DOI QR코드

DOI QR Code

Shear buckling analysis of laminated plates on tensionless elastic foundations

  • Dong, Jianghui (School of Natural and Built Environments, University of South Australia) ;
  • Ma, Xing (School of Natural and Built Environments, University of South Australia) ;
  • Zhuge, Yan (School of Natural and Built Environments, University of South Australia) ;
  • Mills, Julie E. (School of Natural and Built Environments, University of South Australia)
  • 투고 : 2017.01.24
  • 심사 : 2017.05.18
  • 발행 : 2017.08.30

초록

The current study addresses the local buckling analysis of an infinite thin rectangular symmetrically laminated composite plate restrained by a tensionless Winkler foundation and subjected to uniform in-plane shear loading. An analytic method (i.e., one-dimensional mathematical method) is used to achieve the analytical solution estimate of the contact buckling coefficient. In addition, to study the effect of ply angle and foundation stiffness on the critical buckling coefficients for the laminated composite plates, the parametric studies are implemented. Moreover, the convergence for finite element (FE) mesh is analysed, and then the examples in the parametric study are validated by the FE analysis. The results show that the FE analysis has a good agreement with the analytical solutions. Finally, an example with the analytical solution and FE analysis is presented to demonstrate the availability and feasibility of the presented analytical method.

키워드

참고문헌

  1. Altunsaray, E. and Bayer, I. (2014), "Buckling of symmetrically laminated quasi-isotropic thin rectangular plates", Steel Compos. Struct., Int. J., 17(3), 305-320. https://doi.org/10.12989/scs.2014.17.3.305
  2. Arabzade, A., Moharami, H. and Ayazi, A. (2011), "Local elastic buckling coefficients of steel plates in composite steel plate shear walls", Scientia Iranica, 18(1), 9-15. https://doi.org/10.1016/j.scient.2011.03.002
  3. Ashour, A.S. (2003), "Buckling and vibration of symmetric laminated composite plates with edges elastically restrained", Steel Compos. Struct., Int. J., 3(6), 439-450. https://doi.org/10.12989/scs.2003.3.6.439
  4. Awad, Z.K., Aravinthan, T. and Zhuge, Y. (2014), "Finite element analysis of glass fibre reinforced polymer single and glue laminated sandwich beams under four point bending", Res. Civil Environ. Eng., 2(1), 24-44.
  5. Baseri, V., Jafari, G.S. and Kolahchi, R. (2016), "Analytical solution for buckling of embedded laminated plates based on higher order shear deformation plate theory", Steel Compos. Struct., Int. J., 21(4), 883-919. https://doi.org/10.12989/scs.2016.21.4.883
  6. Becheri, T., Amara, K., Bouazza, M. and Benseddiq, N. (2016). "Buckling of symmetrically laminated plates using nth-order shear deformation theory with curvature effects", Steel Compos. Struct., Int. J., 21(6), 1347-1368. https://doi.org/10.12989/scs.2016.21.6.1347
  7. Bradford, M.A., Smith, S.T. and Oehlers, D.J. (2000), "Semicompact steel plates with unilateral restraint subjected to bending, compression and shear", J. Constr. Steel Res., 56(1), 47-67. https://doi.org/10.1016/S0143-974X(99)00073-5
  8. Chen, Q. and Qiao, P. (2015), "Shear buckling of rotationallyrestrained composite laminated plates", Thin-Wall. Struct., 94, 147-154. https://doi.org/10.1016/j.tws.2015.04.006
  9. Dalaei, M. and Kerr, A.D. (1995), "Analysis of clamped rectangular orthotropic plates subjected to a uniform lateral load", Int. J. Mech. Sci., 37(5), 527-535. https://doi.org/10.1016/0020-7403(94)00073-S
  10. Darvizeh, M., Darvizeh, A. and Sharma, C. (2002), "Buckling analysis of composite plates using differential quadrature method (DQM)", Steel Compos. Struct., Int. J., 2(2), 99-112. https://doi.org/10.12989/scs.2002.2.2.099
  11. Dong, J., Zhuge, Y., Mills, J.E. and Ma, X. (2016a), "Local buckling of profiled skin sheets resting on tensionless elastic foundations under in-plane shear loading", Eur. J. Mech. A: Solids, 58, 131-139. https://doi.org/10.1016/j.euromechsol.2016.01.008
  12. Dong, J., Zhuge, Y., Mills, J.E. and Ma, X. (2016b), "Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression", Thin-Wall. Struct., 103, 81-89. https://doi.org/10.1016/j.tws.2016.02.009
  13. Jones, R.M. (1998), Mechanics of Composite Materials, CRC Press.
  14. Jones, R. and Milne, B.J. (1976), "Application of the extended Kantorovich method to the vibration of clamped rectangular plates", J. Sound Vib., 45(3), 309-316. https://doi.org/10.1016/0022-460X(76)90390-4
  15. Keage, N., Maiolo, C., Pierotti, R. and Ma, X. (2011), "Experimental study and numerical simulation on compressive buckling behavior of thin steel skins in unilateral contact with rigid constraints", Front. Archit. Civil Eng. China, 5(3), 335-343. https://doi.org/10.1007/s11709-011-0121-y
  16. Khalili, S., Abbaspour, P. and Fard, K.M. (2013), "Buckling of non-ideal simply supported laminated plate on Pasternak foundation", Appl. Math. Comput., 219(12), 6420-6430. https://doi.org/10.1016/j.amc.2012.12.056
  17. Kosteletos, S. (1992), "Shear buckling response of laminated plates", Compos. Struct., 20(3), 147-154. https://doi.org/10.1016/0263-8223(92)90021-4
  18. Leissa, A. (1983), "Buckling of composite plates", Compos. Struct., 1(1), 51-66. https://doi.org/10.1016/0263-8223(83)90016-8
  19. Li, D., Smith, S. and Ma, X. (2016), "End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations", Int. J. Mech. Sci., 105, 83-89. https://doi.org/10.1016/j.ijmecsci.2015.11.001
  20. Liu, Q., Qiao, P. and Guo, X. (2014), "Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling", Compos. Struct., 111, 540-552. https://doi.org/10.1016/j.compstruct.2014.01.036
  21. Ma, X., Butterworth, J.W. and Clifton, C. (2007), "Compressive buckling analysis of plates in unilateral contact", Int. J. Solids Struct., 44(9), 2852-2862. https://doi.org/10.1016/j.ijsolstr.2006.08.029
  22. Ma, X., Butterworth, J.W. and Clifton, G.C. (2008a), "Initial compressive buckling of clamped plates resting on tensionless elastic or rigid foundations", J. Eng. Mech., 134(6), 514-518. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:6(514)
  23. Ma, X., Butterworth, J.W. and Clifton, G.C. (2008b), "Practical analysis procedure for compressive local buckling of skin sheets in composite panels", Int. J. Adv. Steel Constr., 4(3), 230-242.
  24. Ma, X., Butterworth, J.W. and Clifton, G.C. (2008c), "Unilateral contact buckling of lightly profiled skin sheets under compressive or shearing loads", Int. J. Solids Struct., 45(3-4), 840-849. https://doi.org/10.1016/j.ijsolstr.2007.09.006
  25. Ma, X., Butterworth, J.W. and Clifton, G.C. (2011), "Shear buckling of infinite plates resting on tensionless elastic foundations", Eur. J. Mech. A: Solids, 30(6), 1024-1027. https://doi.org/10.1016/j.euromechsol.2011.06.010
  26. Muradova, A.D. and Stavroulakis, G.E. (2012), "Buckling and postbuckling analysis of rectangular plates resting on elastic foundations with the use of the spectral method", Comput. Methods Appl. Mech. Eng., 205-208, 213-220. https://doi.org/10.1016/j.cma.2011.02.013
  27. Nemeth, M.P. (1992), "Buckling behavior of long symmetrically laminated plates subjected to combined loadings", NASA TP-3195.
  28. Nemeth, M.P. (1997), "Buckling behavior of long symmetrically laminated plates subjected to shear and linearly varying axial edge loads", NASA TP-3659.
  29. Paliwal, D. and Ghosh, S.K. (2000), "Stability of orthotropic plates on a Kerr foundation", AIAA J., 38(10), 1994-1997. https://doi.org/10.2514/2.859
  30. Panahandeh-Shahraki, D., Mirdamadi, H.R. and Shahidi, A.R. (2013), "Nonlinear buckling analysis of laminated composite curved panels constrained by Winkler tensionless foundation", Eur. J. Mech. A: Solids, 39, 120-133. https://doi.org/10.1016/j.euromechsol.2012.10.010
  31. Qiao, P. and Huo, X. (2011), "Explicit local buckling analysis of rotationally-restrained orthotropic plates under uniform shear", Compos. Struct., 93(11), 2785-2794. https://doi.org/10.1016/j.compstruct.2011.05.026
  32. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells, Theory and Analysis, CRC Press.
  33. Seide, P. (1958), "Compressive buckling of a long simply supported plate on an elastic foundation", J. Aerosp. Sci., 25(6), 382-384. https://doi.org/10.2514/8.7691
  34. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (1999a), "Elastic buckling of unilaterally constrained rectangular plates in pure shear", Eng. Struct., 21(5), 443-453. https://doi.org/10.1016/S0141-0296(97)00218-6
  35. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (1999b), "Local buckling of side-plated reinforced-concrete beams. I, Theoretical study", J. Struct. Eng., 125(6), 622-634. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(622)
  36. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (1999c), "Local buckling of side-plated reinforced-concrete beams II, Experimental study", J. Struct. Eng., 125(6), 635-643. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(635)
  37. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (1999d), "Numerical convergence of simple and orthogonal polynomials for the unilateral plate buckling problem using the Rayleigh-Ritz method", Int. J. Numer. Methods Eng., 44(11), 1685-1707. https://doi.org/10.1002/(SICI)1097-0207(19990420)44:11<1685::AID-NME562>3.0.CO;2-9
  38. Timoshenko, S.P. and Gere, J.M. (1936), Theory of Elastic Stability, McGraw-Hill, New York, London.
  39. Uy, B. and Bradford, M.A. (1996), "Elastic local buckling of steel plates in composite steel-concrete members", Eng. Struct., 18(3), 193-200. https://doi.org/10.1016/0141-0296(95)00143-3
  40. Vaseghi, O., Mirdamadi, H.R. and Panahandeh-Shahraki, D. (2013), "Non-linear stability analysis of laminated composite plates on one-sided foundation by hierarchical Rayleigh-Ritz and finite elements", Int. J. Non-Linear Mech., 57, 65-74. https://doi.org/10.1016/j.ijnonlinmec.2013.06.001
  41. Weaver, P.M. (2004), "On optimization of long anisotropic flat plates subject to shear buckling loads", Proceedings of the 45th AIAA/ASME/ASCE/AHS/ACS structures, structural dynamics and materials conference, Palm Springs, CA, USA, AIAA Paper.
  42. Weaver, P.M. and Nemeth, M.P. (2007), "Bounds on flexural properties and buckling response for symmetrically laminated composite plates", J. Eng. Mech., 133(11), 1178-1191. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:11(1178)
  43. Wright, H. (1993), "Buckling of plates in contact with a rigid medium", Struct. Eng., 71(12), 209-215.