참고문헌
- Korea Hydro & Nuclear Power, Probabilistic Safety Assessment of Uljin No. 5 and No. 6, Korea Hydro & Nuclear Power, Seoul, Korea, 2002.
- F. Touboul, P. Sollogoub, N. Blay, Seismic behaviour of piping systems with and without detect: experimental and numerical evaluations, Nucl. Eng. Des 192 (1999) 243-260. https://doi.org/10.1016/S0029-5493(99)00111-9
- T. Zhang, F.W. Brust, D.J. Shim, G. Wikowski, J. Nie, C. Hofmayer, Analysis of JNES Seismic Tests on Degraded Piping, July 2010. NUREG/CR-7015.
- T. Otoyo, A. Otani, S. Fukushima, M. Jimbo, T. Yamamoto, T. Sakakida, S. Onishi, Development of an Evaluation Method for Seismic Isolation System of Nuclear Power Facilities (Part 4) Failure Behavior of Crossover Piping for Seismic Isolation System, Proceedings of the ASME 2014 Pressure Vessels & Piping Conference PVP2014, Anaheim (CA), 2014.
- Y. Park, G. DeGrassi, C. Hofmayer, P. Bezler, Analysis of nuclear piping system seismic tests with conventional and energy absorbing supports, 14th International Conference on Structural Mechanics in Reactor Technology (SMiRT 14), Lyon, France, 2008.
- K. Mizuno, H. Shimizu, M. Jimbo, N. Oritani, S. Onishi, Development of an Evaluation Method for Seismic Isolation Systems of Nuclear Power Facilities (Part 5) Fatigue Test of The Crossover Piping, Proceedings of the ASME 2014 Pressure Vessels & Piping Conference PVP2014, Anaheim, (CA), 2014.
- L. Yun, Uniaxial True Stress-Strain after Necking, AMP J. Technol 5 (1996) 37-48.
- J. Gersak, Study of the yield point of the thread, Int. J. Cloth. Sci. Tech 10 (1989) 244-251.
- H. Banon, H.M. Irvine, J.M. Biggs, Seismic damage in reinforced concrete frames, J. Struct. Div 107 (1981) 1713-1729.
- C.A. Castiglioni, R. Pucinotti, Failure criteria and cumulative damage models for steel components under cyclic loading, J. Construct. Steel Res. 65 (2009) 751-765. https://doi.org/10.1016/j.jcsr.2008.12.007
피인용 문헌
- 일반배관용 스테인리스강관에 대한 프레스식 관이음쇠의 내진성능에 관한 연구 vol.31, pp.4, 2017, https://doi.org/10.7731/kifse.2017.31.4.065
- Strain and deformation angle for a steel pipe elbow using image measurement system under in-plane cyclic loading vol.50, pp.1, 2017, https://doi.org/10.1016/j.net.2017.11.001
- Failure Strain Measurement of the Piping System of a Nuclear Power Plant Using Image Signals vol.470, pp.None, 2019, https://doi.org/10.1088/1757-899x/470/1/012011
- Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain vol.51, pp.2, 2017, https://doi.org/10.1016/j.net.2018.10.006
- 이미지 신호를 이용한 원자력발전소 강재배관 Tee의 저주기 피로 거동 vol.23, pp.6, 2019, https://doi.org/10.11112/jksmi.2019.23.6.77
- Effect of Plastic Hardening Models on Fatigue Life Simulation of Pipeline Elbows Under Operating Pressure and Cyclic Bending vol.141, pp.6, 2017, https://doi.org/10.1115/1.4044340
- Evaluation Model of Seismic Response Behavior and Performance of Nuclear Plant Piping Systems vol.11, pp.1, 2017, https://doi.org/10.11004/kosacs.2020.11.1.054
- Low Cycle Fatigue Behavior of Elbows with Local Wall Thinning vol.10, pp.2, 2017, https://doi.org/10.3390/met10020260
- Efficient Seismic Fragility Analysis for Large-Scale Piping System Utilizing Bayesian Approach vol.10, pp.4, 2017, https://doi.org/10.3390/app10041515
- 모멘트-변형각의 관계를 이용한 SCH80 3인치 강재배관엘보의 한계상태 평가 vol.24, pp.3, 2020, https://doi.org/10.11112/jksmi.2020.24.3.122
- Quantitative Limit State Assessment of a 3-Inch Carbon Steel Pipe Tee in a Nuclear Power Plant Using a Damage Index vol.13, pp.23, 2017, https://doi.org/10.3390/en13236395
- 주기적 하중을 받는 SCH 40 3-Inch 탄소강관엘보의 소산에너지 기반의 손상지수 평가 vol.25, pp.1, 2021, https://doi.org/10.11112/jksmi.2021.25.1.112
- Hybrid Simulation of Structure-Pipe-Structure Interaction within a Gas Processing Plant vol.12, pp.2, 2017, https://doi.org/10.1061/(asce)ps.1949-1204.0000526
- Seismic Performance of Piping Systems of Isolated Nuclear Power Plants Determined by Numerical Considerations vol.14, pp.13, 2017, https://doi.org/10.3390/en14134028
- Mitigation of seismic responses of actual nuclear piping by a newly developed tuned mass damper device vol.53, pp.8, 2017, https://doi.org/10.1016/j.net.2021.02.009