초록
최근 경주지진이 일어나게 되면서 지진의 진동에 의한 구조물의 안정성에 대한 관심이 증가하고 있다. 하지만 국내 앵커분야의 경우 설계하중에 대한 안정성만 고려하고 있을 뿐 진동에 대한 안정성에 대한 연구는 미미한 실정이다. 마찰형 앵커의 경우 시공 중 발생하는 발파진동 등으로 인하여 앵커의 저항능력을 상실한 경우가 종종 보고되고 있다. 이에 반하여 지압형 앵커의 경우 구조적으로 마찰형 앵커에 비하여 진동저항능력이 우수할 것으로 판단되나 이러한 특성에 대한 연구는 거의 진행되지 않았다. 본 연구에서는 새롭게 개발한 지압형 앵커의 발파진동과 지진에 대한 안정성을 검증하기 위하여 현장시험을 수행하였으며 수치해석을 통하여 내진안정성을 검증하였다. 그 결과 현장시험의 경우에는 마찰형 앵커보다 발파진동에 대한 저항성능이 우수하였으며, 수치해석을 이용한 내진해석의 경우 또한 마찰형 앵커에 비하여 저항성능이 우수한 것으로 분석되었다.
Recently, as earthquakes have occurred in Gyeongju, interest in the stability of structures against vibration from earthquakes has increased. In Korea, the capacity of load resistance is mainly considered in the design of anchors. However, the vibration resistance characteristics of anchors have not been fully elucidated. The traditional type of anchor, which is a frictional resistance anchor, is often reported to fail due to vibration in construction procedures, such as blasting. The expansion type of anchor, on the other hand, could have more resistance to vibration but its capability of demonstrating vibratory resistance has to be investigated. In order to verify the vibratory resistance characteristics of expansion anchors against blasting and earthquake vibration, field tests and numerical analyses for seismic wave were performed. Field blasting test results show that the expansion anchor has better capability against vibratory load than does the frictional type anchor. Numerical analysis to earthquake also show that the expansion type anchor provides more resistance than does the frictional type anchor.