CEAS Aeroacoustics Conference.
  11. Sano, H., Yamashita, T., Nakamura, M. 2002. "Recent Application of Active Noise and Vibration Control to Automobiles," Proceedings of Active 2002, Southampton, UK, pp. 29-42.
  12. Nguyen, M., 2009 "A Novel Semi-active Magnetorheological Mount for Vibration Isolation," University of Toledo, Dissertation.
  13. Matsuoka, H., Mikasa, T., and Nemoto, H., 2004, "NV Countermeasure Technology for a Cylinder-On-Demand Engine - Development of Active Control Engine Mount," SAE Technical Paper 2004-01-0413.
  14. Togashi, C. and Ichiryu, K., 2003, "Study on Hydraulic Active Engine Mount," SAE Technical Paper 2003-01-1418.