참고문헌
- Y. Qian, P. Wei, X. Zhao, P. Jiang, and H. Yu, "Flame retardancy and thermal stability of polyhedral oligomeric silsesquioxane nanocomposites", Fire. Mater., 37, 1 (2013). https://doi.org/10.1002/fam.1126
- S. Y. Lu, I. Hamerton, "Recent developments in the chemistry of halogen-free flame retardant polymers", Prog. Polym. Sci., 27, 1661 (2002). https://doi.org/10.1016/S0079-6700(02)00018-7
- P. Georlette, J. Simons, and L. Costa, "Halogen-containing fire-retardant compounds", in: A.F. Grand, C.A. Wilkie (Eds.), "Fire Retardancy of Polymeric Materials", Marcel Dekker, Inc, New York.Basel, p. 245, (2000).
- L. S. Birnbaum and D. F. Staskal, "Brominated flame retardants: Cause for concern", Environ. Health Perspect., 112, 9 (2004). https://doi.org/10.1289/ehp.1121c9
- L. J. Qian, L. J. Ye, Y. Qiu, and S. R. Qu, "Thermal degradation behavior of the compound containing phosphaphenanthrene and phosphazene groups and its flame retardant mechanism on epoxy resin", Polymer, 52, 5486 (2011). https://doi.org/10.1016/j.polymer.2011.09.053
- B. Perret, B. Schartel, K. Stoess, M. Ciesielski, J. Diederichs, M. Doering, et al., "Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation", Eur. Polym. J., 47, 1081 (2011). https://doi.org/10.1016/j.eurpolymj.2011.02.008
- M. Ciesielski, A. Schaefer, and M. Doering, "Novel efficient DOPO-based flame-retardants for PWB relevant epoxy resins with high glass transition temperatures", Polym. Adv. Technol., 19, 507 (2008).
- W. Liu, Z. Wang, L. Xiong, and L. Zhao, "Phosphorus containing liquid cycloaliphatic epoxy resins for reworkable environment-friendly electronic packaging materials", Polymer, 51, 4776 (2010). https://doi.org/10.1016/j.polymer.2010.08.039
- E. D. Weil and S. V. Levchik, "Commercial flame retardancy of unsaturated polyester and vinyl resins: review", J. Fire Sci., 22, 293 (2004). https://doi.org/10.1177/0734904104041210
- H. Kato, H. Adachi, and H. Fujita, "Innovation in flame and heat resistant EPDM formulations", Rubber Chem. Technol., 50, 287 (1983).
- D. F. Lawson, E. L. Kay, and D. T. Roberts Jr, "Mechanism of smoke inhibition by hydrated fillers", Rubber Chem. Technol., 48, 124 (1975). https://doi.org/10.5254/1.3545032
- C. Yang and W. T. Chen, "Effects of brominated flame retardants and crosslinking agents on the flame retardancy of rubbers", J. Appl. Polym. Sci., 36, 963 (1988). https://doi.org/10.1002/app.1988.070360418
- G. Janowska and L. Slusarski, "Effect of mineral fillers on thermal properties and flammability of cis-1,4-polyisoprene vulcanizates", J. Therm. Anal., 45, 1579 (1995). https://doi.org/10.1007/BF02547451
- K. E. George, in: Blends and Alloys, first ed., Chapman and Hall, London, 1993.
- L. N. Valsamis, M. R. Kearney, S. S. Dagli, D. D. Merhta, and A. P. Polchocki, "Phase morphology of a model polyblend fabricated in industrial mixers: Time and melt flow dependent supradomain structures", Adv. Polym. Technol., 8, 115 (1988). https://doi.org/10.1002/adv.1988.060080202
- M. H. Walters and D. N. Keyte, "Heterogeneous structure in blends of rubber polymers", Rubber Chem. Technol., 38, 62 (1965). https://doi.org/10.5254/1.3535639
- K. E. George, R. Joseph, and D. Francis, "Studies on NBR/PVC blends", J. Appl. Polym. Sci., 32, 2867 (1986). https://doi.org/10.1002/app.1986.070320102
- B. Ohlsson, H. Hassander, and B. Tornell, "Effect of the mixing procedure on the morphology and properties of compatibilized polypropylene/polyamide blends", Polymer, 39, 4715 (1998). https://doi.org/10.1016/S0032-3861(97)10291-9
- N. Kukaleva, M. Jollands, F. Cser, and E. Kosior, "Influence of phase structure on impact toughening of isotactic polypropylene by metallocene-catalyzed linear low-density polyethylene", J. Appl. Polym. Sci., 76, 1011 (2000). https://doi.org/10.1002/(SICI)1097-4628(20000516)76:7<1011::AID-APP4>3.0.CO;2-Q
- S. N. Koklas, D. D. Sotiropoulou, J. K. Kallitsis, and N. K. Kalfoglou, "Compatibilization of chlorinated polyethylene/poly(vinyl chloride) blends with epoxidized natural rubber", Polymer, 32, 66 (1991). https://doi.org/10.1016/0032-3861(91)90563-X
- W. Yang, Q. Wu, L. Zhon, and S. Wang, "Styrene-co-acrylonitrile resin modifications of PVC/CPE blends", J. Appl. Polym. Sci., 66, 1455 (1997). https://doi.org/10.1002/(SICI)1097-4628(19971121)66:8<1455::AID-APP5>3.0.CO;2-D
- J. Li, R. A. Shanks, and Y. Long, "Mechanical properties and morphology of polyethylene-polypropylene blends with controlled thermal history", J. Appl. Polym. Sci., 76, 1151 (2000). https://doi.org/10.1002/(SICI)1097-4628(20000516)76:7<1151::AID-APP19>3.0.CO;2-H
- J. Lyon, The chemistry and uses of fire retardant, Wiley Interscience, New York, 1970.
- A. Y. Coran and R. Patel, "Rubber-thermoplastic compositions. Part VIII. nitrile rubber polyolefin blends with technological compatibilization", Rubber Chem. Technol., 56, 1045 (1983). https://doi.org/10.5254/1.3538165
- Z. Z. Li and B. J. Qu, "Effects of gamma irradiation on the properties of flame-retardant EVM/magnesium hydroxide blends", Radiat. Phys. Chem., 69, 137 (2004). https://doi.org/10.1016/S0969-806X(03)00446-8
- S. G. Chen, Y. Zhang, R. Y. Wang, H. Y. Yu, M. Hoch, and S. R. Guo, "Mechanical properties, flame retardancy, hot-air ageing, and hot-oil ageing resistance of ethylene-vinyl acetate rubber/hydrogenated nitrile-butadiene rubber/magnesium hydroxide composites", J. Appl. Polym. Sci., 114, 3310 (2009). https://doi.org/10.1002/app.30620
- R. Brown, Physical testing of rubbers, 3rd ed.; Chapman and Hall: London, 1996.
- P. Sa-Nguanthammarong, "A study of abrasion resistance of silica-filled natural rubber and its improvement", Mahidol University (1999).
- F. S. Conant, "Rubber technology", chapter 5. 3rd. Va Nostrand, New York (1987).
- G. Camino, S. M. Lomakin, and M. Lazzari, "Polydimethylsiloxane thermal degradation Part 2. The degradation mechanisms", Polymer, 43, 2011 (2002). https://doi.org/10.1016/S0032-3861(01)00785-6