References
- C. Chagnot, G. De Dinechin, G. Canneau, Cutting performances with new industrial continuous wave ND: YAG high power lasers: for dismantling of former nuclear workshops, the performances of recently introduced high power continuous wave ND: YAG lasers are assessed, Nucl. Eng. Des. 240 (2010) 2604-2613. https://doi.org/10.1016/j.nucengdes.2010.06.041
- G. Verhaeghe, P. Hilton, The Effect of Spot Size and Laser Beam Quality on Welding Performance When Using High-power Continuous Wave Solid-state Lasers, ICALEO, 2005.
- B.S. Yilbas, Laser cutting of thick sheet metals: Effects of cutting parameters on kerf size variations, J. Mater. Process. Technol. 201 (2008) 285-290. https://doi.org/10.1016/j.jmatprotec.2007.11.265
- L. Quintino, A. Costa, R. Miranda, D. Yapp, V. Kumar, C.J. Kong, Welding with high power fiber lasers-a preliminary study, Mater. Des. 28 (2007) 1231-1237. https://doi.org/10.1016/j.matdes.2006.01.009
- A. Mahrle, E. Beyer, Theoretical aspects of fibre laser cutting, J. Phys. D. Appl. Phys. 42 (2009) 175507. https://doi.org/10.1088/0022-3727/42/17/175507
- P.A. Hilton, A. Khan, R. Buckingham, Advances in Laser Cutting as a Decommissioning and Dismantling Tool Laser Cutting of Plate Material, TWI internal report. (2015) 1-6.
-
M. Hashemzadeh, W. Suder, S. Williams, J. Powell, A.F.H. Kaplan, K.T. Voisey, The application of specific point energy analysis to laser cutting with 1
${\mu}m$ laser radiation, 8th International Conference on Photonic Technologies, LANE, 2014, Physics Procedia 56 (2014) 909-918. https://doi.org/10.1016/j.phpro.2014.08.110 - E. Assuncao, S. Williams, D. Yapp, Interaction time and beam diameter effects on the conduction mode limit, Opt. Lasers Eng. 50 (2012) 823-828. https://doi.org/10.1016/j.optlaseng.2012.02.001
-
H.A. Eltawahni, M. Hagino, K.Y. Benyounis, T. Inoue, A.G. Olabi, Effect of
$CO_2$ laser cutting process parameters on edge quality and operating cost of AISI316L, Opt. Laser Technol. 44 (2012) 1068-1082. https://doi.org/10.1016/j.optlastec.2011.10.008 - J. Powell, S.O. Al-Mashikhi, A.F.H. Kaplan, K.T. Voisey, Fibre laser cutting of thin section mild steel: an explanation of the 'striation free' effect, Opt. Lasers Eng. 49 (2011) 1069-1075. https://doi.org/10.1016/j.optlaseng.2011.03.011
- W.P. Juptner, LIA handbook of laser materials processing, Opt. Lasers Eng. 38 (2002) 608-610. https://doi.org/10.1016/S0143-8166(01)00176-2
-
P.A. Molian, Dual-beam
$CO_2$ laser cutting of thick metallic materials, J. Mater. Sci. 28 (1933) 1738-1748. - R. Pfeifer, D. Herzog, M. Hustedt, S. Barcikowski, Pulsed Nd :YAG laser cutting of NiTi shape memory alloys-influence of process parameters, J. Mater. Process. Technol. 210 (2010) 1918-1925. https://doi.org/10.1016/j.jmatprotec.2010.07.004
Cited by
- Applications of High Power Solid State Lasers in Nuclear Power Programme vol.88, pp.3, 2017, https://doi.org/10.1007/s40010-018-0514-6
- Development of a laser chipping technique combined with water jet for retrieval of fuel debris at Fukushima Daiichi Nuclear Power Station vol.56, pp.12, 2019, https://doi.org/10.1080/00223131.2019.1647890
- Generation of particles and fragments by quasicontinuous wave fiber laser irradiation of stainless steel, alumina, and concrete materials vol.33, pp.1, 2017, https://doi.org/10.2351/7.0000190
- Effect of focal position on cut surface quality in laser cutting of 50-mm thick stainless steel vol.35, pp.14, 2017, https://doi.org/10.1142/s021797922140018x