DOI QR코드

DOI QR Code

Investigation of load transfer along interfaces of jacketed square columns

  • Achillopoulou, Dimitra V. (Department of Structural and Geotechnical Engineering, La Sapienza University of Rome)
  • 투고 : 2016.11.02
  • 심사 : 2017.03.20
  • 발행 : 2017.08.10

초록

This study deals with a numerical investigation of load transfer along interfaces of jacketed columns using finite element models. Appropriate plasticity and constitutive models are used to simulate the response of concrete and steel bars. Experimental data were used to calibrate the simulation of mechanical characteristics. The different compressive strength of core and jacket concrete, the confinement ratio, the dowels' diameter size and the load pattern shapes were considered. The path diagrams along the interfaces elucidate the areas around the dowel bars where due to stress concentration plastic hinges and intense discontinuities are created. The stress flow also depicts the contribution of confinement of the jacketed area to the overall resonant load capacity of the core column. The scope of the research is to identify and quantify the shear transfer along the interfaces of strengthened elements.

키워드

참고문헌

  1. Achilllopoulou, D.V. (2016), "Understanding the basic mechanisms acting on interfaces: concrete elements, materials and techniques", Adv. Mater. Interf., 205-247.
  2. Achillopoulou, D.V. and Karabinis, A.I. (2013), "Investigation of shear transfer mechanisms in repaired damaged concrete columns strengthened with RC jackets", Struct. Eng. Mech., 47(4), 575-598. https://doi.org/10.12989/sem.2013.47.4.575
  3. Achillopoulou, D.V., Pardalakis, T. and Karabinis, A.I. (2014), "Construction deficiencies effect on the behavior of reinforced concrete columns under repeated axial loads_experimental and analytical investigation", Transactions of the VSB-Technical University of Ostrava, 14(2), Civil Engineering Series.
  4. Achillopoulou, D.V., Pardalakis, T.A. and Karabinis, A.I. (2013), "Investigation of force transfer mechanisms in retrofitted RC columns with RC jackets containing welded bars subjected to axial compression", ECCOMAS Thematic Conference-COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings-An IACM Special Interest Conference, 4029-4038.
  5. Achillopoulou, D.V., Skeparnis, E. and Karabinis, A.I. (2014), "Investigation of the interface behaviour of retrofitted concrete columns through finite element analysis", Second European Conference on Earthquake Engineering and Seismology, Instabul.
  6. Achillopoulou, D.V., Tasiopoulos, T.P.K. and Karabinis, A.I. (2013), "Study of the behavior of RC columns strengthened with RC jackets containing dowels and different confinement ratios", Thematic Conference-COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Proceedings - An IACM Special Interest Conference, 4018-4028.
  7. Alejano, L.R. and Bobet, A. (2012), "Drucker-Prager criterion", Rock Mech. Rock Eng., 45(6), 995-999. https://doi.org/10.1007/s00603-012-0278-2
  8. Arslan, G. (2007), "Sensitivity study of the Drucker-Prager modeling parameters in the prediction of the nonlinear response of reinforced concrete structures", Mater. Des., 28(10), 2596-2603. https://doi.org/10.1016/j.matdes.2006.10.021
  9. EN 1998-3 (2005), Eurocode 8: Design of structures for earthquake resistance-Part 3: Assessment and retrofitting of Buildings.
  10. He, X.G. and Kwan, A.K.H., (2001), "Modelling dowel action of reinforcement bars for finite element analysis of concrete structures", Comput. Struct., 79(6), 595-604. https://doi.org/10.1016/S0045-7949(00)00158-9
  11. Jankowiak, T. and Lodygowski, T. (2015), Plasticity Conditions and Failure Criteria for Quasi-brittle Materials, Handbook of Damage Mechanics Nano to Macro Scale for Materials and Structures.
  12. Jiang, J.F. and Wu, Y.F. (2012), "Identification of material parameters for Drucker-Prager plasticity model for FRP confined circular concrete columns", Int. J. Solid. Struct., 49(3-4), 445-456. https://doi.org/10.1016/j.ijsolstr.2011.10.002
  13. Julio, E.N.B.S. and Branco, F.A.B. (2008), "Reinforced concrete jacketing- interface influence on cyclic loading response", ACI Struct. J., 105(4), 471-477.
  14. Karabinis, A., Rousakis, T. and Manolitsi, G. (2008), "3D finiteelement analysis of substandard RC columns strengthened by fiber-reinforced polymer sheets", J. Compos. Construct., 12(5), 531-540. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:5(531)
  15. Kwan, A.K.H. and Ng, P.L. (2013), "Modelling dowel action of discrete reinforcing bars for finite element analysis of concrete structures", Comput. Concrete, 12(1), 19-36. https://doi.org/10.12989/cac.2013.12.1.019
  16. Lei, D., Chen, G., Chen, Y. and Ren, Q. (2012), "Experimental research and numerical simulation of RC beams strengthened with bonded steel plates", Science China Technological Sciences, 1-8.
  17. Sengottaiyan, K. and Jagadeesan, K., (2013), "Retrofitting of columns with RC jacketing an experimental behavior", J. Theor. Appl. Inform. Technol., 56(3), 349-354
  18. Teng, J.G. and Lam, L. (2004), "Behavior and modeling of fiber reinforced polymer-confined concrete", J. Struct. Eng., ASCE, 130(11), 1713-1723. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1713)

피인용 문헌

  1. Ultimate shear strength prediction model for unreinforced masonry retrofitted externally with textile reinforced mortar vol.19, pp.6, 2017, https://doi.org/10.12989/eas.2020.19.6.411