참고문헌
- Lee, S. W. and Kim, S. U., 2010, "Tip Gap Height Effects on the Aerodynamic Performance of a Cavity Squealer Tip in a Turbine Cascade in Comparison with Plane Tip Results: Part 1 - Tip Gap Flow Structure," Experiments in Fluids, Vol. 49, pp. 1039 1051. https://doi.org/10.1007/s00348-010-0848-6
- Lee, S. W. and Choi, M. Y., 2010, "Tip Gap Height Effects on the Aerodynamic Performance of a Cavity Squealer Tip in a Turbine Cascade in Comparison with Plane Tip Results: Part 2 - Aerodynamic Losses," Experiments in Fluids, Vol. 49, pp. 713-723. https://doi.org/10.1007/s00348-010-0849-5
- Lee, S. W., Cheon, J. H. and Zhang, Q., 2014, "The Effect of Full Coverage Winglets on Tip Leakage Aerodynamics over the Plane Tip in a Turbine Cascade," International Journal of Heat and Fluid Flow, Vol. 45, pp. 23-32. https://doi.org/10.1016/j.ijheatfluidflow.2013.11.006
- Cheon, J. H. and Lee, S. W., 2015, "Tip Leakage Aerodynamics over the Cavity Squealer tip Equipped with Full Coverage Winglets in a Turbine Cascade," International Journal of Heat and Fluid Flow, Vol. 56, pp. 60-70. https://doi.org/10.1016/j.ijheatfluidflow.2015.07.003
- Aslanidou, I., Rosic, B., Kanjirakkad, V. and Uchida, S., 2013, "Leading Edge Shielding Concept in Gas Turbines with Can Combustor," ASME Journal of Turbomachinery, Vol. 135, 021019.
- Lyall, M. E., King, P. and Sondergaard, R., 2013, "Endwall Loss and Mixing Analysis of a High Lift Low Pressure Turbine Cascade," ASME Journal of Turbomachinery, Vol. 135, 051006. https://doi.org/10.1115/1.4007801
- Saha, R., Mamaaev, B. I., Fridh, J., Laumert, B. and Fransson, T. H., 2014, "Influence of Prehistory and Leading Edge Contouring on Aero Performance of a Three-Dimensional Nozzle Guide Vane," ASME Journal of Turbomachinery, Vol. 136, 071014. https://doi.org/10.1115/1.4026076
- Lyall, M. E., King, P., Clark, J. P. and Sondergaard, R., 2014, "Endwall Loss Reduction of High Lift Low Pressure Turbine Airfoils using Profile Contouring - Part 1: Airfoil Design," ASME Journal of Turbomachinery, Vol. 136, 081005. https://doi.org/10.1115/1.4025951
- Saha, R., Fridh, J., Fransson, T. H., Mamaev, B. I., Annerfeldt, M. and Utriainen, E., 2014, "Shower Head and Trailing Edge Cooling Influence on Transonic Vane Aero Performance," ASME Journal of Turbomachinery, Vol. 136, 111001. https://doi.org/10.1115/1.4028024
- Treaster, A. L. and Yocum, A. M., 1979, "The Calibration and Application of Five-Hole probes," ISA Transactions, Vol. 18, pp. 23-34.
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, "ASME Measurement Uncertainty," ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164. https://doi.org/10.1115/1.3242450
- Baker, C. J., 1980, "The Turbulent Horseshoe Vortex," Journal of Wind Engineering and Industrial Aerodynamics, Vol. 6, pp. 9-23. https://doi.org/10.1016/0167-6105(80)90018-5
- Eckerle, W. A. and Langston, L. S., 1986, "Horseshoe Vortex Formation Around a Cylinder," ASME Paper No. 86-GT-246.