Advances in concrete construction

  • 제5권4호
  • /
  • Pages.331-343
  • /
  • 2017
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance of polymer concrete incorporating waste marble and alfa fibers

  • Mansour, Rokbi (Department of Mechanical Engineering, Faculty of Technology, University of M'sila) ;
  • El Abidine, Rahmouni Z. (Department of Civil Engineering, Faculty of Technology, University of M'sila) ;
  • Brahim, Baali (Sarl Maghreb Pipe, industriel Zone)
  • 투고 : 2017.05.08
  • 심사 : 2017.06.28
  • 발행 : 2017.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study a polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with natural Alfa fibers has been studied. The results of flexural testing of unreinforced polymer concrete with different rates of charges (marble) showed that the concrete with 20% of marble is stronger and more rigid compared to other grades. Hence, a rate of 20% of marble powder is selected as the optimal value in the development of polymer concrete reinforced Alfa fibers. The fracture results of reinforced polymer concrete with 1 and 2 wt% of chopped untreated or treated Alfa fibers showed that treated Alfa (5% NaOH) fiber reinforced polymer concrete has higher fracture properties than other composites. We believe that this type of concrete provides a very promising alternative for the building industry seeking to achieve the objectives of sustainable development.

키워드

참고문헌

  1. Abdel-Fattah, H. and El-Hawary, M.M. (1999), "Flexural behavior of polymer concrete", Constr. Build. Mater., 13(5), 253-262. https://doi.org/10.1016/S0950-0618(99)00030-6
  2. Al-Oraimi, S.K. and Seibi, A.C. (1995), "Mechanical characterisation and impact behaviour of concrete reinforced with natural fibres", Compos. Struct., 32(1-4), 165-171. https://doi.org/10.1016/0263-8223(95)00043-7
  3. Ali, M., Liu, A., Sou, H. and Chouw, N. (2012), "Mechanical and dynamic properties of coconut fibre reinforced concrete", Constr. Build. Mater., 30, 814-825. https://doi.org/10.1016/j.conbuildmat.2011.12.068
  4. Almeida, N., Branco, F. and Santos, J.R. (2007), "Recycling of stone slurry in industrial activities: Application to concrete mixtures", Build. Environ., 42(2), 810-819. https://doi.org/10.1016/j.buildenv.2005.09.018
  5. Ashish, D.K., Verma, S.K., Kumar, R. and Sharma, N. (2016), "Properties of concrete incorporating sand and cement with waste marble powder", Adv. Concrete Constr., 4(2), 145-160. https://doi.org/10.12989/acc.2016.4.2.145
  6. Barbuta, M. and Harja, M. (2008), "Properties of fiber reinforced polymer concrete", Buletinul Institutului Politehnic Iasi., Sectia Constructii, Arhitectura, 54(3), 13-21.
  7. Cao, Y., Shibata, S. and Fukumoto, I. (2006), "Mechanical properties of biodegradable composites reinforced with bagasse fibre before and after alkali treatments", Compos. Part A-Appl. S., 37(3), 423-429. https://doi.org/10.1016/j.compositesa.2005.05.045
  8. Committee, R.T. (1995), "Method of making polymer concrete and mortar specimens", Proceedings of the Symposium on Properties and Test Methods for Concrete-Polymer Composites, Oostende, Belgium.
  9. Corinaldesi, V., Moriconi, G. and Naik, T.R. (2010), "Characterization of marble powder for its use in mortar and concrete", Constr. Build. Mater., 24(1), 113-117. https://doi.org/10.1016/j.conbuildmat.2009.08.013
  10. Ergun, A. (2011), "Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete", Constr. Build. Mater., 25(2), 806-812. https://doi.org/10.1016/j.conbuildmat.2010.07.002
  11. Fontana, J.J. and Bartholomew, J. (1980), Use of Concrete Polymer Materials in the Transportation Industry, Federal Highway Administration, Office of Development, Brookhaven National Lab., Upton, New York, U.S.A.
  12. Guneyisi, E., Gesoglu, M. and Ozbay, E. (2009), "Effects of marble powder and slag on the properties of self-compacting mortars", Mater. Struct., 42(6), 813-826. https://doi.org/10.1617/s11527-008-9426-2
  13. Hebhoub, H., Aoun, H., Belachia, M., Houari, H. and Ghorbel, E. (2011), "Use of waste marble aggregates in concrete", Constr. Build. Mater., 25(3), 1167-1171. https://doi.org/10.1016/j.conbuildmat.2010.09.037
  14. Huang, X. and Netravali, A. (2009), "Biodegradable green composites made using bamboo micro/nanofibrils and chemically modified soy protein resin", Compos. Sci. Technol., 69(7-8), 1009-1015. https://doi.org/10.1016/j.compscitech.2009.01.014
  15. Jarabo, R., Fuente, E., Monte, M., Savastano, H., Mutje, P. and Negro, C. (2012), "Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties", Ind. Crops Prod., 39, 89-96. https://doi.org/10.1016/j.indcrop.2012.02.017
  16. John, M.J. and Anandjiwala, R.D. (2008), "Recent developments in chemical modification and characterization of natural fiber-reinforced composites", Polym. Compos., 29(2), 187-207. https://doi.org/10.1002/pc.20461
  17. Kalia, S., Kaith, B. and Kaur, I. (2009), "Pretreatments of natural fibers and their application as reinforcing material in polymer composites-a review", Polym. Eng. Sci., 49(7), 1253-1272. https://doi.org/10.1002/pen.21328
  18. Li, Z., Wang, L. and Wang, X. (2004), "Compressive and flexural properties of hemp fiber reinforced concrete", Fibers Polym., 5(3), 187-197. https://doi.org/10.1007/BF02902998
  19. Pratap, A. (2002), "Vinyl ester and acrylic based polymer concrete for electrical applications", Prog. Cryst. Growth Charact. Mater., 45(1-2), 117-125. https://doi.org/10.1016/S0960-8974(02)00036-0
  20. Recommendation, R.D. (1985), "Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beames", Mater. Struct., 18(106), 285-290. https://doi.org/10.1007/BF02472917
  21. Reis, J.M.L. (2006), "Fracture and flexural characterization of natural fiber-reinforced polymer concrete", Constr. Build. Mater., 20(9), 673-678. https://doi.org/10.1016/j.conbuildmat.2005.02.008
  22. Reis, J.M.L. (2011), "Effect of aging on the fracture mechanics of unsaturated polyester based on recycled PET polymer concrete", Mater. Sci. Eng. A, 528(6), 3007-3009. https://doi.org/10.1016/j.msea.2010.12.073
  23. Reis, J.M.L. (2012) "Sisal fiber polymer mortar composites: Introductory fracture mechanics approach", Constr. Build. Mater., 37, 177-180. https://doi.org/10.1016/j.conbuildmat.2012.07.088
  24. Reis, J.M.L. and Carneiro, E. (2013), "Effect of piassava lees in the fracture behavior of polymer mortars", Compos. Struct., 95, 564-568. https://doi.org/10.1016/j.compstruct.2012.07.008
  25. Reis, J.M.L. and Ferreira, A. (2004), "Assessment of fracture properties of epoxy polymer concrete reinforced with short carbon and glass fibers", Constr. Build. Mater., 18(7), 523-528. https://doi.org/10.1016/j.conbuildmat.2004.04.010
  26. Reis, J.M.L. and Motta, E. (2014), "Mechanical behavior of piassava fiber reinforced castor oil polymer mortars", Compos. Struct., 111, 468-472. https://doi.org/10.1016/j.compstruct.2014.01.023
  27. Rilem, P. (1995), "Technical committee TC-113, method of test for flexural strength and deflection of polymer-modified mortar", Proceedings of the Symposium on Properties and Test Methods for Concrete-Polymer Composites, Oostende, Belgium.
  28. Rokbi, M., Osmani, H., Imad, A. and Benseddiq, N. (2011), "Effect of chemical treatment on flexure properties of natural fiber-reinforced polyester composite", Proc. Eng., 10, 2092-2097. https://doi.org/10.1016/j.proeng.2011.04.346
  29. Sarker, P.K., Haque, R. and Ramgolam, K.V. (2013), "Fracture behaviour of heat cured fly ash based geopolymer concrete", Mater. Des., 44, 580-586. https://doi.org/10.1016/j.matdes.2012.08.005
  30. Shrive, N. (1983), "Compression testing and cracking of plain concrete", Mag. Concrete Res., 35(122), 27-39. https://doi.org/10.1680/macr.1983.35.122.27
  31. Soraru, G.D. and Tassone, P. (2004) "Mechanical durability of a polymer concrete: A vickers indentation study of the strength degradation process", Constr. Build. Mater., 18(8), 561-566. https://doi.org/10.1016/j.conbuildmat.2004.04.019
  32. Sripaiboonkij, P., Sripaiboonkij, N., Phanprasit, W. and Jaakkola, M.S. (2009), "Respiratory and skin health among glass microfiber production workers: A cross-sectional study", Environ. Health, 8, 36. https://doi.org/10.1186/1476-069X-8-36
  33. TC89-FMT, R. (1991), "Fracture mechanics of concrete test methods", Mater. Struct., 23, 457-460.
  34. Varughese, K. and Chaturvedi, B. (1996), "Fly ash as fine aggregate in polyester based polymer concrete", Cement Concrete Compos., 18(2), 105-108. https://doi.org/10.1016/0958-9465(95)00006-2
  35. Zannen, S., Ghali, L.M., Halimi, T. and Hssen, M.B. (2014), "Effect of chemical extraction on physicochemical and mechanical properties of doum palm fibres", Adv. Mater. Phys. Chem., 4(10), 203-216. https://doi.org/10.4236/ampc.2014.410024

피인용 문헌

  1. Physico-chemical and mechanical characterization of Jute fabrics for civil engineering applications vol.18, pp.1, 2018, https://doi.org/10.3233/jcm-180776
  2. Eco-friendly High-Strength Concrete Engineered by Micro Crumb Rubber from Recycled Tires and Plastics for Railway Components vol.9, pp.1, 2017, https://doi.org/10.1520/acem20180058
  3. A high-strength lightweight concrete made using straw vol.72, pp.9, 2020, https://doi.org/10.1680/jmacr.19.00225
  4. Waste glass powder and its effect on the fresh and mechanical properties of concrete: A state of the art review vol.10, pp.5, 2017, https://doi.org/10.12989/acc.2020.10.5.417
  5. White Crystal Cane Sugar Analysis Using a Noninvasive Method for Detection of Tampering with Sand vol.14, pp.7, 2021, https://doi.org/10.1007/s12161-021-01995-5