참고문헌
- Saji, G., 2014, "Safety Goals for Seismic and Tsunami Risks: Lessons Learned from the Fukushima Daiichi Disaster," Nucl. Eng. Des., Vol. 280, pp. 449-463. https://doi.org/10.1016/j.nucengdes.2014.09.013
- Stevenson, J.D., 2014, "Summary of the Historical Development of Seismic Design of Nuclear Power Plants in Japan and the U.S.," Nucl. Eng. Des., Vol. 269, pp. 160-164. https://doi.org/10.1016/j.nucengdes.2013.08.023
- OECD/NEA, 2015, "Interim Report on Metallic Components Margins under High Seismic Loads," NEA/CSNI/R(2015)8
- Kasahara, N., Nakamura, I., Machida, H., Okamoto, K., and Sato, T., 2016, "Structural Analysis Approach for Risk Assessment Under BDBE," Proc. of ASME PVP 2016, PVP2016-63416.
- Ravikiran, A., Dubey, P.N., Agrawal, M.K., Reddy, G.R., Singh, R.K., and Vaze, K. K., 2015, "Experimental and Numerical Studies of Ratcheting in a Pressurized Piping System under Seismic Load," J. of Pres. Ves. & Tech., 137(3), 031011. https://doi.org/10.1115/1.4028619
- Islam, N., Fenton, M., and Hassan, T., 2015, "Long and Short Radius Elbow Experiments and Evaluation of Advanced Constitutive Models to Simulate the Responses," Proc. of ASME PVP 2015, PVP2015-45688.
- Nakamura, I. and Kasahara, N., 2015, "Excitation Tests on Elbow Pipe Specimens to Investigate Failure Behavior under Excessive Seismic Loads," Proc. of ASME PVP 2015, PVP2015-45711.
- Donavin, Gilada, R., Gustin, H., Vo., T., and Pace, R., 2016, "Technical Basis for Proposed ASME Section XI Code Cases on Beyond Design Bases Earthquake," Proc. of ASME PVP2016, PVP2016-63827.
- Kim, J.W., Song, I.H., Kweon, H.D., and Kim, J.S., 2017, "Ultimate Strength Test using Simulated Specimen under Excessive Seismic Loads," Proc. of KNS 2017 spring meet.
- Kweon, H.D., Heo, E.J., Kim, J.S., Lee, J.M., Nam, H.S., Kim, Y.J., and Kim, J.W., 2017, "Structural Evaluation Method for Protection Against Failures of Safety Class 1 Components under Large Seismic Load," Proc. of KNS 2017 spring meet.
- Kim, J.S., Lee, S.H., Kim, Y.J., Lee, J.M., Kweon, H.D., and Heo, E.J., 2017, "A Round Robin Analysis for Developing Strain-Based Structural Integrity Assessment Procedure of Nuclear Components under Beyond Design Basis Earthquake," Proc. of KNS 2017 spring meet.
- DeGrassi, G., Nie, J., and Hofmayer, C., 2008, "Seismic Analysis of Large-Scale Piping Systems for the JNES-NUPEC Ultimate Strength Piping Test Program," NUREG/CR-6983, BNL-NUREG-81548-2008.
- USNRC, 1997, International Piping Integrity Research Group (IPIRG) Program, Final Report, NUREG/ CR-6233.
- USNRC, 1997, International Piping Integrity Research Group (IPIRG-2) Program, Program, Final Report, NUREG/CR-6452.
- USNRC, 2005, The Battelle Integrity of Nuclear Piping (BINP) Program Final Report, NUREG/CR-6837.
- DeGrassi, G. and Hofmayer, C., 2005, "Seismic Analysis of Simplified Piping Systems for the NUPEC Ultimate Strength Piping Test Program," NUREG/ CR-6889.
- ASME, ASME B&PV Code Sec. III, Nuclear Components, 1998 edition.
- ASME, ASME B&PV Code Sec. II, Materials, 1998 edition.
- Gupta, S. K., Goyal, S., Bhasin, V., Vaze, K. K., Ghosh, A. K., and Kushwaha, H. S., 2009, "Ratcheting-fatigue Failure of Pressurized Elbows Made of Carbon Steel," Proc. of SMiRT 20, Vol. 20, pp.110-112.
- Vishnuvardhan, S., Raghava, G., Gandhi, P., Goyal, S., Gupta, S. K., and Bhasin, V., 2013, "Ratcheting Strain Assessment in Pressurized Stainless Steel Elbows Subjected to In-plane Bending," Proc. Eng., Vol. 55, pp. 666-670. https://doi.org/10.1016/j.proeng.2013.03.312
- Goyal, S., Gupta, S.K., Sivaprasad, S., Tarafder, S., Bhasin, V., and Vaze, K.K., 2013, "Low Cycle Fatigue and Cyclic Plasticity Behavior of Indian PHWR/AHWR Primary Piping Material," Proc. Eng.., Vol. 55, pp. 136-143. https://doi.org/10.1016/j.proeng.2013.03.232
- ASTM, 2009, "Standard Test Method for Tension Testing of Metallic Materials," ASTM E8/E8M-09.
- ASTM, 1998, Standard Practice for Strain-Controlled Fatigue Testing, ASTM E606-92 (Reapproved 1998)
- JSME, 2005, "Codes for Nuclear Power Generation Facilities - Rules on Design and Construction for Nuclear Power Plants -," JSME SNC1-2005 (in Japanese).