DOI QR코드

DOI QR Code

Vibration effects on remote sensing satellite images

  • Haghshenas, Javad (Satellite Research Institute (SRI), Iranian Space Research Center)
  • 투고 : 2016.12.11
  • 심사 : 2017.01.24
  • 발행 : 2017.09.25

초록

Vibration is a source of performance degradation in all optical imaging systems. Performance of high resolution remote sensing payloads is often limited due to satellite platform vibrations. Effects of Linear and high frequency sinusoidal vibrations on the system MTF are known exactly in closed form but the low frequency vibration effects is a random process and must be considered statistically. Usually the vibration MTF budget is defined based on the mission requirements and the overall MTF limitations. For analyzing low frequency effects, designer must know all the systems specifications and parameters. With a good understanding of harmful vibration frequencies and amplitudes in the system preliminary design phase, their effects could be removed totally or partially. This procedure is cost effective and let the designer to eliminate just harmful vibrations and avoids over-designing. In this paper we have analyzed the effects of low-frequency platform vibrations on the payload's modulation transfer function. We have used a statistical analysis to find the probability of imaging with a MTF equal or greater than a pre-defined budget for different missions. The worst and average cases have been discussed and finally we have proposed "look-up figures". Using these look-up figures, designer can choose the electro-optical parameters in such a way that vibration effects be less than its pre-defined budget. Furthermore, using the results, we can propose a damping profile based on which vibration frequencies and amplitudes must be eliminated to stabilize the payload system.

키워드

참고문헌

  1. Afkhami, H., Mirzaie, M., Haghshenas, J. and Khanmirza, E. (2012), "Calculation of image quality degradation caused by mechanical vibration in satellite push-broom camera", Proceedings of the 1st SSD Conference, Tehran, Iran.
  2. Ahmad, A. (1999), Handbook of Optomechanical Engineering, 1st Edition, CRC Press, U.S.A.
  3. Bao, G. (2009), "Analysis of vibration on transfer functions of the optical imaging system", Opt. Prec. Eng., 17(2), 314-320.
  4. Haghshenas, J. (2014), "Electro-optical design for a space camera based on ModTran data analysis", SPIE 9264, Beijing, China.
  5. Haghshenas, J. (2015), "Effects of satellite platforms vibration on the image quality of a remote sensing payload: System level design and challenges", Proc. SPIE, 9626, Jena, Germany.
  6. Haghshenas, J. (2015), "Maximum allowable low-frequency platform vibrations in high resolution satellite missions: Challenges and look-up figures", Proc. SPIE, 9626, Jena, Germany.
  7. Hodar, O., Dror, I. and Kopeika, N.S. (1994), "Image resolution limits resulting from mechanical vibrations, part IV: Real-time numerical calculation of optical transfer functions and experimental verification", Opt. Eng., 31(2), 566-578.
  8. Hodar, O., Fisher, M. and Kopeika, N.S. (1992), "Image resolution limits resulting from mechanical vibrations, part III: Numerical calculation of modulation transfer function", Opt. Eng., 31(3), 581-589. https://doi.org/10.1117/12.56084
  9. Holst, G.C. (1995), Electro-Optical Imaging System Performance, Library of Congress Catalogin-in-Publication Data.
  10. Holst, G.C. (1998), CCD Arrays, Cameras, and Displays, 2nd Edition, Winter Park, 292.
  11. Raiter, S., Stern, A., Hadar, O. and Kopeika, N.S. (2003), "Image restoration from camera vibration and object motion blur in infrared staggered time-delay and integration systems", Opt. Eng., 42(11), 3253-3264. https://doi.org/10.1117/1.1612513
  12. Robbins, H., Novogrozky, Y. and Kaplan, D. (1996), "Image motion restoration from sequence of image", Opt. Eng., 35(2), 898-904.
  13. Rudoler, S.O., Hodar, M., Fisher, N.S. and Kopeika. (1991), "Image resolution limits resulting from mechanical vibrations, part II: Experiment", Opt. Eng., 30(5), 577-589. https://doi.org/10.1117/12.55843
  14. Trott, T. (1960), "The effects of motion on resolution", Photogr. Eng., 26, 819-827.
  15. Wulich, D. and Kopeika, N.S. (1987), "Image resolution limits from mechanical vibration", Opt. Eng., 26(6), 529-533.
  16. Xu, P., Hao, Q., Huang, C. and Wang, Y. (2003), "Degradation of modulation transfer function in pushbroom camera caused by mechanical vibration", Opt. Laser Technol., 35, 547-552. https://doi.org/10.1016/S0030-3992(03)00084-7
  17. Xue, B.X. Chen, G. and Ni, G. (2009), "Image quality degradation analysis induced by satellite platform harmonic vibration", SPIE, 7513, Shanghai, China.
  18. Yang, F.X. Zhang, Y., Huang, W.Hao, B. Guo (2012), "Simulation analysis of space remote sensing image quality degradation induced by satellite platform vibration", SPIE, 8557, Beijing, China.
  19. Zhong, W.H. Deng, Z.S. and Wu, X. (2009), "Computation model of image motion velocity for space optical remote cameras", Proceedings of the IEEE International Conference on Mechatronics and Automation, Changchun, China.

피인용 문헌

  1. Image-based method for the angular vibration measurement of a linear array camera vol.60, pp.4, 2017, https://doi.org/10.1364/ao.413355