References
- Vijeesh V and Prabhu KN, T Indian I Metals, "Review of microstructure evolution in hypereutectic Al-Si alloys and its effect on wear properties", 67 (2014) 1-18. https://doi.org/10.1007/s12666-013-0327-x
- Ravi KR, Pillai RM, Amaranathan KR, Pai BC and Chakraborty M, J Alloy Compd, "Fluidity of aluminum alloys and composites: A review", 456 (2008) 201-210. https://doi.org/10.1016/j.jallcom.2007.02.038
- Elmadagli M, Perry T and Alpas AT, Wear, "A parametric study of the relationship between microstructure and wear resistance of Al-Si alloys", 262 (2007) 79-92. https://doi.org/10.1016/j.wear.2006.03.043
- Shaha SK, Czerwinski F, Kasprzak W, Friedman J and Chen DL, Mater Design, "Microstructure and mechanical properties of Al-Si cast alloy with additions of Zr-V-Ti", 83 (2015) 801-812. https://doi.org/10.1016/j.matdes.2015.05.057
- Rana RS, Purohit R and Das S, IJSRP, "Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites", 2 (212) 1-7.
- Boyuk U, Met Mater Int, "Physical and mechanical properties of Al-Si-Ni eutectic alloy", 18 (2012) 933-938. https://doi.org/10.1007/s12540-012-6004-5
- Jeong CY, Mate Trans, "High temperature mechanical properties of Al-Si-Mg-(Cu) alloys for automotive cylinder heads", 54 (2013) 588-594. https://doi.org/10.2320/matertrans.M2012285
- Grosselle F, Timelli G, Bonollo F, Tiziani A and Corte ED, Metall Ital, "Correlation between microstructure and mechanical properties of Al-Si cast alloys", 101 (2009) 25-32.
- Djurdjevic MB and Grzincic MA, AFE, "The effect of major alloying elements on the size of the secondary dendrite arm spacing in the as-cast Al-Si-Cu alloys", 12 (2012) 19-24.
- Dong QZ, Choi YS, Hong JH and Hwang HY, China Foundry, "Prediction of mechanical properties of Al alloys with change of cooling rate", 9 (2012) 381-386.
- Li Z, Samuel AM, Samuel FH, Ravindran C, Valtierra S and Doty HW, Mater Sci Eng A, "Parameters controlling the performance of AA319-type alloys: Part I. Tensile properties", 367 (2004) 96-110. https://doi.org/10.1016/j.msea.2003.09.090
- Pavlovic-Krstic J, Bahr R, Krstic G and Putic S, Metallurgija, "The effect of mould temperature and cooling conditions on the size of secondary dendrite arm spacing in Al-7Si-3Cu alloy", 15 (2009) 105-113.
- Kattamis TZ and Flemings MC, T Metall Soc AIME, "Dendrite morphology, microsegregation and homogenization of 4340 low alloy steel", 233 (1965) 992-999.
- Ardell AJ, Acta Metall, "The effect of volume fraction on particle coarsening: theoretical considerations", 20 (1972) 61-71. https://doi.org/10.1016/0001-6160(72)90114-9
- Voorhees PW and Glicksman ME, Metall Trans, "Ostwald ripening during liquid phase sintering - Effect of volume fraction on coarsening kinetics", 15A (1984) 1081-1088.
- Mortensen A, Metall Trans, "On the rate of dendrite arm coarsening", 22A (1991) 569-574.
- Petzow G, Metallographic etching, 2nd Ed, ASM international (1999) 57-64.
- Vandersluis E and Ravindran C, Metallogr Microstruct Anal, "Comparison of measurement methods for secondary dendrite arm spacing", 6 (2017) 89-94. https://doi.org/10.1007/s13632-016-0331-8
- Stefanescu DM, Int J Metalcast, "Thermal analysis - Theory and applications in metalcasting", 9 (2015) 7-22.
- Chadwick GA, Metallography of phase transformations, Butterworth & Co (Publishers) Ltd, London (1972) 107-147.
- Zhang H, Nakajima K, Lei H and He J, ISIJ Int, "Restrictions of physical properties on solidification microstructures of Albased binary alloys by cellular automaton", 50 (2010) 1836-1842.