DOI QR코드

DOI QR Code

Development of mix design method for geopolymer concrete

  • 투고 : 2017.05.01
  • 심사 : 2017.08.11
  • 발행 : 2017.08.25

초록

This study proposes a mix design method for geopolymer concrete (GPC) using low calcium fly ash and alccofine, with the focus on achieving the required compressive strength and workability at heat and ambient curing. Key factors identified and nine mixes with varied fly ash content (350, 375 and $400kg/m^3$) and different molarity (8, 12 and 16M) of NaOH solutions were prepared. The cubes prepared were cured at different temperatures ($27^{\circ}C$, $60^{\circ}C$ and $90^{\circ}C$) and tested for its compressive strength after 3, 7 and 28 days of curing. Fly ash content has been considered as the direct measure of workability and strength. The suggested mix design approach has been verified with the help of the example and targets well the requirements of fresh and hardened concrete.

키워드

참고문헌

  1. Atcin, P.C. (2000), "Cements of yesterday and today: Concrete of tomorrow", Cement Concrete Res., 30(9), 1349-1359. https://doi.org/10.1016/S0008-8846(00)00365-3
  2. Amol, A., Chore, H.S. and Dode, P.A. (2014), "Effect of curing condition on strength of geopolymer concrete", Adv. Concrete Constr., 2(1), 29-37. https://doi.org/10.12989/acc.2014.2.1.029
  3. Anuradha, R., Sreevidya, V., Venkatasubramani, R. and Rangan, B.V. (2012), "Modified guidelines for geopolymer concrete mix design using Indian standard", Asian J. Civil Eng., 13(3), 353-364.
  4. Bharat, B., Jindal, D.S., Sanjay, K.S., Deepankar, K.A. and Parveen. (2017), "Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine", Adv. Concrete Constr., 5(1), 17-29. https://doi.org/10.12989/acc.2017.5.1.17
  5. BIS 10262 (2009), Proportioning-Guideline, New Delhi, India.
  6. BIS 1199 (1959), Method of Sampling and Analysis of Concrete, New Delhi, India.
  7. BIS 2386 (1963), Methods of Test for Aggregates Concrete-Part I Particle Size and Shape, New Delhi, India.
  8. BIS 3812 (2003), Pulverized Fuel Ash-Specifications, New Delhi, India.
  9. BIS 383 (1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, New Delhi, India.
  10. BIS 456 (2000), Plain and Reinforced Concrete-Code of Practice, New Delhi, India.
  11. BIS 516 (1959), Methods of Tests for Strength of Concrete, New Delhi, India.
  12. BIS 7320 (1974), Indian Standard Specification for Concrete Slump Test Apparatus, New Delhi, India.
  13. BIS 9103 (1999), Concrete Admixtures-Specification, New Delhi, India.
  14. Davidovits, J. (1994), "High alkali cements for 21st century concretes", Struct. Eng. Mech., 144, 383-398.
  15. Duxson, P., Fernandez-Jimenez, A., Provis, J.L., Lukey, G.C., Palomo, A. and Van Deventer, J. (2007), "Geopolymer technology: The current state of the art", J. Mater. Sci., 42(9), 2917-2933. https://doi.org/10.1007/s10853-006-0637-z
  16. Ferdous, M., Kayali, O. and Khennane, A. (2013), "A detailed procedure of mix design for fly ash based geopolymer concrete", Proceedings of the 4th Asia-Pacific Conference on FRP in Structures (APFIS), Melbourne, Australia.
  17. Ferdous, W., Manalo, A., Khennane, A. and Kayali, O. (2015), "Geopolymer concrete-filled pultruded composite beams-concrete mix design and application", Cement Concrete Compos., 58, 1-13. https://doi.org/10.1016/j.cemconcomp.2014.12.012
  18. Gartner, E. (2004), "Industrially interesting approaches to "low-CO " cements", Cement Concrete Res., 34(9), 1489-1498. https://doi.org/10.1016/j.cemconres.2004.01.021
  19. Hardjito, D.R.B. (2005), Development and Properties of Low Calcium Fly Ash Based Geopolymer Concrete, GC1, Faculty of Engineering, Curtin University of Technology.
  20. Hardjito, D., Wallah, S.E., Sumajouw, D.M. and Rangan, B.V. (2004), "On the development of fly ash-based geopolymer concrete", ACI Mater. J. Am. Concrete Inst., 101(6), 467-472.
  21. Hardjito, D., Wallah, S.E., Sumajouw, D.M. and Rangan, B.V. (2005), "Fly ash-based geopolymer concrete", Austr. J. Struct. Eng., 6(1), 77-86. https://doi.org/10.1080/13287982.2005.11464946
  22. Jewell, S. and Kimball, S. (2014), USGS Mineral Commodities Summaries, 12(12), 2014.
  23. Junaid, M.T., Kayali, O., Khennane, A. and Black, J. (2015), "A mix design procedure for low calcium alkali activated fly ash-based concretes", Constr. Build. Mater., 79, 301-310. https://doi.org/10.1016/j.conbuildmat.2015.01.048
  24. Kayali, O., Haque, M. and Khatib, J.M. (2008), "Sustainability and emerging concrete materials and their relevance to the Middle East", Open Constr. Build. Technol. J., 2(1), 103-110. https://doi.org/10.2174/1874836800802010103
  25. Lloyd, N. and Rangan, B. (2010), "Geopolymer concrete with fly ash", Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, Italy.
  26. Malhotra, V. (1999), "Making concrete greener with fly ash", Concrete Int., 21(5), 61-66.
  27. McCaffrey, R. (2002), Climate Change and the Cement Industry, Global Cement and Lime Magazine (Environmental Special Issue), 15-19.
  28. McLellan, B.C., Williams, R.P., Lay, J., Van Riessen, A. and Corder, G.D. (2011), "Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement", J. Clean. Prod., 19(9), 1080-1090. https://doi.org/10.1016/j.jclepro.2011.02.010
  29. Parveen, A.S. and Singhal, D. (2013), "Mechanical properties of geopolymer concrete: A state of the art report", Proceedings of the 5th Asia And Pacific Young Researchers And Graduate Symposium, Jaipur, India.
  30. Pavithra, P., Reddy, M.S., Dinakar, P., Rao, B.H., Satpathy, B. and Mohanty, A. (2016), "A mix design procedure for geopolymer concrete with fly ash", J. Clean. Prod., 133, 117-125. https://doi.org/10.1016/j.jclepro.2016.05.041
  31. Raj, D.S., Ganesan, N. Abraham, R. and Raju, A. (2016), "Behavior of geopolymer and conventional concrete beam column joints under reverse cyclic loading", Adv. Concrete Constr., 4(3), 161-172. https://doi.org/10.12989/acc.2016.4.3.161
  32. Rangan, B. (2007), Concrete Construction Engineering Handbook, CRC Press, New York, U.S.A.
  33. Rangan, B.V., Hardjito, D., Wallah, S.E. and Sumajouw, D.M. (2005), "Studies on fly ash-based geopolymer concrete", Proceedings of the World Congress Geopolymer, Saint Quentin, France.
  34. Saha, S. and Rajasekaran, C. (2016), "Mechanical properties of recycled aggregate concrete produced with Portland pozzolana cement", Adv. Concrete Constr., 4(1), 27-35. https://doi.org/10.12989/acc.2016.4.1.027
  35. Slaty, F., Khoury, H., Rahier, H. and Wastiels, J. (2015), "Durability of alkali activated cement produced from kaolinitic clay", Appl. Clay Sci., 104, 229-237. https://doi.org/10.1016/j.clay.2014.11.037
  36. Solanki, P. and Dasha, B. (2016), "Mechanical properties of concrete containing recycled materials", Adv. Concrete Constr., 4(3), 207-220. https://doi.org/10.12989/acc.2016.4.3.207
  37. Worrell, E., Price, L., Martin, N., Hendriks, C. and Meida, L.O. (2001), "Carbon dioxide emissions from the global cement industry 1", Ann. Rev. Energy Environ., 26(1), 303-329. https://doi.org/10.1146/annurev.energy.26.1.303

피인용 문헌

  1. A study on the compressive strength and microstructure characteristic of alkali-activated metakaolin cement vol.24, pp.4, 2017, https://doi.org/10.1590/s1517-707620190004.0832
  2. Strength characteristics of granulated ground blast furnace slag-based geopolymer concrete vol.11, pp.3, 2017, https://doi.org/10.12989/acc.2021.11.3.219