DOI QR코드

DOI QR Code

An innovative vibration barrier by intermittent geofoam - A numerical study

  • Majumder, Mainak (Department of Civil Engineering, Indian Institute of Technology Kanpur) ;
  • Ghosh, Priyanka (Department of Civil Engineering, Indian Institute of Technology Kanpur) ;
  • Sathiyamoorthy, Rajesh (Department of Civil Engineering, Indian Institute of Technology Kanpur)
  • 투고 : 2015.11.28
  • 심사 : 2017.03.07
  • 발행 : 2017.08.25

초록

A new technique is proposed to obtain more effective screening efficiency against the ground vibration using intermittent geofoam (IF) in-filled trench. The numerical analysis is performed by employing two-dimensional finite element method under dynamic condition. Vertically oscillated strip foundation is considered as the vibration source. In presence of the ground vibration, the vertical displacements at different locations (pick-up points) along the ground surface are captured to determine the amplitude reduction factor (ARF), which helps to assess the efficiency of the vibration screening technique. The efficiency of IF over continuous geofoam (CF) in-filled vibration barriers is assessed by varying the geofoam density, the location of trench and the frequency of excitation. The results from this study indicate that a significant reduction in ARF can be achieved by using intermittent geofoam as compared to continuous geofoam. Further, it is noticed that the efficiency of IF increases with an increase in the frequency of the vibrating source. These encouraging results put forward the potential of utilising intermittent geofoam as a vibration screening material.

키워드

참고문헌

  1. Ahmad, S. and Al-Hussaini, T.M. (1991), "Simplified design for passive isolation by open and in-filled trenches", J. Geotech. Eng. Div., ASCE, 117(1), 67-68. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(67)
  2. Ahmad, S., Al-Hussaini, T.M. and Fishman, K.L. (1994), "An investigation on active isolation of machine foundations by open trenches", J. Geotech. Eng., ASCE, 122(6), 454-461.
  3. Ahamd, S., Baker, J. and Li, J. (1995), "Experimental and Numerical investigation on vibration screening by in-filled trenches", Proceedings of the 3rd International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, Volume 11, St, Louis, Missouri, April.
  4. Al-Hussaini, T.M. and Ahmad, S. (1996), "Active isolation of machine foundations by in-filled trench barriers", J. Geotech. Eng., 122(4), 288-294. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:4(288)
  5. Alzawi, A. (2011), "Vibration isolation using in-filled geofoam trench barriers", Ph.D. Dissertation; The University of Western Ontario, London, Ontario, Canada.
  6. Alzawi, A. and El Naggar, M.H. (2009), "Vibration scattering using geofoam material as vibration wave barriers", GeoHalifax, Proceedings of the 62nd Canadian Geotechnical Conference, NB, Canada, September.
  7. ASTM D6817-06 (2006), Standard specification for rigid cellular polystyrene geofoam; American Society of Testing and Materials, West Conshohocken, PA, USA.
  8. Babaei, H., Mirzababaie Mostofi, T. and Alitavoli, M. (2015), "Study on the response of circular thin plate under low velocity impact", Geomech. Eng., Int. J., 9(2), 207-218. https://doi.org/10.12989/gae.2015.9.2.207
  9. Babu, G.S., Srivastava, A., Rao, K.N. and Venkatesha, S. (2011), "Analysis and design of vibration isolation system using open trenches", Int. J. Geomech., 11(5), 364-369. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000103
  10. Banerjee, P.K., Ahmad, S. and Chen, K. (1988), " Advanced application of BEM to wave barriers in multilayered three-dimensional soil media", Earthq. Eng. Struct. Dyn., 16(7), 1041-1069. https://doi.org/10.1002/eqe.4290160707
  11. Celebi, E., Firat, S., Beyhan, G., Cankaya, I., Vural, I. and Kirtel, O. (2009), "Field experiments on wave propagation and vibration isolation by using wave barriers", Soil Dyn. Earthq. Eng., 29(5), 824-833. https://doi.org/10.1016/j.soildyn.2008.08.007
  12. Celebi, E. and Goktepe, F. (2012), "Non-linear 2-D FE analysis for the assessment of isolation performance of wave impeding barrier in reduction of railway-induced surface waves", Constr. Build. Mater., 36, 1-13. https://doi.org/10.1016/j.conbuildmat.2012.04.054
  13. Chatterjee, K., Choudhury, D., Dilli Rao, V. and Mukherjee, S.P. (2015), "Dynamic analyses and field observations on piles in Kolkata city", Geomech. Eng., Int. J., 8(2), 415-440. https://doi.org/10.12989/gae.2015.8.3.415
  14. Dasgupta, G., Beskos, D.E. and Vardoulakis, I.G. (1988), "3-D analysis of vibration isolation of machine foundations", Proceedings of the 10th Boundary Elements Conference, (C.A. Brebbia, Ed.), Springer-Verlag, Berlin, Germany, September, Volume 4, pp. 59-73.
  15. Davies, M.C. (1994), "Dynamic soil-structure interaction resulting from blast loading", Proceedings of the International Conference on Centrifuge Modelling (Centrifuge) Singapore, Rotterdam, The Netherlands, August-September.
  16. Ekanayake, S.D., Liyanapathirana, D.S. and Leo, C.J. (2014), "Attenuation of ground vibrations using infilled wave barriers", Soil Dyn. Earthq. Eng., 67, 290-300. https://doi.org/10.1016/j.soildyn.2014.10.004
  17. Gao, G.Y., Song, J. and Yang, J. (2014), "Identifying boundary between near field and far field in ground vibration caused by surface loading", J. Central South Univ., 21(8), 3284-3294. https://doi.org/10.1007/s11771-014-2301-0
  18. Ghosh, P. and Kumari, R. (2012), "Seismic interference of two nearby horizontal strip anchors in layered soil", Nat. Hazards, 63(2), 789-804. https://doi.org/10.1007/s11069-012-0187-4
  19. Goktepe, F., Kuyuk, H.S. and Celebi, E. (2014), "Efficiency of wave impeding barrier in pipeline construction under earthquake excitation using non-linear finite element analysis", SADHANA-Academy Proceedings in Engineering Sciences, 39(2), 419-436.
  20. Inglis, D., Macleod, G., Naesgaard, E. and Zergoun, M. (1996), "Basement wall with seismic earth pressure and novel expanded polystyrene from buffer layer", Proceedings of the 10th Annual Symposium of the Vancouver Geotechnical Society, Vancouver, British Columbia, Canada, June, p. 18.
  21. Kattis, S.E., Polyzos, D. and Beskos, D.E. (1999), "Modelling of pile barriers by effective trenches and their screening effectiveness", Soil Dyn. Earthq. Eng., 18(1), 1-10. https://doi.org/10.1016/S0267-7261(98)00032-3
  22. Kramer, S.L. (1996), Geotechnical Earthquake Engineering, Prentice-Hall International Series in Civil Engineering and Engineering Mechanics, Prentice-Hall, NJ, USA, pp. 281-283.
  23. Lysmer, J. and Kuhlmeyer, R.L. (1969), "Finite dynamic model for infinite media", J. Eng. Mech. Div., Proceedings of ASCE, 95(4), 859-877.
  24. Massarsch, K.R. (2005), "Vibration isolation using gas-filled cushions", Soil Dynamic Symposium to Honor Prof. Richard D. Woods (Invited Paper) Geo-Frontiers 2005, Austin, Texas, January.
  25. Murillo, C., Thorel, L. and Caicedo, B. (2009), "Ground vibration isolation with geofoam barriers: Centrifuge modelling", Geotext. Geomembr., 27(6), 423-434. https://doi.org/10.1016/j.geotexmem.2009.03.006
  26. PLAXIS, 2D-Version 8.5 (2002), Geotechnical code for soil and rock analysis; User's Manual, (Brinkgreev, R.B.J. Ed.), A.A., Balkema Publishers, Netherlands.
  27. Prathap Kumar, M.T., Ramesh, H.N., Raghavebdra Rao, M.V. and Asha, M. (2010), "A comperative study on damping of finite dry and saturated sand stratum under vertical vibrations", Geomech. Eng., Int. J., 2(1), 29-44. https://doi.org/10.12989/gae.2010.2.1.029
  28. Richart, F., Hall, J. and Woods, R. (1970), Vibration of Soils and Foundations, Prentice Hall, Englewood Cliffs, NJ, USA.
  29. Saikia, A. (2014), "Numerical study on screening of surface waves using a pair of softer backfilled trenches", Soil Dyn. Earthq. Eng., 65, 206-213. https://doi.org/10.1016/j.soildyn.2014.05.012
  30. Saikia, A. and Das, U.K. (2014), "Analysis and design of open tench barriers in screening steady-state surface vibrations", Earthq. Eng. Eng. Vib., 13(3), 545-554. https://doi.org/10.1007/s11803-014-0261-x
  31. Segol, G., Lee, P.C.Y. and Abel, J.R. (1978), "Amplitude reduction of surface waves by trenches", J. Eng. Mech. Div., ASCE, 104(3), 621-641.
  32. Triandafilidis, G.E. (1965), "The dynamic response of continuous footings supported on cohesive soil", Proceedings 6th International Conference on Soil Mechanics and Foundation Engineering, Montreal Canada, September.
  33. Ulgen, D. and Toyger, O. (2015), "Screening effectiveness of open and in-filled wave barriers: A full-scale experimental study", Constr. Build. Mater., 86, 12-20. https://doi.org/10.1016/j.conbuildmat.2015.03.098
  34. Valliappan, H.S. and Murti, V. (1984). "Finite element constraints in the analysis of wave propagation problems", UNICIV Rep. No. R-218; School of Civil Engineering, University of New South Wales, Australia.
  35. Wang, Z.L., Li, Y.C. and Wang, J.G. (2006), "Numerical analysis of attenuation effect of EPS geofoam on stress waves in civil defense engineering", Geotext. Geomembr., 2(5), 265-273.
  36. Woods, R.D. (1968), "Screening of surface waves in soils", J. Soil Mech. Found Eng., ASCE, 94(4), 951-979.
  37. Woods, R.D., Bernett, N.E. and Sagesser, R. (1974), "Holography, a new tool for soil dynamics", J. Geotech. Eng., ASCE, 100(11), 1231-1247.
  38. Zarnani, S. and Bathurst, R.J. (2007), "Experimental investigation of EPS geofoam seismic buffers using shaking table tests", Geosynth. Int., 14(3), 165-177. https://doi.org/10.1680/gein.2007.14.3.165
  39. Zoccali, P., Cantisani, G. and Loprencipe, G. (2015), "Ground-vibrations induced by trains: Filled trenches mitigation capacity and length influence", Constr. Build. Mater., 74, 1-8. https://doi.org/10.1016/j.conbuildmat.2014.09.083

피인용 문헌

  1. A novel vibration screening technique using bamboo: a numerical study vol.17, pp.2, 2017, https://doi.org/10.1080/15440478.2018.1480448
  2. Numerical Investigation on Vibration Screening Using Geofoam and Sand-Crumb Rubber Mixture Infilled Trench vol.7, pp.4, 2017, https://doi.org/10.1007/s40891-021-00329-z
  3. Impact of Footing Shape on Dynamic Properties and Vibration Transmission Characteristics of Machine Foundations vol.8, pp.1, 2017, https://doi.org/10.1007/s40891-021-00347-x