DOI QR코드

DOI QR Code

반 건조 하수슬러지와 폐플라스틱 혼합물의 파일롯 규모 연속식 열분해에 의한 생산물과 발생 오염물질

Products and pollutants of half dried sewage sludge and waste plastic co-pyrolysis in a pilot-scale continuous reactor

  • 김용화 (서울과학기술대학교 에너지환경대학원) ;
  • 천승규 (서울과학기술대학교 에너지환경대학원)
  • Kim, YongHwa (Graduate School of Energy & Environment, Seoul National University of Science & Technology) ;
  • Chun, Seung-Kyu (Graduate School of Energy & Environment, Seoul National University of Science & Technology)
  • 투고 : 2017.05.26
  • 심사 : 2017.06.19
  • 발행 : 2017.06.30

초록

반 건조 소화 하수슬러지와 폐플라스틱을 혼합하여 파일롯 규모(85.3kg/hr)의 연속식 저온($510^{\circ}C{\sim}530^{\circ}C$) 열분해 실험을 하였다. 실험결과 열분해가스 발생량은 투입물 건량의 최대 68.3%, 발열량은 $40.9MJ/Nm^3$이었으며, 연속식 열분해에 따른 외기 유입율이 19.6%이었다. 오일은 투입물 건량의 4.2%가 발생하였고, 저위발열량은 32.5 MJ/kg이었으며 시설부식 등을 일으킬 수 있는 황과 염소의 함량이 각각 0.2% 이상이었다. 투입물 건량의 27.5%가 발생한 탄화물의 저위 발열량은 10.2 MJ/kg이었고, 용출시험 결과 지정폐기물에 해당하지 않았다. 열분해가스의 연소 배가스는 일산화탄소, 황산화물, 시안화수소 등의 배출농도가 특히 높았고, 다이옥신 (PCDDs/DFs)은 $0.034ng-TEQ/Sm^3$로서 법적 기준치 이내였다. 건조 배가스 응축으로 발생한 폐수는 수질오염물질 47개 항목 중 총질소, n-H 추출물질, 시안 등의 고농도 항목이 많아 전처리 후 하수처리장 등에서의 병합처리 방식을 고려할 필요가 있었다.

A continuous low temperature ($510^{\circ}C{\sim}530^{\circ}C$) pyrolysis experiment in a pilot-scale of 85.3 kg/hr was carried out by the mixed feedstock of half dried digested sewage sludge and waste plastics. As a result, the amount of pyrolysis gas generated was maximum 68.3% of input dry mass and scored $40.9MJ/Nm^3$ of lower heating value (LHV), and the percentage of air inflow caused by continuous pyrolysis was 19.6%. The oil was produced 4.2% of the input dry mass, and the LHV was 32.5 MJ/kg. The sulfur and chlorine contents, which could cause corrosion of the facility, were found to be 0.2% or more respectively. The carbide generated was 27.5% of the input dry mass which shows LHV of 10.2 MJ/kg, and did not fall under designated waste from the elution test. The concentration of carbon monoxide, sulfur oxides and hydrogen cyanide of emitted flu gas from pyrolysis gas combustion was especially high, and dioxin (PCDDs/DFs) was within the legal standards as $0.034ng-TEQ/Sm^3$. Among the 47 water pollutant contents of waste water generated from dry flue gas condensation, several contents such as total nitrogen, n-H extract and cyanide showed high concentration. Therefore, the merge treatment in the sewage treatment plants after pre-treatment could be considered.

키워드

참고문헌

  1. G. Bertanza, P. Baroni, M. Canato, Ranking sewage sludge management strategies by means of DecisionSupport Systems: A case study, Resour., Conserv. Recycl., 110, 2 (2016).
  2. L. Zhang, C. Xu, P. Champagne, Energy recovery from secondary pulp/paper-mill sludge and sewage sludge with supercritical water treatment, Bioresour. Technol., 101, 2715 (2010).
  3. W. Yu, J. Yang, X. Wu, Y. Gu, J. Xiao, Jiangwei Yu, Yafei Shi, J. Wang, S. Liang, B. Liu, H. Hou, J. Hu, Study on dewaterability limit and energy consumption in sewage sludge electro-dewatering by in-situ linear sweep voltammetry analysis, Chem. Eng. J., 317, 981 (2017).
  4. E.H. Kim, J.K. Cho, S.B. Yim, Digested sewage sludge solidification by converter slag for landfill cover, Chemosphere, 59, 388 (2005).
  5. Aranzazu Pena, Maria Dolores Mingorance, Sabina Rossini-Oliva, Soil quality improvement by the establishment of a vegetative cover in a mine soil added with composted municipal sewage sludge, J. Geochem. Explor., 157, 182 (2015).
  6. Caterina Maulini-Duran, A. Artola, X. Font, A. Sanchez, A systematic study of the gaseous emissions from biosolids composting: Raw sludge versus anaerobically digested sludge, Bioresour. Technol., 147, 50 (2013).
  7. M. Tanczuk, W. Kostowski, M. Karaa, Applying waste heat recovery system in a sewage sludge dryer - A technical and economic optimization, Energy Convers. Manag., 125, 127 (2016).
  8. I. Fonts, G. Gea, M. Azuara, J. Abrego, J. Arauzo, Sewage sludge pyrolysis for liquid production: A review, Renew. Sustain. Energy Rev., 16, 2784- 2785 (2012).
  9. Y. Cao, A. Pawlowski, Sewage sludgeto- energy approaches based on anaerobi, Renew. Sustain. Energy Rev., 16, 1659-1660 (2012).
  10. B. Bratina, A. Sorgo, J. Kramberger, U. Ajdnik, L.F. Zemljic, J. Ekart, R. Safaric, From municipal/industrial wastewater sludge and FOG to fertilizer: A proposal for economic sustainable sludge management, J. Environ. Manag., 183, 1013 (2016).
  11. H.J. Huang, T. Yang, F.Y. Lai, G.Q. Wu, Co-pyrolysis of sewage sludge and sawdust/rice straw for the production of biochar, J Anal. Appl. Pyrolysis, http://dx.doi.org/10.1016/j.jaap.2017.04.018 (2017).
  12. X. Wang, B. Zhao, X. Yang, Co-pyrolysis of microalgae and sewage sludge: Biocrude assessment and char yield prediction, Energy Convers. Manag., 117, 326-334 (2016). https://doi.org/10.1016/j.enconman.2016.03.013
  13. Nadia Ruiz-Gomez, V. Quispe, J. Abrego, Maria Atienza-Martinez, M.B. Murillo, G. Gea, Co-pyrolysis of sewage sludge and manure, Waste Manag., 59, 211-221 (2017). https://doi.org/10.1016/j.wasman.2016.11.013
  14. L. Chen, S. Wang, H. Meng, Z. Wu, J. Zhao, Synergistic effect on thermal behavior and char morphology analysis during co-pyrolysis of paulownia wood blended with different plastics waste, Appl. Therm. Eng., 111, 834-846 (2017). https://doi.org/10.1016/j.applthermaleng.2016.09.155
  15. X. Zhang, H. Lei, L. Zhu, X. Zhu, M. Qian, G. Yadavalli, J. Wu, S. Chen, Thermal behavior and kinetic study for catalytic co-pyrolysis of biomass with plastics, Bioresour. Technol., 220, 233-238 (2016). https://doi.org/10.1016/j.biortech.2016.08.068
  16. J. Chattopadhyay, T.S. Pathak, R. Srivastava, A.C. Singh, Catalytic co-pyrolysis of paper biomass and plastic mixtures (HDPE(high density polyethylene), PP (polypropylene) and PET(polyethylene terephthalate)) and product analysis, Energy, 103, 513-521 (2016). https://doi.org/10.1016/j.energy.2016.03.015
  17. Alejandro Jaramillo-Arango, I. Fonts, F. Chejne, J. Arauzo, Product compositions from sewage sludge pyrolysis in a fluidized bedand correlations with temperature, J Anal. Appl. Pyrolysis, 121, 290-292 (2016).
  18. Shafferina Dayana Anuar Sharuddin, Faisal Abnisa, Wan Mohd Ashri Wan Daud, Mohamed Kheireddine Aroua, A review on pyrolysis of plastic wastes, Energy Convers. Manag., 115, 324 (2016).
  19. J.G. Park, J.K. Kim, B.H. Lee, The Study on Characteristics of Polystyrene by Low Temperature Pyrolysis by using Co and Mo Dispersed Catalysts, J Korean Oil Chem. Soc., 33(4), 681-684 (2016).
  20. L. Yang, X. Ge, C. Wan, F. Yuc, Y. Li, Progress and perspectives in converting biogas to transportation fuels, Renew. Sustain. Energy Rev., 40, 1135-1139 (2014).
  21. C.H. Ting, H.H. Chen, C.C. Yen, A PID ratio control for removal of HCl=SOX in flue gas from refuse municipal incinerators, Control Eng. Pract., 16, 287-291 (2008).