DOI QR코드

DOI QR Code

Numerical analysis of reaction forces in blast resistant gates

  • Al-Rifaie, Hasan (Poznan University of Technology, Institute of Structural Engineering) ;
  • Sumelka, Wojciech (Poznan University of Technology, Institute of Structural Engineering)
  • 투고 : 2017.02.23
  • 심사 : 2017.04.19
  • 발행 : 2017.08.10

초록

Blast resistant gates are required to be lightweight and able to mitigate extreme loading effect. This may be achieved through innovative design of a gate and its supporting frame. The first is well covered in literature while the latter is often overlooked. The design of supporting frame depends mainly on the boundary conditions and corresponding reaction forces. The later states the novelty and the aim of this paper, namely, the analysis of reaction forces in supporting structure of rectangular steel gates subjected to "far-field explosions". Flat steel plate was used as simplified gate structure, since the focus was on reaction forces rather than behaviour of gate itself. The analyses include both static and dynamic cases using analytical and numerical methods to emphasize the difference between both approaches, and provide some practical hints for engineers. The comprehensive study of reaction forces presented here, cover four different boundary conditions and three length to width ratios. Moreover, the effect of explosive charge and stand-off distance on reaction forces was also covered. The analyses presented can be used for a future design of a possible "blast absorbing supporting frame" which will increase the absorbing properties of the gate. This in return, may lead to lighter and more operational blast resistant gates.

키워드

참고문헌

  1. Amadioa, C. and Bedon, C. (2014), "FE assessment of dissipative devices for the blast mitigation of glazing façades supported by prestressed cables", Struct. Eng. Mech., 51(1), 141-162. https://doi.org/10.12989/sem.2014.51.1.141
  2. Anderson, M. and Dover, D. (2003). "Lightweight, blast-resistant doors for retrofit protection against the terrorist threat", 2nd International Conference on Innovation in Architecture, Engineering and Construction (AEC), Loughborough University, UK.
  3. Aune, V., Valsamos, G., Casadei, F., Larcher, M., Langseth, M. and Borvik, T. (2017), "Numerical study on the structural response of blast-loaded thin aluminium and steel plates", Int. J. Impact Eng., 99, 131-144. https://doi.org/10.1016/j.ijimpeng.2016.08.010
  4. Bonorchis, D. and Nurick, G. (2007), "The effect of welded boundaries on the response of rectangular hot-rolled mild steel plates subjected to localised blast loading", Int. J. Impact Eng., 34(11), 1729-1738. https://doi.org/10.1016/j.ijimpeng.2006.11.002
  5. Borenstein, E. and Benaroya, H. (2013), "Loading and structural response models of circular plates subjected to near field explosions", J. Sound Vib., 332(7), 1725-1753. https://doi.org/10.1016/j.jsv.2012.11.020
  6. Borvik, T., Hopperstad, O., Berstad, T. and Langseth, M. (2001), "A computational model of viscoplasticity and ductile damage for impact and penetration", Eur. J. Mech. A/Solid., 20(5), 685-712. https://doi.org/10.1016/S0997-7538(01)01157-3
  7. Chakraverty, S. (2008), Vibration of plates, CRC press, USA.
  8. Chen, W. and Hao, H. (2012), "Numerical study of a new multiarch double-layered blast-resistance door panel", Int. J. Impact Eng., 43, 16-28. https://doi.org/10.1016/j.ijimpeng.2011.11.010
  9. Chen, W. and Hao, H. (2014), "Experimental investigations and numerical simulations of multi-arch double-layered panels under uniform impulsive loadings", Int. J. Impact Eng., 63, 140-157. https://doi.org/10.1016/j.ijimpeng.2013.08.012
  10. Curry, R. and Langdon, G. (2016), "Transient response of steel plates subjected to close proximity explosive detonations in air", Int. J. Impact Eng., 102, 102-116.
  11. Dassault Systemes (2013), ABAQUS documentation collection.
  12. Fang, Q., Chen, L. and Du, M. (2008), "Theoretical and numerical investigations in effects of end-supported springs and dampers on increasing resistance of blast doors", Eng. Mech., 3, 035.
  13. Feldgun, V., Yankelevsky, D. and Karinski, Y. (2016), "A nonlinear SDOF model for blast response simulation of elastic thin rectangular plates", Int. J. Impact Eng., 88, 172-188. https://doi.org/10.1016/j.ijimpeng.2015.09.001
  14. Gong, S., Lu, Y., Tu, Z. and Jin, W. (2009), "Validation study on numerical simulation of RC response to close-in blast with a fully coupled model", Struct. Eng. Mech., 32(2), 283-300. https://doi.org/10.12989/sem.2009.32.2.283
  15. Hyde, D. (1991), "Conventional weapons program (ConWep) US army waterways experimental station", Vicksburg, MS, USA.
  16. Jacob, N., Nurick, G. and Langdon, G. (2007), "The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads", Eng. Struct., 29(10), 2723-2736. https://doi.org/10.1016/j.engstruct.2007.01.021
  17. Kambouchev, N., Noels, L. and Radovitzky, R. (2006), "Nonlinear compressibility effects in fluid-structure interaction and their implications on the air-blast loading of structures", J. Appl. Phys., 100(6), 063519. https://doi.org/10.1063/1.2349483
  18. Kambouchev, N., Radovitzky, R. and Noels, L. (2007), "Fluid-structure interaction effects in the dynamic response of freestanding plates to uniform shock loading", J. Appl. Mech., 74(5), 1042-1045. https://doi.org/10.1115/1.2712230
  19. Kingery, C. and Bulmash, G. (1984), "Technical report ARBRLTR-02555: air blast parameters from TNT spherical air burst and hemispherical burst", AD-B082, 713.
  20. Lee, K., Kim, T. and Kim, J. (2009), "Local response of W-shaped steel columns under blast loading", Struct. Eng. Mech., 31(1), 25-38. https://doi.org/10.12989/sem.2009.31.1.025
  21. Lim, C., Yao, W. and Cui, S. (2008), "Benchmark symplectic solutions for bending of corner-supported rectangular thin plates", IES J. Part A: Civil Struct. Eng., 1(2), 106-115. https://doi.org/10.1080/19373260701646407
  22. Lim, C.W., Cui, S. and Yao, W. (2007), "On new symplectic elasticity approach for exact bending solutions of rectangular thin plates with two opposite sides simply supported", Int. J. Solid. Struct., 44(16), 5396-5411. https://doi.org/10.1016/j.ijsolstr.2007.01.007
  23. Love, A. (2013), A Treatise on the Mathematical Theory of Elasticity, Cambridge University Press
  24. Lodygowski, T., Rusinek, A., Jankowiak, T. and Sumelka, W. (2012), "Selected topics of high speed machining analysis", Eng. Tran., 60(1), 69-96.
  25. Mannan, S. (2013), Lees' Process Safety Essentials: Hazard Identification, Assessment and Control, Butterworth-Heinemann.
  26. Mazek, S.A. (2014), "Performance of sandwich structure strengthened by pyramid cover under blast effect", Struct. Eng. Mech., 50(4), 471-486. https://doi.org/10.12989/sem.2014.50.4.471
  27. Meleshko, V. (1997), "Bending of an elastic rectangular clamped plate: Exact versus 'engineering ' solutions", J. Elast., 48(1), 1-50. https://doi.org/10.1023/A:1007472709175
  28. Mougeotte, C., Carlucci, P., Recchia, S. and Ji, H. (2010). "Novel approach to conducting blast load analyses using Abaqus/Explicit-CEL", 2010 SIMULIA Customer Conference.
  29. Ngo, T., Mendis, P., Gupta, A. and Ramsay, J. (2007), "Blast loading and blast effects on structures-an overview", Elec. J. Struct. Eng., 7, 76-91.
  30. Nurick, G. and Shave, G. (1996), "The deformation and tearing of thin square plates subjected to impulsive loads-an experimental study", Int. J. Impact Eng., 18(1), 99-116. https://doi.org/10.1016/0734-743X(95)00018-2
  31. Rigby, S.E., Tyas, A., Clarke, S.D., Fay, S.D., Reay, J.J., Warren, J.A., Gant, M. and Elgy, I. (2015), "Observations from preliminary experiments on spatial and temporal pressure measurements from near-field free air explosions", Int. J. Protect. Struct., 6(2), 175-190. https://doi.org/10.1260/2041-4196.6.2.175
  32. Rudrapatna, N., Vaziri, R. and Olson, M. (1999), "Deformation and failure of blast-loaded square plates", Int. J. Impact Eng., 22(4), 449-467. https://doi.org/10.1016/S0734-743X(98)00046-3
  33. Shin, J., Whittaker, A.S. and Cormie, D. (2015), "TNT equivalency for overpressure and impulse for detonations of spherical charges of high explosives", Int. J. Protect. Struct., 6(3), 567-579. https://doi.org/10.1260/2041-4196.6.3.567
  34. Sielicki, P., Lodygowski, T., Al-Rifaie, H. and Sumelka, W. (2017), "Designing of blast resistant lightweight elevation system-numerical study", Procedia Eng., 172, 991-998. https://doi.org/10.1016/j.proeng.2017.02.126
  35. Sielicki, P. and Stachowski, M. (2015), "Implementation of sapper-blast-module, a rapid prediction software for blast wave properties", Central Eur. J. Energ. Mater., 12(3), 473-486.
  36. Sielicki, P.W. (2013), Masonry Failure under Unusual Impulse Loading, Poznan, Poland.
  37. Sumelka, W. and Lodygowski, T. (2011), "The influence of the initial microdamage anisotropy on macrodamage mode during extremely fast thermomechanical processes", Arch. Appl. Mech., 81(12), 1973-1992. https://doi.org/10.1007/s00419-011-0531-2
  38. Szymczyk, M., Sumelka, W. and Lodygowski, T. (2017), "Numerical investigation on ballistic resistance of aluminium multi-layered panels impacted by improvised projectiles", Arch. Appl. Mech., DOI: 10.1007/s00419-017-1247-8.
  39. Taylor, G. (1963), "The pressure and impulse of submarine explosion waves on plates", Scientific papers of GI Taylor, 3, 287-303.
  40. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959), Theory of Plates and Shells, McGraw-hill
  41. TM5-1300 (1990), Structures to Resist the Effects of Accedental Explosions, US Departments of Army, US Navy, Air Force, USA.
  42. Vaziri, A. and Hutchinson, J.W. (2007), "Metal sandwich plates subject to intense air shocks", Int. J. Solid. Struct., 44(6), 2021-2035. https://doi.org/10.1016/j.ijsolstr.2006.08.038
  43. Wang, W., Zhang, D., Lu, F. and Liu, R. (2013), "A new SDOF method of one-way reinforced concrete slab under non-uniform blast loading", Struct. Eng. Mech., 46(5), 595-613. https://doi.org/10.12989/sem.2013.46.5.595
  44. Yuen, S.C.K., Nurick, G., Langdon, G. and Iyer, Y. (2016), "Deformation of thin plates subjected to impulsive load: Part III-an update 25 years on", Int. J. Impact Eng., 107, 108-117
  45. Yun, N., Shin, D., Ji, S. and Shim, C. (2014), "Experiments on blast protective systems using aluminum foam panels", KSCE J. Civil Eng., 18(7), 2153-2161. https://doi.org/10.1007/s12205-014-0092-3