DOI QR코드

DOI QR Code

A Study on Accelerated Life Test of Hypoid Gear Rotary Reducer

하이포이드 회전감속기의 가속 수명시험 방법에 관한 연구

  • Yoon, Sang-hwan (Changwon National University) ;
  • Beak, Kwon-in (School of Mechanical & Aerospace, ReCAPT, Gyeongsang National University) ;
  • Kim, Heonkeong (School of Mechanical & Aerospace, ReCAPT, Gyeongsang National University) ;
  • Lyu, Sung-ki (School of Mechanical & Aerospace, ReCAPT, Gyeongsang National University)
  • 윤상환 (창원대학교 산학협력단) ;
  • 백권인 (경상대학교 대학원 기계항공공학부, 항공연) ;
  • 김현경 (경상대학교 대학원 기계항공공학부, 항공연) ;
  • 류성기 (경상대학교 대학원 기계항공공학부, 항공연)
  • Received : 2017.03.28
  • Accepted : 2017.05.09
  • Published : 2017.06.30

Abstract

In order to process more complicated and higher-precision parts, generally, an additional axis for a machine tool is needed which was an approach to minimize the cost of tool modification. A table with a rotary reducer that can rotate through the axis of the gear system was employed to a machine tool to achieve the purpose of adding an extra motion axis. In general, the motion of the rotary reducer is driven by a worm/wheel or helical gear system, which is different from the hypoid helical gear structure that used in this research. Reliability of guarantee of high accurancy throughout the whole life cycle is on of the critical factors to evaluate a rotary reducer in this field. In this paper, in order to evaluate life-time of rotary reducer, a low-cost accelerated life test was developed to satisfy the demands of clients.

Keywords

References

  1. Seo, S. G., Kim, H. G., "Reliability Engineering", Kyobomungo, pp. 105-210, 2010.
  2. Hong, J. P., Gong, B. C., Choi, S. D., Choi, H. J., Lee, D. S., "Study on Structure Design of High-Stiffness for 5 Axis Machining Center", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 10, No. 5, pp. 7-12, 2011.
  3. Kim, S. H., Kim, B. H., Choi, W. G., "A Study on the Measurement Method and Uncertainty Factors for Precision Inspection to Feed Unit of High Precision Machine Tool", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 55-61, 2012.
  4. Lee, H. Y., Choi, H. J., Son, J. H., Lee, D. S., "Analysis of 3D Volumetric Error for Machine Tool using Ball Bar", Journal of the Korean Society of Manufacturing Technology Engineers., Vol. 10, No. 5, pp. 1-6, 2011.
  5. Son, D. S., Kim, S. H., Park, I. H., "A Study on the Thermal Effects Measurement and Uncertainty Estimation for High Precision Machine Tools", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 12, No. 2, pp. 106-112, 2013.
  6. Cho, S. J., Park, Y. J., Han, J. W., Lee, G. H., "Fatigue Life Prediction of the Carrier of Slewing Reducer for Tower Crane", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. Vol. 14, No. 3, pp. 131-140, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.131
  7. Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S., Lyu, S. K., "Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. Vol. 14, No. 6, pp. 98-103, 2015.
  8. Lee, W. K., Park, S. M., "A Study on the Embodiment of a Transfer Case with High-Speed Reduction of the Planetary Gear Type Applied to Big Industrial Vehicles ", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. Vol. 14, No. 6, pp. 14-20, 2015.
  9. Park, J. W., "Study on Accelerated life of Swing Reduction Gear Box for Hybrid Excavator", ." Transactions of the Korean Society of Mechanical Engineers, Vol. 37, No. 11, pp. 1407-1413, 2013. https://doi.org/10.3795/KSME-A.2013.37.11.1407
  10. Thoe, B., Aspinwall, K. and Wise, H., "Review on Ultrasonic Machining," International Journal of Machine Tools and Manufacture, Vol. 38, No. 4, pp. 239-255, 1998. https://doi.org/10.1016/S0890-6955(97)00036-9
  11. Kim, N. K., Bae, K. Y., Kim, N. H., Jang, J. H., "Development of Jig Type Chuck for Roundness improvement in a Machining of High Stage Speed Gear", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 15, No. 1, pp. 20-25, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.020
  12. Kim, H. J., Kim, Y. J., Kim, H. S., "Effect of Changes in Metal Characteristics of Hot-Forged Alloy Steel on Mechanical Properties of an Automotive Automatic Transmission Gear", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 15, No. 3, pp. 135-146. 2016. https://doi.org/10.14775/ksmpe.2016.15.3.135
  13. Kim, H. J., "Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer", Journal of the Korean Society of Manufacturing Technology Engineers., Vol. 14, No. 6, pp. 63-68, 2015.