Abstract
Electric arc furnace steelmaking dust has various physicochemical properties as volatile components generated in the melting process of steel scraps in an electric arc furnace, which is captured in oxide form as fine powder by reacting with oxygen in the air. In order to efficiently recycle these electric arc furnace dust, a kinetic basic experiment and a pilot production test were carried out in parallel. As a result, it was found that the electric arc furnace dust contain a large amount of Cl and alkali components, thus it was expected that the compounds have a great adverse effect on the actual operation for the recycling. It was confirmed that the volatilization behavior was progressing actively at $1100^{\circ}C$ and the electric arc furnace dust was melted at $1250^{\circ}C$. These results are the same as a result of pilot test for the formation behavior of zinc oxide and reduced iron. These results should be useful as basic data for designing the recycling plant of the electric arc furnace dust and establishing the operating conditions.
전기로 제강분진은 고철을 전기로에서 용해하는 과정에서 발생하는 휘발성분들이 공기 중의 산소와 반응하여 산화물형태로 포집된 미세분말로써 다양한 특성을 가지고 있다. 이러한 전기로 제강분진의 효율적인 자원화를 위해서 반응속도론적 기초실험과 Pilot 규모의 생산실험을 병행하여 실시하였다. 그 결과 전기로 제강분진은 다양한 구성성분과 화합물로 구성되어 있었으며 공통적으로 Cl과 알카리 성분이 다량으로 존재함에 따라 자원화를 위한 실제 조업에 큰 악영향을 미치는 화합물의 형성이 예상된다. 휘발거동은 $1100^{\circ}C$ 영역에서 활발히 진행되고 $1250^{\circ}C$ 영역에서는 용융현상이 나타남을 확인할 수 있었다. 이러한 결과는 Pilot규모의 실증테스트의 결과로 얻은 조산화아연과 환원철의 형성거동에서도 동일한 결과를 얻었다. 이러한 결과는 전기로 제강분진의 자원화 플랜트의 설계 및 조업조건 설정에 유용한 기초자료로 활용이 기대된다.