DOI QR코드

DOI QR Code

Evaluation of ductility and response modification factor in moment-resisting steel frames with CFT columns

  • Hashemi, Seyed Sh. (Department of Civil Engineering, Persian Gulf University) ;
  • Sadeghi, Kabir (Department of Civil Engineering, Near East University) ;
  • Vaghefi, Mohammad (Department of Civil Engineering, Persian Gulf University) ;
  • Shayan, Kaveh (Department of Civil Engineering, Islamic Azad University of Bushehr)
  • Received : 2016.07.27
  • Accepted : 2017.05.25
  • Published : 2017.06.25

Abstract

One of the methods to strengthen the structures against the seismic lateral loading is the employment of the composite columns. A concrete-filled tube (CFT) has the cumulative advantages of steel and concrete. Concrete-filled steel tube columns have been widely used in the moment-resisting frame (MRF) structures, located in both non-seismic zones and high-risk seismic zones. In this paper, the results of studies on two important seismic parameters of ductility and the response modification factor (RMF) of the MRFs with CFT columns are submitted. While the studies are carried out, the effects of span length-story height ratio, the strength of materials and seismic behavior of MRFs are considered. In this regard, the ductility, RMF and the strength of 36 models of the steel MRFs with CFTs are analyzed. The fiber plastic hinges numerical simulation and pushover analysis method are used in the calculations. Based on the obtained results, the RMFs suitable for the 5-, 10- and 15- story frames are proposed.

Keywords

References

  1. ANSI/AISC 360-05 (2005), Specification for Structural Steel Building, American Institute of Steel Construction, Chicago.
  2. ASCE/SEI 7-05-2006 (2006), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, New York.
  3. Building Seismic Safety Council (2001), NEHRP, Recommended Provisions for Seismic Regulations for New Buildings and Other Structures (FEMA 450): Provisions/Prepared by the Building Seismic Safety Council, National Institute of Building Sciences, Washington.
  4. Computers and Structures, Inc. (2010), SAP 2000 advanced 14.2.0, Berkeley, California, USA.
  5. Esfandyary, R., Razzaghi, M.S. and Eslami, A. (2015), "A parametric investigation on the hysteretic behaviour of CFT column to steel beam connections", Struct. Eng. Mech., 55(1), 205-228. https://doi.org/10.12989/sem.2015.55.1.205
  6. Evirgen, B., Tuncan, A. and Taskin, K. (2014), "Structural behavior of concrete filled steel tubular sections (CFT/CFSt) under axial compression", Thin-Wall. Struct., 80, 46-56. https://doi.org/10.1016/j.tws.2014.02.022
  7. Han, L.H., Wang, W.D. and Zhao, X.L. (2008), "Behavior of steel beam to concrete-filled SHS Column frames: finite element model and verifications", Eng. Struct., 30(6), 1647-1658. https://doi.org/10.1016/j.engstruct.2007.10.018
  8. Hu, H.T., Huang, C.S., Wu, M.H. and Wu, W.M. (2003), "Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect", J. Struct. Eng., 129(10), 1322-1329. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322)
  9. JGJ101-96 (1996), Chinese Specification of Testing Methods for Earthquake Resistant Building, Architecture Industrial Press of China, Beijing.
  10. Jiango, N., Kai, Q. and Yan, X. (2006), "Push-over analysis of the seismic behavior of a concrete-filled rectangular tubular frame structure", Tsinghua Sci. Technol., 11(1), 124-130. https://doi.org/10.1016/S1007-0214(06)70165-1
  11. Karamis, G.S., Skalomenos, K.A., Hatzigeorgiou, G.D. and Beskos, D.E. (2016), "Seismic damage estimation of in-plane regular steel/concrete composite moment resisting frames", Eng. Struct., 115, 67-77. https://doi.org/10.1016/j.engstruct.2016.01.053
  12. Kassaei, A., Pourzeiali, S. and Ghaffari, E. (2010), "The effect of the number of defined fibers in the plastic hinges on the dynamic non-linear response of the steel buildings", 5th National Congress on Civil Engineering, Mashhad, Iran. (in Persian)
  13. Kuranovas, A. and Kvedaras, A.K. (2007), "Behavior of hollow concrete-filled steel tubular composite elements", J. Civ. Eng. Manage., 13(2), 131-141.
  14. Kwon, Y.B. and Jeong, I.K. (2014), "Resistance of rectangular concrete-filled tubular (CFT) sections to the axial load and combined axial compression and bending", Thin-Wall. Struct., 79, 178-186. https://doi.org/10.1016/j.tws.2014.02.019
  15. Lee, S.H., Uy, B., Kim, S.H., Choi, Y.H. and Choi, S.M. (2010), "Behavior of high-strength circular concrete-filled steel tubular (CFST) column under eccentric loading", J. Constr. Steel Res., 67(1), 1-13. https://doi.org/10.1016/j.jcsr.2010.07.003
  16. Long, Y.L., Wan, J. and Cai, J. (2016), "Theoretical study on local buckling of rectangular CFT columns under eccentric compression", J. Constr. Steel Res., 120, 70-80. https://doi.org/10.1016/j.jcsr.2015.12.029
  17. McCormack, J.C. (2007), Structural Steel Design (LRFD Method), Harpercollins College Div, Mishawaka, India.
  18. Nateghi Elahi, F. (2008), "An experimental investigation of concrete filled tube columns (CFST) ductility", Scientific Res. J. Struct. Steel, 3(5), 3-12. (in Persian)
  19. Park, R. (1989), "Evaluation of ductility of structures and structural assemblages from laboratory testing", Bull. NZ. Nat'l Soc. Earthq. Eng., 22(3), 155-166.
  20. Park, T., Hwang, W.S., Leon, R.T. and Hu, J.W. (2011), "Damage evaluation of composite-special moment frames with concretefilled tube columns under strong seismic loads", KSCE J. Civ. Eng., 15(8), 1381-1394. https://doi.org/10.1007/s12205-011-1225-6
  21. Pokharel, T., Yao, H., Goldsworthy, H.M. and Gad, E.F. (2016), "Experimental and analytical behaviour of cogged bars within Concrete Filled Circular Tubes", Steel Compos. Struct., 20(5), 1067-1085. https://doi.org/10.12989/scs.2016.20.5.1067
  22. Schneider, S.P. and Kramer, D.R. (2004), "The design and construction of concrete-filled steel tube columns frames", 13th World Conference on Earthquake Engineering, Vancouver, August.
  23. Tasnimi, A.A. and Masoumi, A. (2006), Calculation of Armed Concrete Moment Resisting Frames' Response Modification Factor, Research Center of Building and Houses, Tehran, Iran. (in Persian)
  24. The management and planning organization of country (2006), Instruction for Seismic Improvement in the Existing Buildings of Country, the technical affairs office of measures establishment and reducing the risk of earthquakes, Tehran. (in Persian)
  25. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2004), "Seismic behavior and design of high-strength square concretefilled steel tube beam columns", J. Struct. Eng., 130(2), 169-179. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(169)
  26. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  27. Xiamuxi, A., Hasegawa, A. and Yu, J. (2015), "A study on nonlinear analysis and confinement effect of reinforced Concrete Filled Steel tubular column", Struct. Eng. Mech., 56(5), 727-743. https://doi.org/10.12989/sem.2015.56.5.727
  28. Xiao, Y., He, W., Mao, X., Choi, K.K. and Zhu, P. (2005), "Confinement design of CFT columns for improved seismic performance", J. Struct. Eng., 131(3), 488-497. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(488)
  29. Zhang, D., Gao, S. and Gong, J. (2012), "Seismic behaviour of steel beam to circular CFST column assemblies with external diaphragms", J. Constr. Steel Res., 76, 155-166. https://doi.org/10.1016/j.jcsr.2012.03.024

Cited by

  1. Local, Story, and Global Ductility Evaluation for Complex 2D Steel Buildings: Pushover and Dynamic Analysis vol.9, pp.1, 2019, https://doi.org/10.3390/app9010200
  2. Energy Dissipation and Local, Story, and Global Ductility Reduction Factors in Steel Frames under Vibrations Produced by Earthquakes vol.2018, pp.None, 2017, https://doi.org/10.1155/2018/9713685