DOI QR코드

DOI QR Code

Prism Strength of From-Block Wall Filled with Grout Concrete Containing Steel Fiber

강섬유 보강 콘크리트로 충전된 거푸집형 블록벽의 프리즘 강도

  • 한명현 (크로스구조연구소기술사사무소) ;
  • 서수연 (한국교통대학교 건축공학과)
  • Received : 2017.07.01
  • Accepted : 2017.09.05
  • Published : 2017.09.30

Abstract

Since the void ratio of the form-block is relatively high, when the wall is constructed by using it, a lot of stress is transmitted through the filled concrete. Therefore, in this paper, in order to improve the performance of the grout concrete, the prism test of the form-block was carried out by using the steel fiber mixing ratio of the filled concrete as experimental variables. In addition, for the compressive strength of the form-block, prism strength from the experimental result was compared with the current design formula. Experimental results show that as the steel fiber content of the filled concrete increases, the phenomenon of abrupt drop of the flange after the maximum yield strength is delayed. The prism strength of the form-block can be predicted adequately by using the equation of Japanese standard as in the previous study. However, as the upper limit value of the mortar coefficient, it is appropriate to use 0.55 in consideration of safety in terms of design.

Keywords

Acknowledgement

Supported by : 중소기업청

References

  1. Architectural Institute of Japan (2006). Standards for Structural Design of Masonry Structures, 65-69.
  2. Architectural Institute of Korea (2016). Korean Building Code and Commentary, 330-331.
  3. Architecural Institute of Japan (2009). JASS 7 Masonry Construction, pp.327-328.
  4. KS F 2440 (2014). Standard test method of sampling and testing concrete masonry units.
  5. KS F 4002 (2003). Hollow concrete blocks
  6. Seo, S., & Jeon, S. (2017a). Prism Strength of Form-Block Reinforced by Steel Fiber, Journal of Architectural Institute of Korea, 33(1), 3-10.
  7. Seo, S., & Jeon, S. (2017b). Evaluation of Prism and Diagonal Tension Strength of Masonry Form-Block Walls Reinforced with Steel Fibers. Construction and Building Materials, 152(15), 394-405. https://doi.org/10.1016/j.conbuildmat.2017.06.168
  8. Seo, S., Jeon, S., Kim, K., Kuroki, M., & Kikuchi, K. (2015). Compression behavior of form block walls corresponding to the strength of block and grout concrete. International Journal of Concrete Structures and Materials, 9(1), 21-33. https://doi.org/10.1007/s40069-014-0092-1