참고문헌
- Armor, J.N. (1995) Catalytic Removal of Nitrogen Oxide: Where Are the Opportunities?, Catalysis Today, 26, 99-105. https://doi.org/10.1016/0920-5861(95)00132-Y
- Artz, E. and L. Schult (1991) New materials by mechanical alloying techniques, Material and Manufacturing Process, 6, 733-736. https://doi.org/10.1080/10426919108934802
-
Bulushev, D.A., L. Kiwi-Minsker, F. Rainone, and A. Renken (2002) Characterization of surface vanadia forms on V/
$TiO_2$ oxide catalyst via Temperature-Programmed reduction in hydrogen and spectroscopic method, Journal of Catalysis, 205, 115-122. https://doi.org/10.1006/jcat.2001.3427 - Cho, C.H. and S.K. Ihm (2002) Development of new vanadiumbased oxide catalysts for decomposition of chlorinated aromatic pollutants, Environmental Science & Technology, 36, 1600-1606. https://doi.org/10.1021/es015687h
- Cooper, C.D. and F.C. Alley (2002) Air pollution control: A Design approach, Waveland Press.
-
Dutta, H. and S.K. Pradhan (2003) Microstructure characterization of high energy ball-milled nanocrystalline
$V_2O_5$ by rietveld analysis, Materials Chemistry and Physics, 77, 868-877. https://doi.org/10.1016/S0254-0584(02)00169-4 - Gaffet, E., M. Abdellaoui, and N. Malhouroux-Gaffet (1995) Formation of nanostructural materials induced by mechanical processings, Materials Transactions JIM, 36, 198-209. https://doi.org/10.2320/matertrans1989.36.198
-
Gajovie, A., M. Stubicar, M. Ivanda, and K. Furic (2001) Raman spectroscopy of ball-milled
$TiO_2$ , Journal of Molecular Structure, 563, 315-320. -
Koebel, M., M. Elsener, and G. Madia (2001) Reaction pathway in the selective catalytic reduction process with NO and
$NO_2$ at low temperatures, Industrial & Engineering Chemistry Researtch, 40, 52-59. https://doi.org/10.1021/ie000551y -
Kwon, D.W., K.H. Park, and S.C. Hong (2013) The influence on SCR activity of the atomic structure of
$V_2O_5$ /$TiO_2$ catalysts prepared by a mechanochemical method, Applied Catalysis A: General, 451, 227-235. https://doi.org/10.1016/j.apcata.2012.09.050 - Kwon, D.W., S.M. Lee, and S.C. Hong (2015) Influence of attrition milling on V/Ti catalysts for the selective oxidation of ammonia, Applied Catalysis A: General, 505, 557-565. https://doi.org/10.1016/j.apcata.2015.02.007
-
Odenbrand, C.U.I., L.A.H. Anderson, J.G.M. Brandin, and S.T. Lundin (1986) Catalytic reduction of nitrogen oxide: 2. the reduction of
$NO_2$ , Applied Catalysis, 27, 363-377. https://doi.org/10.1016/S0166-9834(00)82931-0 - Radlinski, A.P., A. Calka, B.W. Ninham, and W.A. Kaczmarek (1991) Application of surface active substances in mechanical alloying, Materials Science and Engineering: A, 134, 1346-1349. https://doi.org/10.1016/0921-5093(91)90988-Y
-
Rodella, C.B., P.A.P. Nascente, R.W.A. Franco, C.J. Magon, V.R. Mastelaro, and A.O. Florentino (2001) Surface characterization of
$V_2O_5$ /$TiO_2$ catalytic system, Physica Status Solidi A, 187, 161-169. https://doi.org/10.1002/1521-396X(200109)187:1<161::AID-PSSA161>3.0.CO;2-X - Suryanarayana, C. (2001) Mechanical alloying and milling, Progress in Materials Science, 46, 1-184. https://doi.org/10.1016/S0079-6425(99)00010-9