References
- Apte, S.V., M. Gorokhovski, and P. Moin (2003) LES of atomizing spray with stochastic modeling of secondary breakup, International Journal of Multiphase Flow, 29, 1503-1522. https://doi.org/10.1016/S0301-9322(03)00111-3
- Baumgarten, C., J. Stegemann, and G.P. Merker (2002) A NEW MODEL FOR CAVITATION INDUCED PRIMARY BREAK-UP OF DIESEL SPRAYS, ILASS-Europe, 9-11.
- Bekdemir, C. (2008) Numerical Modeling of Diesel Spray Formation and Combustion.
- Chen, K., K.S. Martirosyan, and D. Luss (2011) Transient temperature rise during regeneration of diesel particulate filter, Chemical Engineering Journal, 176-177, 144-150. https://doi.org/10.1016/j.cej.2011.02.079
- Egerer, C.P., H. Stefan, J.S. Steffen, and A.A. Nikolaus (2014) Large-eddy simulation of turbulent cavitating flow in a micro channel, Physics of Fluids, 26, 085102. https://doi.org/10.1063/1.4891325
- He, Z., C. Yuhang, L. Xianyin, W. Qian, and G. Genmiao (2016) Experimental visualization and LES investigations on cloud cavitation shedding in a rectangular nozzle orifice, International Communications in Heat and Mass Transfer, 76, 108-116. https://doi.org/10.1016/j.icheatmasstransfer.2016.05.033
- He, Z., S. Zhuang, W. Qian, Z. Wenjun, and T. Xicheng (2015) Experimental study of cavitating flow inside vertical multi-hole nozzles with different length-diameter ratios using diesel and biodiesel, Experimental Thermal and Fluid Science, 60, 252-262. https://doi.org/10.1016/j.expthermflusci.2014.09.015
- Huh, K. and A. Gosman (1991) A phenomenological model of diesel spray atomization, In: Proceedings of the international conference on multiphase flows.
- IARC (2012) Diesel Engine Exhaust Carcinogenic, International Agency of Research on Cancer.
- Lee, Y.J., D.H. Kim, S.H. Kim, J.S. Kim, D.C. Shin, and Y.W. Lim (2016) Diesel Exhaust Particle Exposure and its Pulmonary Function Effects, Journal of Korean Society for Atomospheric Environment, 32(5), 457-468. https://doi.org/10.5572/KOSAE.2016.32.5.457
- Liu, A.B., D. Mather, and R.D. Reitz (1993) Modeling the effects of drop drag and breakup on fuel sprays. DTIC Document.
- Mohan, B., W. Yang, W. Yu, and K.L. Tay (2017) Numerical analysis of spray characteristics of dimethyl ether and diethylether fuel, Applied Energy, 185, 1403-1410. https://doi.org/10.1016/j.apenergy.2016.01.128
- Molina, S., F.J. Salvador, M. Carreres, and D. Jaramillo (2014) A computational investigation on the influence of the use of elliptical orifices on the inner flow and cavitation development in diesel injector nozzles, Energy Conversion and Management, 79, 114-127. https://doi.org/10.1016/j.enconman.2013.12.015
- Nonnenmacher, S. and M. Piesche (2000) Design of hollow cone pressure swirl nozzles to atomize Newtonian Fluids, Chemical Engineering Science, 55, 4339-4348. https://doi.org/10.1016/S0009-2509(00)00043-9
- Park, D.S., T.J. Lee, Y.I. Lee, W.S. Jeong, S.B. Kwon, D.S. Kim, and K.Y. Lee (2017) Effect of a fuel activation device (FAD) on particulate matter and black carbon emissions from diesel locomotive engine, Science of the Total Environment, 575, 97-102. https://doi.org/10.1016/j.scitotenv.2016.09.235
- Park, J.H., J.C. Park, and S.J. Uhm (2010) Development of the method estimating sections occurring intensive PM10 in a subway tunnel, Journal of Korean society of transportation, 28(6), 121-131.
- Park, S.K., S.C. Woo, H.G. Kim, and K.Y. Lee (2016) The characteristics of spray using diesel water emulsified fuel in a diesel engine, Applied Energy, 176, 209-220. https://doi.org/10.1016/j.apenergy.2016.05.069
- Payri, R., F.J. Salvador, J. Gimeno, and O. Venegas (2013) Study of cavitation phenomenon using different fuels in a transparent nozzle by hydraulic characterization and visualization, Experimental Thermal and Fluid Science, 44, 235-244. https://doi.org/10.1016/j.expthermflusci.2012.06.013
- Qiu, T., X. Song, Y. Lei, H. Dai, C. Cao, H. Xu, and X. Feng (2016a) Effect of back pressure on nozzle inner flow in fuel injector, Fuel, 173, 79-89. https://doi.org/10.1016/j.fuel.2016.01.044
- Qiu, T., X. Song, Y. Lei, X. Liu, X. An, and M. Lai (2016b) Influence of inlet pressure on cavitation flow in diesel nozzle, Applied Thermal Engineering, 109, 364-372. https://doi.org/10.1016/j.applthermaleng.2016.08.046
- Reitz, R.D. (1987) Modeling atomization processes in highpressure vaporizing sprays, Atomisation spray Technol, 3, 309-337.
- Salvadora, F.J., J. Martinez-Lopeza, J.-V. Romero, and M.-D. Rosello (2013) Computational study of the cavitation phenomenon and its interaction with the turbulence developed in diesel injector nozzles by Large Eddy Simulation (LES), Mathematical and Computer Modelling, 57, 1656-1662. https://doi.org/10.1016/j.mcm.2011.10.050
- Salvadora, F.J., J.-V. Romero, M.-D. Rosello, and D. Jaramillo (2016) Numerical simulation of primary atomization in diesel spray at low injection pressure, Journal of Computational and Applied Mathematics, 291, 94-102. https://doi.org/10.1016/j.cam.2015.03.044
- Schmidt, D., I. Nouar, P. Senecal, C.J. Rutland, J.K. Martin, R.D. Reitz, and J.A. Hoffman (1999) Pressure-Swirl Atomization in the Near Field, SAE Technical Paper, doi:10.4271/1999-01-0496.
- Schmidt, D.P. and C. Rutland (2000) A new droplet collision algorithm, Journal of Computational Physics, 164, 62-80. https://doi.org/10.1006/jcph.2000.6568
- Schnerr, G.H. and J. Sauer (2001) Physical and numerical modeling of unsteady cavitation of unsteady cavitation dynamics, Fourth international conference on Multiphase Flow, New Orleans, USA, P.1.
- Som, S., S.K. Aggarwal, E.M. El-Hannouny, and D.E. Longman (2010) Investigation of Nozzle Flow and Cavitation Characteristics in a Diesel Injector, Journal of Engineering for Gas Turbines and Power, 132, 042802. https://doi.org/10.1115/1.3203146
- Sou, A., B. Bicer, and A. Tomiyama (2014) Numerical simulation of incipient cavitation flow in a nozzle of fuel injector, Computers & Fluids, 103, 42-48. https://doi.org/10.1016/j.compfluid.2014.07.011
- Sou, A., S. Hosokawa, and A. Tomiyama (2007) Effects of cavitation in a nozzle on liquid jet atomization, International Journal of Heat and Mass Transfer, 50, 3575-3582. https://doi.org/10.1016/j.ijheatmasstransfer.2006.12.033
- Sou, A., S. Hosokawa, and A. Tomiyama (2010) Cavitation in nozzles of plain orifice atomizers with various length-to-diameter ratios, Atomization and Sprays, 20(6), 513-524. https://doi.org/10.1615/AtomizSpr.v20.i6.30
- Suh, H.K. and C.S. Lee (2008) Effect of cavitation in nozzle orifice on the diesel fuel atomization characteristics, International Journal of Heat and Fluid Flow, 2, 1001-1009.
- Sun, Z.Y., G.X. Li, C. Chen, Y.S. Yu, and G.X. Gao (2015) Numerical investigation on effects of nozzle's geometric parameters on the flow and the cavitation characteristics within injector's nozzle for a highpressure common-rail DI diesel engine, Energy Conversion and Management, 89, 843-861. https://doi.org/10.1016/j.enconman.2014.10.047
- Wang, F., Z. He, J. Liu, and Q. Wang (2015) Diesel nozzle geometries on spray characteristics with a spray model coupled with nozzle cavitating flow, International Journal of Automotive Technology, 16(4), 539-549. https://doi.org/10.1007/s12239-015-0055-9
- Yin, B., S. Yu, H. Jia, and J. Yu (2016) Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure, International Journal of Heat and Fluid Flow, 59, 1-9. https://doi.org/10.1016/j.ijheatfluidflow.2016.01.005
- Yu, S., B. Yin, H. Jia, and J. Yu (2017) Numerical research on micro diesel spray characteristics under ultra-high injection pressure by Large Eddy Simulation (LES), International Journal of Heat and Fluid Flow, 64, 129-136. https://doi.org/10.1016/j.ijheatfluidflow.2017.03.003
- Yuan, W., J. Sauer, and G.H. Schnerr (2001) Modeling and computation of unsteady cavitation flows in injection nozzles, Mecanique Et Industries, 2, 383-394. https://doi.org/10.1016/S1296-2139(01)01120-4
Cited by
- Improvement of liquid fuel atomization for an internal engine using an auxiliary device vol.35, pp.10, 2018, https://doi.org/10.1007/s11814-018-0106-9
- Evaluation of the cavitation effect on liquid fuel atomization by numerical simulation pp.1975-7220, 2018, https://doi.org/10.1007/s11814-018-0141-6