DOI QR코드

DOI QR Code

Wavelet-based automatic identification method of axle distribution information

  • Wang, Ning-Bo (School of Civil Engineering, Central South University) ;
  • Ren, Wei-Xin (Department of Civil Engineering, Hefei University of Technology) ;
  • Chen, Zhi-Wei (Department of Civil Engineering, Xiamen University)
  • 투고 : 2016.10.15
  • 심사 : 2017.05.03
  • 발행 : 2017.09.25

초록

Accurately extracting the axle distribution information of a passing vehicle from bridge dynamic responses experiences a key and challenging step in non-pavement bridge weigh-in-motion (BWIM). In this article, the wavelet transformation is adopted and the wavelet coefficient curve is used as a substitute for dynamic response. The driving frequency is introduced and expanded to multi-axle vehicle, and the wavelet coefficient curve on specific scale corresponding to the driving frequency is confirmed to contain obvious axle information. On this basis, an automatic method for axle distribution information identification is proposed. The specific wavelet scale can be obtained through iterative computing, and the false peaks due to bridge vibration can be eliminated through cross-correlation analysis of the wavelet coefficients of two measure points. The integrand function that corresponds to the maximum value of the cross-correlation function is used to identify the peaks caused by axles. A numerical application of the proposed axle information identification method is carried out. Numerical results demonstrate that this method acquires precise axle information from the responses of an axle-insensitive structure (e.g., girder) and decreases the requirement of sensitivity structure of BWIM. Finally, an experimental study on a full-scale simply supported bridge is also conducted to verify the effectiveness of this method.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China (NSFC)

참고문헌

  1. Bakht, B., Mufti, A. and Jaeger, L.G. (2009), "Bridge weighing-inmotion systems and their use in SHM of bridges", Proceeding of the 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Zurich, Switzerland, July.
  2. Chatterjee, P., O'Brien, E.J., Li, Y. and Gonzalez, A. (2006), "Wavelet domain analysis for identification of vehicle axles from bridge measurements", Comput. Struct., 84(28), 1792-1801. https://doi.org/10.1016/j.compstruc.2006.04.013
  3. Chen, Z.W., Cai, Q.L. and Li, J. (2016), "Stress influence line identification of long suspension bridges installed with structural health monitoring systems", Int. J. Struct. Stab. Dyn., 16(04), 1640023. https://doi.org/10.1142/S021945541640023X
  4. European Commission (2001), "Weight-in-motion of axles and vehicles for Europe (WAVE)", General Report, Paris, LCPC.
  5. European Commission (2001), "Weight-in-motion of axles and vehicles for Europe (WAVE)", Report of Work Package 1.2-Bridge WIM Systems, University College Dublin, Ireland.
  6. He, W.Y. and Zhu, S. (2016), "Moving load-induced response of a damaged simply-supported beam and its application in damage localization", J. Vib. Control, 22(16), 3601-3617. https://doi.org/10.1177/1077546314564587
  7. He, W.Y., Zhu, S. and Ren, W.X. (2014), "A wavelet finite element-based adaptive-scale damage detection strategy", Smart Struct. Syst., 14(3), 285-305. https://doi.org/10.12989/sss.2014.14.3.285
  8. Hitchcock, W.A., Salama, T., Zhao, H., Callahan, D., Toutanji, H., Richardson, J. and Jackson, J. (2011), "Expanding portable BWIM technology", UTCA Project No. 08204, Tuscaloosa, AL, USA.
  9. Hitchcock, W.A., Uddin, N., Sisiopiku, V., Salama, T., Kirby, J., Zhao, H. and Richardson, J. (2012), "Bridge Weigh-in-Motion (BWIM) System Testing and Evaluation", UTCA Project No. 07212, Tuscaloosa, AL, USA.
  10. ISO 8608 (1995), Mechanical vibration-road surface profiles-reporting of measured data.
  11. Kobayashi, Y., Miki, C. and Tanabe, A. (2004), "Longterm monitoring of traffic loads by automaticreal timeweigh in motio", J. Struct. Mech. Earthq. Eng., 69(773), 99-111.
  12. Lechner, B., Lieschnegg, M., Mariani, O., Pircher, M. and Fuchs, A. (2010), "A wavelet-based bridge weigh-in-motion system", Int. J. Smart Sens. Intel. Syst., 3(4), 573-591.
  13. Liu, J.L., Wang, Z.C., Ren, W.X. and Li, X.X. (2015), "Structural time-varying damage detection using synchrosqueezing wavelet transform", Smart Struct. Syst., 15(1), 119-133. https://doi.org/10.12989/sss.2015.15.1.119
  14. Lydon, M., Taylor, S.E., Robinson, D., Mufti, A. and O'Brien, E.J. (2016), "Rencent development in bridge weigh in motion", J. Civil Struct. Hlth. Monit., 6(1), 69-81. https://doi.org/10.1007/s13349-015-0119-6
  15. Mcnulty, P. and O'Brien, E.J. (2003), "Testing of bridge weigh-inmotion system in a sub-Arctic climate", J. Test. Eval., 31(6), 497-506.
  16. Moses, F. (1979), "Weigh-in-motion system using instrumented bridges", Tran. Eng. J., ASCE, 105(3), 233-249.
  17. O'Brien, E.J., Znidaric, A. and Ojio, T. (2008), "Bridge weigh-in-motion: Latest developments and applications worldwide", Proceeding of the International conference on heavy vehicles incorporating heavy vehicle transport technology and weigh-in-motion, Paris, France, May.
  18. Park, M.S., Jo, B.W., Lee, J.W. and Kim, S.K. (2008), "Development of PSC I girder bridge weigh-in-motion system without axle detector", J. Korean Soc. Civil Eng., 28(5A), 673-683.
  19. Quilligan, M., Karoumi, R. and O'Brien, E.J. (2002), "Development and testing of a 2-dimensional multi-vehicle bridgeWIM algorithm", Proceeding of the 3rd international conference on weigh-in-motion (ICWIM3), Orlando, USA, May.
  20. Sakayabagi, H., Sasaki E., Theeraphong C., Suzuki, K., Ishikawa, Y., Yamada, H. and Katsuchi, H. (2007), "Analysis of axle position information from strain history data with long influence lines", Psychophys., 9(3), 318-333. https://doi.org/10.1111/j.1469-8986.1972.tb03215.x
  21. Wang, C., Ren, W.X., Wang, Z.C. and Zhu, H.P. (2014), "Time-varying physical parameter identification of shear type structures based on discrete wavelet transform", Smart Struct. Syst., 14(5), 831-845. https://doi.org/10.12989/sss.2014.14.5.831
  22. Xiao, Z.G., Yamada, K., Inoue, J. and Yamaguchi, K. (2006), "Measurement of truck axle weight by instrumenting longitudinal ribs of orthotropic bridge", J. Bridge Eng., 11(5), 526-532. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:5(526)
  23. Yang, Y.B. and Lin, C.W. (2005), "Vehicle-bridge interaction dynamics and potential applications", J. Sound Vib., 284(1-2), 205-226. https://doi.org/10.1016/j.jsv.2004.06.032
  24. Yang, Y.B., Lin, C.W. and Yan, J.D. (2004), "Extracting the bridge frequencies from the dynamic response of a passing vehicle", J. Sound Vib., 272(3-5), 471-493. https://doi.org/10.1016/S0022-460X(03)00378-X
  25. Yin, X.F., Fang, Z. and Cai, C.S. (2011), "Lateral vibration of high-pier bridge under moving vehicular loads", J. Bridge Eng., 16(3), 400-412. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000170
  26. Zhu, X.Q. and Law, S.S. (2005), "Bridge dynamic responses due to road surface roughness and braking of vehicle", J. Sound Vib., 282(3-5), 805-830. https://doi.org/10.1016/j.jsv.2004.03.032
  27. Zolghadri, N., Halling, M., Barr, P. and Petroff, S. (2013), "Identification of truck types using strain sensors include co-located strain gauges", Structures Congress, 363-375.