DOI QR코드

DOI QR Code

열전발전 장치의 연안어선 활용에 관한 연구

Application and verification analysis of the thermoelectric generation system for a coastal fishing vessel

  • 이동길 (국립수산과학원 수산공학과) ;
  • 양용수 (국립수산과학원 수산공학과) ;
  • 김병관 (국립수산과학원 수산공학과) ;
  • 김성훈 (국립수산과학원 수산공학과) ;
  • 김현영 (국립수산과학원 수산공학과)
  • LEE, Donggil (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • YANG, Yongsu (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • KIM, Pyungkwan (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • KIM, Seonghun (Fisheries Engineering Research Division, National Institute of Fisheries Science) ;
  • KIM, Hyunyoung (Fisheries Engineering Research Division, National Institute of Fisheries Science)
  • 투고 : 2017.03.07
  • 심사 : 2017.05.25
  • 발행 : 2017.05.31

초록

The renewable energy sources can be thought of one of the major measures to reduce greenhouse gas emissions in the industries. However, the utilization technology for those sources is approaching in the different matters. One of them, thermoelectric generation might be applicable to fishing industry. A various of internal combustion engines are used in a wide range of fisheries. After the ignition process, the heat passed out from the exhaust outlet. Recycling the heat could be not only an energy source but also reduction of green gas emission. Therefore, this study was designed to verify the feasibility of generation from wasted exhaust gas and analyze the performance. The designed experiment devices were connected with a data logger and an electric loader to quantify the currency and voltage. The devices were installed in a coastal fishing vessel for a gillnet fishery. During the whole fishing trips, the amount of generation was measured by engine rpm and the fishing operation procedures including vessel operations. At the maximum 1,500 rpm in the practical range, the generation amount was 113.6 W. The amount difference in relation to connection method was within 5 W: serial connection was 111.4 W and parallel connection was 115.8 W.

키워드

참고문헌

  1. Alam H and Ramakrishna S. 2013. A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials. Nano Energy 2(2), 190-212.(DOI: https://doi.org/10.1016/j.nanoen.2012.10.005)
  2. Elsheikh MH, Shnawah DA, Sabri MFM, Said SBM, Hassan MH, Bashir MBA and Mohamad M. 2014. A review on thermoelectric renewable energy: Principle parameters that affect their performance. Renew Sustain Energy Rev 30, 337-355. (DOI:https://doi.org/10.1016/j.rser.2013.10.027)
  3. Herring C. 1954. Theory of the thermoelectric power of semiconductors. Phys Rev, 96(5), 1163. (DOI:https://doi.org/10.1103/PhysRev.96.1163)
  4. Kawamoto N, Naiki K, Kawai T, Shikida T and Tomatsuri M. 2009. Development of new 1.8-liter engine for hybrid vehicles (No. 2009-01-1061). SAE Tech Pap. (DOI: 10.4271/2009-01-1061)
  5. Kim, S, Park S, Kim, S, and Rhi, SH. 2011. A thermoelectric generator using engine coolant for light-duty internal combustion engine-powered vehicles. J Electron Mater 40(5), 812-816. (DOI:10.1007/s11664-011-1580-6)
  6. Lee JJ, Kim DH, Lee KH, Lim JK and Lee ST. 2014. Fundamental Study of Energy Harvesting using Thermoelectric Module on Road Facilities. Int J High Eng 16(6), 51-57. (DOI:https://doi.org/10.7855/IJHE.2014.16.6.051)
  7. Lee, TS and Oh SS. 2010. Technology trends of thermo-electric generator system for the waste heat recovery. Auto Journal 32(5), 43-51.
  8. Leonov V and Vullers RJ. 2009. Wearable electronics self-powered by using human body heat: The state of the art and the perspective. J Renew Sustain Energy 1(6), 062701. (DOI:http://dx.doi.org/10.1063/1.3255465)
  9. Liu W, Yan X, Chen G and Ren, Z. (2012). Recent advances in thermoelectric nanocomposites. Nano Energy 1(1), 42-56. (DOI:https://doi.org/10.1016/j.nanoen.2011.10.001)
  10. Sterling D and Goldsworthy L. 2007. Energy efficient fishing: A 2006 review - Part A - Alternative fuels and efficient engines. Australian Government - Fisheries Research and Development Corporation report, 1-52.
  11. Sterling D and Klaka K. 2007. Energy efficient fishing: A 2006 review - Part B - Hull characteristics and efficiency. Australian Government - Fisheries Research and Development Corporation report, 1-27.
  12. Thrane M. 2004a. Environmental impacts from Danish fish products - Hot spots and environmental policies. Ph.D. Thesis. Department of Development and Planning, Aalborg University, Denmark, 535.
  13. Thrane M. 2004b. Energy consumption in the Danish fishery: identification of key factors. J Ind Ecol 8, 223-239.
  14. Wang Z, Leonov V, Fiorini P, and Van Hoof C. 2009. Realization of a wearable miniaturized thermoelectric generator for human body applications. Sens Actuators, A: Phys, 156(1), 95-102. (DOI:https://doi. org/10.1016/j.sna.2009.02.028)