DOI QR코드

DOI QR Code

Damping and vibration analysis of viscoelastic curved microbeam reinforced with FG-CNTs resting on viscoelastic medium using strain gradient theory and DQM

  • Allahkarami, Farshid (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University) ;
  • Nikkhah-Bahrami, Mansour (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University) ;
  • Saryazdi, Maryam Ghassabzadeh (Vehicle Technology Research Institute, Amirkabir University of Technology)
  • 투고 : 2017.03.24
  • 심사 : 2017.06.21
  • 발행 : 2017.10.10

초록

This paper presents an investigation into the magneto-thermo-mechanical vibration and damping of a viscoelastic functionally graded-carbon nanotubes (FG-CNTs)-reinforced curved microbeam based on Timoshenko beam and strain gradient theories. The structure is surrounded by a viscoelastic medium which is simulated with spring, damper and shear elements. The effective temperature-dependent material properties of the CNTs-reinforced composite beam are obtained using the extended rule of mixture. The structure is assumed to be subjected to a longitudinal magnetic field. The governing equations of motion are derived using Hamilton's principle and solved by employing differential quadrature method (DQM). The effect of various parameter like volume percent and distribution type of CNTs, temperature change, magnetic field, boundary conditions, material length scale parameter, central angle, viscoelastic medium and structural damping on the vibration and damping behaviors of the nanocomposite curved microbeam is examined. The results show that with increasing volume percent of CNTs and considering magnetic field, material length scale parameter and viscoelastic medium, the frequency of the system increases and critically damped situation occurs at higher values of damper constant. In addition, the structure with FGX distribution type of CNTs has the highest stiffness. It is also observed that increasing temperature, structural damping and central angle of curved microbeam decreases the frequency of the system.

키워드

참고문헌

  1. Abdollahi, D., Ahdiaghdam, S., Ivaz, K. and Shabani, R. (2016), "A theoretical study for the vibration of a cantilever microbeam as a free boundary problem", Appl. Math. Model., 40(3), 1836-1846. https://doi.org/10.1016/j.apm.2015.09.041
  2. Ahouel, M., Houari, M.S.A., Adda Bedia, E.A. and Tounsi, A. (2016), "Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept", Steel Compos. Struct., Int. J., 20(5), 963-981. https://doi.org/10.12989/scs.2016.20.5.963
  3. Ansari, R., Gholami, R. and Sahmani, S. (2011), "Free vibration analysis of size-dependent functionally graded microbeams based on the strain gradient Timoshenko beam theory", Compos. Struct., 94(1), 221-228. https://doi.org/10.1016/j.compstruct.2011.06.024
  4. Chen, X. and Meguid, S.A. (2015), "On the parameters which govern the symmetric snap-through buckling behavior of an initially curved microbeam", Int. J. Solids Struct., 66, 77-87. https://doi.org/10.1016/j.ijsolstr.2015.04.011
  5. Dehrouyeh-Semnani, A.M., Dehrouyeh, M., Torabi-Kafshgari, M. and Nikkhah-Bahrami, M. (2015), "An investigation into sizedependent vibration damping characteristics of functionally graded viscoelastically damped sandwich microbeams", Int. J. Eng. Sci., 96, 68-85. https://doi.org/10.1016/j.ijengsci.2015.07.008
  6. Ebrahimi, F. and Salari, E. (2015), "Thermal buckling and free vibration analysis of size dependent Timoshenko FG nanobeam in thermal environments", Compos. Struct., 128, 363-380. https://doi.org/10.1016/j.compstruct.2015.03.023
  7. Ghadiri, M. and Shafiei, N. (2016), "Vibration analysis of rotating functionally graded Timoshenko microbeam based on modified couple stress theory under different temperature distributions", Acta Astronaut., 121, 221-240. https://doi.org/10.1016/j.actaastro.2016.01.003
  8. Ghayesh, M.H., Farokhi, H. and Hussain, S.H. (2016), "Viscoelastically coupled size-dependent dynamics of microbeams", Int. J. Eng. Sci., 109, 243-255. https://doi.org/10.1016/j.ijengsci.2016.09.004
  9. Ghayesh, M.H., Farokhi, H. and Gholipour, A. (2017), "Vibration analysis of geometrically imperfect three-layered sheardeformable microbeams", Int. J. Mech. Sci., 122, 370-383. https://doi.org/10.1016/j.ijmecsci.2017.01.001
  10. Ilkhani, M.R. and Hosseini-Hashemi, S.H. (2016), "Size dependent vibro-buckling of rotating beam based on modified couple stress theory", Compos. Struct., 143, 75-83. https://doi.org/10.1016/j.compstruct.2016.02.013
  11. Jia, X.L., Ke, L.L., Feng, C.B., Yang, J. and Kitipornchai, S. (2015), "Size effect on the free vibration of geometrically nonlinear functionally graded micro-beam under electrical actuation and temperature change", Compos. Struct., 133, 1137-1148. https://doi.org/10.1016/j.compstruct.2015.08.044
  12. Kolahch, R. and Moniribidgoli, A.M. (2016), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech. - Engl Ed., 372, 265-274.
  13. Kolahchi, R., Rabani Bidgoli, M., Beygipoor, Gh. and Fakhar, M.H. (2015), "A nonlocal nonlinear analysis for buckling in embedded FG-SWCNT-reinforced microplates subjected to magnetic field", J. Mech. Sci. Tech., 29, 3669-3677 . https://doi.org/10.1007/s12206-015-0811-9
  14. Kolahchi, R., Hosseini, H. and Esmailpour, M. (2016a), "Differential cubature and quadrature-Bolotin methods for dynamic stability of embedded piezoelectric nanoplates based on visco-nonlocal-piezoelasticity theories", Compos. Struct., 157, 174-186. https://doi.org/10.1016/j.compstruct.2016.08.032
  15. Kolahchi, R., Safari, M. and Esmailpour, M. (2016b), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023
  16. Kolahchi, R., Zarei, M.Sh., Hajmohammad, M.H. and Naddaf Oskouei, A. (2017), "Visco-nonlocal-refined Zigzag theories for dynamic buckling of laminated nanoplates using differential cubature-Bolotin methods", Thin-Wall Struct., 113, 162-169. https://doi.org/10.1016/j.tws.2017.01.016
  17. Lam, D.C.C., Yang, F., Chong, A.C.M., Wang, J. and Tong, P. (2003), "Experiments and theory in strain gradient elasticity", J. Mech. Phys. Solids, 51(8), 1477-1508. https://doi.org/10.1016/S0022-5096(03)00053-X
  18. Liu, Y.P. and Reddy, J.N. (2011), "A nonlocal curved beam model based on a modified couple stress theory", Int. J. Struct. Stab. Dyn., 11(3), 495-512.
  19. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016), "Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory an GDQEM", Compos. Struct. 149, 157-169. https://doi.org/10.1016/j.compstruct.2016.04.024
  20. Shen, H.Sh. and Zhang, Ch.L. (2011), "Nonlocal beam model for nonlinear analysis of carbon nanotubes on elastomeric substrates", Comput. Mat. Sci., 50(3), 1022-1029. https://doi.org/10.1016/j.commatsci.2010.10.042
  21. Simsek, M. (2011), "Forced vibration of an embedded singlewalled carbon nanotube traversed by a moving load using nonlocal Timoshenko beam theory", Steel Compos. Struct., Int. J., 11(1), 59-76. https://doi.org/10.12989/scs.2011.11.1.059
  22. Simsek, M. (2014), "Large amplitude free vibration of nanobeams with various boundary conditions based on the nonlocal elasticity theory", Compos. Part B: Eng., 56, 621-628. https://doi.org/10.1016/j.compositesb.2013.08.082
  23. Simsek, M. (2015), "Size dependent nonlinear free vibration of an axially functionally graded AFG microbeam using He's variational method", Compos. Struct., 131, 207-214. https://doi.org/10.1016/j.compstruct.2015.05.004
  24. Tang, M., Ni, Q., Wnag, L., Luo, Y. and Wang, Y. (2014), "Sizedependent vibration analysis of a microbeam in flow based on modified couple stress theory", Int. J. Eng. Sci., 85, 20-30. https://doi.org/10.1016/j.ijengsci.2014.07.006
  25. Togun, N. and Bagdatli, S.M. (2016), "Size dependent nonlinear vibration of the tensioned nanobeam based on the modified couple stress theory", Compos. Part B: Eng., 97, 255-262. https://doi.org/10.1016/j.compositesb.2016.04.074
  26. Wang, L., Xu, Y.Y. and Ni, Q. (2013), "Size-dependent vibration analysis of three-dimensional cylindrical microbeams based on modified couple stress theory: A unified trestment", Int. J. Eng. Sci., 68, 1-10. https://doi.org/10.1016/j.ijengsci.2013.03.004
  27. Wang, L., Liu, W.B. and Dai, H.L. (2015), "Dynamics and instability of current-carrying microbeams in a longitudinal magnetic field", Physica E, 66, 87-92. https://doi.org/10.1016/j.physe.2014.10.010
  28. Yang, W.D., Fang, C.Q. and Wang, X. (2017), "Nonlinear dynamic characteristics of FGCNTs reinforced microbeam with piezoelectric layer based on unifying stress-strain gradient", Compos. Part B: Eng., 111, 372-386. https://doi.org/10.1016/j.compositesb.2016.11.058
  29. Zamanian, M. and Karimiyan, A. (2015), "Analysis of the mechanical behavior of a doubled microbeam configuration under electrostatic actuation", Int. J. Mech. Sci., 93, 82-92. https://doi.org/10.1016/j.ijmecsci.2015.01.011
  30. Zenkour, A.M. and Abouelregal, A.E. (2016), "Thermoelastic interaction in functionally graded nanobeams subjected to timedependent heat flux", Steel Compos. Struct., Int. J., 18(4), 909-924.
  31. Zhang, L.W., Lei, Z.X. and Liew, K.M. (2015), "Free vibration analysis of functionally graded carbon nanotube-reinforced composite triangular plates using the FSDT and element-free IMLS-Ritz method", Compos. Struct., 120, 189-199. https://doi.org/10.1016/j.compstruct.2014.10.009

피인용 문헌

  1. An analytical study on the size dependent longitudinal vibration analysis of thick nanorods vol.5, pp.7, 2018, https://doi.org/10.1088/2053-1591/aacf6e
  2. On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes vol.38, pp.5, 2017, https://doi.org/10.12989/scs.2021.38.5.533