DOI QR코드

DOI QR Code

Fragility characteristics of skewed concrete bridges accounting for ground motion directionality

  • Jeon, Jong-Su (Department of Civil Engineering, Andong National University) ;
  • Choi, Eunsoo (Department of Civil Engineering, Hongik University) ;
  • Noh, Myung-Hyun (Structure Research Group, Steel Solution Marketing Division, POSCO)
  • 투고 : 2017.02.16
  • 심사 : 2017.05.29
  • 발행 : 2017.09.10

초록

To achieve this goal, two four-span concrete box-girder bridges with typical configurations of California highway bridges are selected as representative bridges: an integral abutment bridge and a seat-type abutment bridge. A detailed numerical model of the representative bridges is created in OpenSees to perform dynamic analyses. To examine the effect of earthquake incidence angle on the fragility of skewed bridges, the representative bridge models are modified with different skew angles. Dynamic analyses for all bridge models are performed for all earthquake incidence angles examined. Simulated results are used to develop demand models and component and system fragility curves for the skewed bridges. The fragility characteristics are compared with regard to earthquake incidence angle. The results suggest that the earthquake incidence angle more significantly affects the seismic demand and fragilities of the integral abutment bridge than the skewed abutment bridge. Finally, a recommendation to account for the randomness due to the ground motion directionality in the fragility assessment is made in the absence of the predetermined earthquake incidence angle.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea

참고문헌

  1. ASCE/SEI 41-13 (2014), Seismic evaluation and retrofit of existing buildings, American Society of Civil Engineers, Reston, VA, USA.
  2. Baker, J.W., Shahi, S.K. and Jayaram, N. (2011), "New ground motion selection procedures and selected motions for the PEER Transportation Research Program", Report No. PEER Report 2011/03, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  3. Bhatnagar, U.R. and Banerjee, S. (2015), "Fragility of skewed bridges under orthogonal seismic ground motions", Struct. Infrastruct. Eng., 11(9), 1113-1130. https://doi.org/10.1080/15732479.2014.936880
  4. Caltrans (2013a), Seismic design criteria (SDC) version 1.7, Office of Structures Design, California Department of Transportation, Sacramento, CA, USA.
  5. Caltrans (2013b), Guidelines on foundation loading and deformation due to liquefaction induced lateral spreading, Caltrans internal design guideline, California Department of Transportation, Sacramento, CA, USA.
  6. Caltrans (2014), Bridges with skewed supports, Memo to designers, California Dept. of Transportation, Sacramento, CA, USA.
  7. Deepu, S.P., Prajapat, K. and Ray-Chaudhuri, S. (2014), "Seismic vulnerability of skew bridges under bi-directional ground motions", Eng. Struct., 71, 150-160. https://doi.org/10.1016/j.engstruct.2014.04.013
  8. Dutta, A. and Mander, J.B. (1998), "Seismic fragility analysis of highway bridges", INCEDE-MCEER Center-to-Center Workshop on Earthquake Engineering Frontiers in Transportation Systems, Tokyo, Japan.
  9. Ellingwood, B.R. and Wen, Y.K. (2005), "Risk-benefit-based design decisions for low-probability/high consequence earthquake events in Mid-America", Prog. Struct. Eng. Mater., 7(2), 56-70. https://doi.org/10.1002/pse.191
  10. Ellingwood, B.R., Celik, O.C. and Kinali, K. (2007), "Fragility assessment of building structural systems in Mid-America", Earthq. Eng. Struct. Dyn., 36(13), 1935-1952. https://doi.org/10.1002/eqe.693
  11. Elwood, K.J. and Eberhard, M.O. (2009), "Effective stiffness of reinforced concrete columns", ACI Struct. J., 106(4), 476-484.
  12. Jeon, J.-S., DesRoches, R., Kim, T. and Choi, E. (2016), "Geometric parameters affecting seismic fragilities of curved multi-frame concrete box-girder bridges with integral abutments", Eng. Struct., 122, 121-143. https://doi.org/10.1016/j.engstruct.2016.04.037
  13. Jeon, J. -S., Lowes, L.N., DesRoches, R. and Brilakis, I. (2015), "Fragility curves for non-ductile reinforced concrete frames that exhibit different component response mechanisms", Eng. Struct., 85, 127-143. https://doi.org/10.1016/j.engstruct.2014.12.009
  14. Kaviani, P., Zareian, F. and Taciroglu, E. (2014), "Performancebased seismic assessment of skewed bridges", Report No. PEER 2014/01, Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
  15. Kowalsky, M.J. and Priestley, M.J.N. (2000), "Improved analytical model for shear strength of circular reinforced concrete columns in seismic regions", ACI Struct. J., 97(3), 388-396.
  16. Mackie, K.R., Cronin, K.J. and Nielson, B.G. (2011), "Response sensitivity of highway bridges to randomly oriented multicomponent earthquake excitation", J. Earthq. Eng., 15(6), 850-876. https://doi.org/10.1080/13632469.2010.551706
  17. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  18. Mangalathu, S., Jeon, J.S., Padgett, J.E. and DesRoches, R. (2016), "ANCOVA-based grouping of bridge classes for seismic fragility assessment", Eng. Struct., 123, 379-394. https://doi.org/10.1016/j.engstruct.2016.05.054
  19. McKenna, F. (2011), "OpenSees: A framework for earthquake engineering simulation", Comput. Sci. Eng., 13(4), 58-66.
  20. Muthukumar, S. and DesRoches, R. (2006), "A Hertz contact model with non-linear damping for pounding simulation", Earthq. Eng. Struct. Dyn., 35(7), 811-828. https://doi.org/10.1002/eqe.557
  21. Nielson, B.G. (2005), "Analytical fragility curves for highway bridges in moderate seismic zones", Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA, USA.
  22. Padgett, J.E. (2007), "Seismic vulnerability assessment of retrofitted bridges using probabilistic methods", Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA, USA.
  23. Ramanathan, K., Jeon, J.S., Zakeri, B., DesRoches, R. and Padgett, J.E. (2015), "Seismic response prediction and modeling considerations for curved and skewed concrete box-girder bridges", Earthq. Struct., 9(6), 1153-1179. https://doi.org/10.12989/eas.2015.9.6.1153
  24. Ramanathan, K.N. (2012), "Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy", Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, GA, USA.
  25. Roger, L. and Seo, J. (2017), "Vulnerability sensitivity of curved precast concrete I-girder bridges with various configurations subjected to multiple ground motions", J. Bridge Eng., 22(2), 04016118. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000973
  26. Seo, J. and Linzell, D.G. (2012), "Horizontally curved steel bridge seismic vulnerability assessment", Eng. Struct., 34, 21-32. https://doi.org/10.1016/j.engstruct.2011.09.008
  27. Seo, J. and Linzell, D.G. (2013a), "Nonlinear seismic response and parametric examination of horizontally curved steel bridges using 3D computational models", J. Bridge Eng., 18(3), 220-231. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000345
  28. Seo, J. and Linzell, D.G. (2013b), "Use of response surface metamodels to generate system level fragilities for existing curved steel bridges", Eng. Struct., 52, 642-653. https://doi.org/10.1016/j.engstruct.2013.03.023
  29. Shamsabadi, A., Khalili-Tehrani, P., Stewart, J.P. and Taciroglu, E. (2010), "Validated simulation models for lateral response of bridge abutments with typical backfills", J. Bridge Eng., 15(3), 302-311. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000058
  30. Silva, P.F., Megally, S. and Seible, F. (2009), "Seismic performance of sacrificial exterior shear keys in bridge abutments", Earthq. Spectra, 25(3), 643-664. https://doi.org/10.1193/1.3155405
  31. Sullivan, I. and Nielson, B.G. (2010), "Sensitivity analysis of seismic fragility curves for skewed multi-span simply supported steel girder bridges", ASCE Structures Congress, Orlando, FL, USA, May.
  32. Taskari, O. and Sextos, A. (2015), "Multi-angle, multi-damage fragility curves for seismic assessment of bridges", Earthq. Eng. Struct. Dyn., 44(13), 2281-2301. https://doi.org/10.1002/eqe.2584
  33. Torbol, M. and Shinozuka, M. (2012), "Effect of the angle of seismic incidence on the fragility curves of bridges", Earthq. Eng. Struct. Dyn., 41(4), 2111-2124. https://doi.org/10.1002/eqe.2197
  34. Yang, C.S.W., Werner, S.D. and DesRoches, R. (2015), "Seismic fragility analysis of skewed bridges in the central southeastern United States", Eng. Struct., 83, 116-128. https://doi.org/10.1016/j.engstruct.2014.10.025

피인용 문헌

  1. Analysis on the Time-Varying Fragility of Offshore Concrete Bridge vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/2739212
  2. Bayesian demand model based seismic vulnerability assessment of a concrete girder bridge vol.9, pp.4, 2017, https://doi.org/10.12989/acc.2020.9.4.337