DOI QR코드

DOI QR Code

헤어드라이기의 팬 형상에 따른 열변형에 관한 연구

A Study on Thermal Deformation due to Fan Shape of Hair Dryer

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 투고 : 2017.03.14
  • 심사 : 2017.04.08
  • 발행 : 2017.06.30

초록

This study investigates thermal deformation due to fan shape of a hair dryer. In this study, thermal analysis showed that the shape of an electric fan results in lower temperature than that of a sieve frame. Among the shapes of electric fans, the temperature change decreases as the number of wings decreases. As a result of thermal deformation, model 4 (sieve frame shape) showed increased change of deformation compared to models 1, 2, and 3 (with electric fan shapes). Thus, the model 1 dryer with the sieve frame shape is shown to have the least durability among models 1, 2, 3, and 4. It is thought that the analysis results of this study can be applied to durability improvement and safer design of hair dryers.

키워드

참고문헌

  1. Cho, Y. T., Lee C. H., "Performance Evaluation of Heat Radiant for 50W LED by the CNT Thermal Interface Material", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 23-29, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.023
  2. Jung, J. H., Kim, S. C., Kim, H. C., Jung, D. H., Song, S. H., Lee, S. Y., Song, H. G., "A Study on Thermal-Flow Characteristics Analysis of Canned Type Electric Water Pump," KSAE conference, 2010.
  3. Han, M. S., Cho, J. U., "A Study on the Shape Design of a Radiator Panel for Effective Heat Release", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 25-30, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.025
  4. Ryu, M. R., Kim, Y. H., Byon, S. M., Park, H. S., "A Study on Thermal Analysis of Motorcycle Brake Disk", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 34-40, 2009.
  5. Lee, J. H., Han, M. S., Cho, J. U., "A Durability Study on Heat Transfer by the Configuration of Mortar", Proceedings of the KSMPE Conference, pp. 139-139, 2015.
  6. Lee, J. J., Kim, H. K., Hyun, B. S., "The Correlation of Satellite Thermal Mathematical Model using Results of Thermal Vacuum Test on Structure-Thermal Model," J. of Korean Society of Aeronautical and Space Sciences, Vol. 37, No. 9, pp. 917, 2009.
  7. Han, M. S., Cho, J. U., "Thermal Stress Analysis on Exhaust System of Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 1, pp. 42-48, 2010.
  8. Jang, H., Suh, J. S., Yi, C. S., "A Study on the radiant Heat Characteristic According to Type and Array of LED Lighting Heatsink," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 3, pp. 54-60, 2013.
  9. Cho, Y. T., "Heat Sink of LED Lights Using Engineering Plastics," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 4, pp. 61-68, 2013.
  10. Han, M. S., Cho, J. U., "Thermal Analysis According to Material of Manifold". Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 33-37, 2009.
  11. Chang, M. S., Park, J. H., Kim, S. T., Kim, I. G., Cho, S. J., "A Study on the Thermal Characteristics of Dry Vacuum Pump with Vertical Screws", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 67-74, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.067
  12. Han, M. S., Cho, J. U., "A Study on the Analysis of Thermal Durability due to the Configuration of Mortar", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 69-76, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.069