한국섬유공학회지 (Textile Science and Engineering)

  • 제54권4호
  • /
  • Pages.224-229
  • /
  • 2017
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

열처리가 강연사 제직 실크 직물의 기계적 성질에 주는 영향

Effect of Heat Treatment on the Mechanical Properties of Silk Textile Woven with High Twist Yarns

  • 박보경 (경북대학교 바이오섬유소재학과) ;
  • 엄인철 (경북대학교 바이오섬유소재학과)
  • Park, Bo Kyung (Department of Bio-fibers and Materials Science, Kyungpook National University) ;
  • Um, In Chul (Department of Bio-fibers and Materials Science, Kyungpook National University)
  • 투고 : 2017.07.01
  • 심사 : 2017.08.02
  • 발행 : 2017.08.31
⟨ 이전 논문 다음 논문 ⟩

초록

Silk textile has been used for a long time owing to its soft texture and luster. However, its limited elasticity has restricted its textile application causing end users to demand silk textile with improved features such as good extensibility and elasticity. In this study, the silk textile was prepared with high twist silk yarn and subjected to heat treatments to augment its elasticity. The effect of heat treatment on the morphology and mechanical properties of silk textile was examined. As the water temperature and drying temperature increased, the shrinkage ratio of silk textile increased causing the weft silk yarn to become tangled. Further, the breaking strength of silk textile decreased and its elongation increased significantly. Most silk textiles, except the ones immersed in water and dried at $25^{\circ}C$, showed an elastic recovery of 100%. However, the results of tough repetitive extension tests (at 150% elongation condition) showed a small permanent extension of silk textile at the end of the first extension cycle.

키워드

참고문헌

  1. B. K. Park and I. C. Um, "Effects of Electric Field on the Maximum Electro-spinning Rate of Silk Fibroin Solutions", Int. J. Biol. Macromol., 2017, 95, 8-13. https://doi.org/10.1016/j.ijbiomac.2016.11.026
  2. J. Kim, C. Kim, C. Park, J. Seo, H. Kweon, S. Kang, and G. K. Lee, "Comparison of Methods for the Repair of Acute Tympanic Membrane Perforations: Silk Patch vs. Paper Patch", Wound Rep. Reg., 2010, 18, 132-138. https://doi.org/10.1111/j.1524-475X.2009.00565.x
  3. H. Y. Kweon, K. G. Lee, C.-H. Chae, C. Balazsi, S.-K. Min, J.-Y. Kim, J.-Y. Choi, and S.-G. Kim, "Development of Nano-Hydroxyapatite Graft With Silk Fibroin Scaffold as a New Bone Substitute", J. Oral Maxil. Surg., 2011, 69, 1578-1586. https://doi.org/10.1016/j.joms.2010.07.062
  4. K. H. Kim, L. Jeong, H. N. Park, S. Y. Shin, W. H. Park, S. C. Lee, T. I. Kim, Y. J. Park, Y. J. Seol, Y. M. Lee, Y. Kum, I. C. Rhyu, S. B. Han, and C. P. Chung, "Biological Efficacy of Silk Fibroin Nanofiber Membranes for Guided Bone Regeneration", J. Biotech., 2005, 120, 327-339. https://doi.org/10.1016/j.jbiotec.2005.06.033
  5. J. Y. Song, S. G. Kim, J. W. Lee, W. S. Chae, H. Kweon, Y. Y. Jo, K. G. Lee, Y. C. Lee, J. Y. Choi, and J. Y. Kim, "Accelerated Healing with the Use of a Silk Fibroin Membrane for the Guided Bone Regeneration Technique", Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod., 2011, 112, e26-e33.
  6. S. Y. Park, C. S. Ki, Y. H. Park, K. G. Lee, S. W. Kang, H. Y. Kweon, and H. J. Kim, "Functional Recovery Guided by an Electrospun Silk Fibroin Conduit after Sciatic Nerve Injury in Rats", J. Tissue Eng. Regen. Med., 2015, 9, 66-76. https://doi.org/10.1002/term.1615
  7. S. W. Lee, I. C. Um, S. G. Kim, and M. S. Cha, "Evaluation of Bone Formation and Membrane Degradation in Guided Bone Regeneration Using a 4-hexylresorcinol-incorporated Silk Fabric Membrane", Maxillofac. Plast. Reconstr. Surg., 2015, 37, 32. https://doi.org/10.1186/s40902-015-0034-0
  8. Y. S. Bae and I. C. Um, "Effects of Treatment Temperature on Mechanical Properties of Silk Textiles Made with Silk/polyurethane Core-spun Yarn", Int. J. Indust. Entomol., 2016, 33, 108-112. https://doi.org/10.7852/ijie.2016.33.2.108
  9. Y. S. Bae, C. W. Kim, D. G. Bae, and I. C. Um, "Effect of Degumming on Structure and Mechanical Properties of Silk Textile Made with Silk/polyurethane Core-spun Yarn", Int. J. Indust. Entomol., 2016, 33, 132-137. https://doi.org/10.7852/ijie.2016.33.2.132