자원리싸이클링 (Resources Recycling)

  • 제26권3호
  • /
  • Pages.26-31
  • /
  • 2017
  • /
  • 2765-3439(pISSN)
  • /
  • 2765-3447(eISSN)
한국자원리싸이클링학회 (The Korean Institute of Resources Recycling)
권호 표지
DOI QR코드

DOI QR Code

3 M의 염산용액에서 팔라듐(II), 백금(IV), 이리듐(IV) 및 로듐(III)의 분리를 위한 용매추출

Solvent Extraction for the Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) from 3 M Hydrochloric Acid Solution

  • 응우엔 티홍 (목포대학교 공과대학 신소재공학과) ;
  • 이만승 (목포대학교 공과대학 신소재공학과)
  • Nguyen, Thi Hong (Department of Advanced Material Science and Engineering, Institute of Rare Metal, Mokpo National University) ;
  • Lee, Man Seung (Department of Advanced Material Science and Engineering, Institute of Rare Metal, Mokpo National University)
  • 투고 : 2017.01.31
  • 심사 : 2017.02.28
  • 발행 : 2017.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

LIX 63 은 6 M의 염산용액에서 백금(IV), 이리듐(IV) 및 로듐(III)에 비해 팔라듐(II)에 대한 선택성이 크다. 또한 염산용액의 농도는 이리듐과 LIX 63간에 일어나는 산화-환원반응에 큰 영향을 미친다. 따라서 상기 4개의 백금족 금속을 함유한 3 M의 염산용액에서 LIX 63에 의한 분리성을 검토하였다. 3 M의 염산용액에서 LIX 63은 오직 팔라듐만을 추출했으며, 6 M의 염산용액에 비해 추출율이 높았다. TBP를 사용하면 팔라듐 추출여액으로부터 백금만을 추출하는 것이 가능하였다. 백금 추출후 $NaClO_3$로 추출여액에 함유된 이리듐을 산화시킨 다음 Aliquat 336를 접촉시키면 이리듐만이 추출되었다. 각각의 용매추출단계에 대해 최적의 탈거조건을 구했다. 본 논문의 공정으로 4개의 백금족 금속을 3 M의 염산용액에서 분리하는 것이 가능하였다.

LIX 63 showed a selectivity for the extraction of Pd(II) over other PGMs, such as Pt(IV), Ir(IV) and Rh(III) from 6 M HCl solution. Moreover, HCl solution has significant effect on the oxidation-reduction reaction between Ir(IV) and LIX 63. Therefore, the applicability of employing LIX 63 for the separation of the 4 PGMs was investigated from 3 M HCl solution. From 3 M HCl solution, only Pd(II) was selectively extracted by LIX 63 and its extraction percentage was higher than from 6 M HCl solution. Extraction of the Pd(II) free raffinate with TBP led to the selective extraction of Pt(IV). After oxidation of Ir(III) with $NaClO_3$ to Ir(IV), extraction of the Pt(IV) free raffinate with Aliquat 336 selectively extracted Ir(IV). For each extraction step, optimum stripping conditions were obtained. By this process, it was possible to separate the 4 PGMs by solvent extraction from 3 M HCl solution.

키워드

참고문헌

  1. Gupta, B., Singh, I. and Mahandra, H., 2014 : Extraction and separation studies on Pt(IV), Ir(III), and Rh(III) using sulphur containing extractant. Separation and Purification Technology, 132, pp. 102-109. https://doi.org/10.1016/j.seppur.2014.04.045
  2. Gupta, B. and Singh, I., 2013 : Extraction and separation of platinum, palladium and rhodium using Cyanex 923 and their recovery from real samples. Hydrometallury, 134-135, pp. 11-18. https://doi.org/10.1016/j.hydromet.2013.01.001
  3. Jha, M. K., Gupta, D., Lee, J. C., Kumar, V., and Jeong, J., 2014 : Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142, pp. 60-69. https://doi.org/10.1016/j.hydromet.2013.11.009
  4. Reddy, B. R., Raju, B., Lee, J. Y., and Park, H. K., 2010 : Process for the separation and recovery of palladium and platinum from spent automobile catalyst leach liquor using LIX 84I and Alamine 336. Journal Hazardous Materials, 180, pp. 253-258. https://doi.org/10.1016/j.jhazmat.2010.04.022
  5. Wei, W., Cho, C. W., Kim, S., Song, M. H., Bediako, J. K., and Yun, Y. S., 2016 : Selective recovery of Au(III), Pt(IV), and Pd(II) from aqueous solutions by liquid-liquid extraction using ionic liquid Aliquat 336. Journal of Molecular Liquid, 216, pp. 18-24. https://doi.org/10.1016/j.molliq.2016.01.016
  6. Nguyen, T. H. and Lee, M. S., 2016 : Separation of molybdenum and tungsten from sulfuric acid solution by solvent extraction with Alamine 336, J. of Korean Inst. of resources recyclying 25, pp. 16-23. https://doi.org/10.7844/kirr.2016.25.1.16
  7. Rovira, M., Cortina, J. L., Arnaldos, J., and Sastre, A. M., 1998 : Recovery and separation of platinum group metals using impregnated resins containing Alamine 336. Solvent Extraction and Ion Exchange, 16, pp. 1279-1302. https://doi.org/10.1080/07360299808934580
  8. Schreier, G. and Edtmaier, C., 2003 : Separation of Ir, Pd and Rh from secondary Pt scrap by precipitation and calcination. Hydrometallurgy, 68, pp. 69-75. https://doi.org/10.1016/S0304-386X(02)00194-9
  9. Pan, L. and Zhang, Z., 2009 : Solvent extraction and separation of palladium(II) and platinum(IV) from hydrochloric acid medium with dibutyl sulfoxide. Minerals Engineering, 22, pp. 1271-1276. https://doi.org/10.1016/j.mineng.2009.07.006
  10. Bandekar, S. V. and Dhadke, P. M., 1998 : Solvent extraction separation of platinum (IV) and palladium (II) by 2 ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A). Sep. Purif. Technol. 13, pp. 129-135. https://doi.org/10.1016/S1383-5866(97)00068-3
  11. Swain, B., Jeong, J., Kim, S. K., and Lee, J. C., 2010: Separation of platinum and palladium from chloride solution by solvent extraction using Alamine 300. Hydrometallurgy, 104, pp. 1-7. https://doi.org/10.1016/j.hydromet.2010.03.013
  12. Paiva, A. P., Carvalho, G. I., Costa, M. C., Rosa da Rosta, A. M., and Nogueira, C., 2014 : Recovery of platinum and palladium from chloride solutions by a thiodiglycolamide derivative. Solvent Extraction and Ion Exchange, 32, pp. 78-94. https://doi.org/10.1080/07366299.2013.810969
  13. Rydberg, J., Cox, M., Musikas, C., and Choppin, G. R., 2004 : Solvent Extraction Principles and Practice (Marcel Dekker, New York).
  14. Foulon, C., Pareau, D., and Durand, G., 1999 : Thermodynamic and kinetic studies of palladium (II) extraction by extractant mixtures containing LIX 63: part I. Thermodynamic study. Hydrometallurgy, 51, pp. 139-153. https://doi.org/10.1016/S0304-386X(98)00053-X
  15. Nguyen, T. H., Sonu, C. H., and Lee, M. S., 2015 : Separation of platinum(IV) and palladium(II) from concentrated hydrochloric acid solutions by mixtures of amines with neutral extractants. Journal of Industrial and Engineering Chemistry, 32, pp. 238-245. https://doi.org/10.1016/j.jiec.2015.08.022
  16. Nguyen, T. H., Sonu, C. H., and Lee, M. S., 2016 : Separation of Ir(IV) and Rh(III) from strong hydrochloric acid solutions by solvent extraction. Journal of Industrial and Engineering Chemistry, 36, pp. 245-250. https://doi.org/10.1016/j.jiec.2016.02.006
  17. Nguyen, T. H., Sonu, C. H., and Lee, M. S., 2016 : Separation of Pt(IV), Pd(II), Rh(III) and Ir(IV) from concentrated hydrochloric acid solutions by solvent extraction. Hydrometallurgy, 164, pp. 71-77. https://doi.org/10.1016/j.hydromet.2016.05.014
  18. Nguyen, T. H. and Lee, M. S., 2016 : Effect of HCl concentration on the oxidation of LIX 63 and the subsequent separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) by solvent extraction, Korean. J. Met. Mater. 54, pp. 768-774. https://doi.org/10.3365/KJMM.2016.54.10.768
  19. Charlesworth, P., 1981 : Separating the platinum group metals by liquid-liquid extraction. Platinum Metals Review, 25, pp. 106-112.
  20. Michael, N. T., 2012 : Computer Simulation of a Chromatographic Column Used in the Separation of Platinum Group Metal Chlorinated Complexes. OpenUCT. (Thesis sci.: http://hdl.handle.net/11427/11810).