초록
비행속력 및 받음각과 옆미끄럼각을 측정할 수 있는 플러시 대기자료측정장치를 소형의 무인항공기를 대상으로 설계/제작하였다. 동체 노즈콘 표면에 4개 압력 측정점과 5개 압력 측정점의 2가지 타입으로 플러시 압력공들을 만들었다. 플러시 압력공의 교정 압력 데이터는 전기체를 전산유체해석 코드로 계산하여 구축하였다. 교정압력 데이터로부터 받음각, 옆미끄럼각, 전압계수, 정압계수는 4차 다항식으로 표현하고, 최소자승법으로 교정계수 행렬을 구하였다. 비행시험 결과 4개 플러시 압력공 및 5개 플러시 압력공을 이용하여 예측된 비행속력, 받음각과 옆미끄럼각은 비교를 위해 장착한 5-압력공 프로브로 예측된 것과 잘 일치하였으며, 특히 4개의 압력공으로 5개 압력공과 거의 동일한 결과를 얻을 수 있었다.
A flush air data sensing system, which can predict flight speed, angle of attack, and angle of sideslip of the aircraft is designed and manufactured for a small UAV. Two kinds of flush pressure ports, four ports and five ports, are tapped at the same section of fuselage nose-cone. Calibration pressure data at flush ports are obtained through computations for the total aircraft by using Fluent code. Angle of attack, angle of sideslip, total pressure, and static pressure are represented with 4th-order polynomial function and calibration coefficient matrix is obtained using least square method with calibration pressure data. Flight test showed that flight speed, angle of attack, and sideslip angle predicted by four flush ports and five flush ports compared well with those by five-hole probe installed for data comparison. Especially four flush ports revealed nearly same results as those by five flush ports.