DOI QR코드

DOI QR Code

Performance Enhancement of a Low Speed Axial Compressor Utilizing Simultaneous Tip Injection and Casing Treatment of Groove Type

  • 투고 : 2016.02.27
  • 심사 : 2016.10.10
  • 발행 : 2017.03.30

초록

Performance of a low speed axial compressor is enhanced through a proper configuration of blade row tip injection and casing treatment of groove type. Air injectors were mounted evenly spaced upstream of the blade row within the casing groove and were all aligned parallel to the compressor axis. The groove, which covers all the blade tip chord length, extends all-round the casing circumference. Method of investigation is based on solution of the unsteady form of the Navier-Stokes equations utilizing $k-{\omega}$ SST turbulence model. Extensive parametric studies have been carried out to explore effects of injectors' flow momentums and yaw angles on compressor performance, while being run at different throttle valve setting. Emphasis has been focused on situations near to stall condition. Unsteady numerical analyses for untreated casing and no-injection case for near stall condition provided to discover two well-known criteria for spike stall inception, i.e., blade leading edge spillage and trailing edge back-flow. Final results showed that with only 6 injectors mounted axially in the casing groove and at yaw angle of 15 degrees opposite the direction of the blade row rotation, with a total mass flow rate of only 0.5% of the compressor main flow, surprisingly, the stall margin improves by 15.5%.

키워드

참고문헌

  1. Cumpsty, N. A., Compressor Aerodynamics, Longman Scientific & Technical, 1989.
  2. Inoue, M., Kuroumaru, M., Yoshida, S., Minami, T., Yamada, K. and Furukawa, M., "Effect of Tip Clearance on Stall Evolution Process in a Low-Speed Axial Compressor Stage", ASME Turbo Expo 2004: Power for Land, Sea, and Air, 2004.
  3. Storer, J. and Cumpsty, N., "Tip Leakage Flow in Axial Compressors", Journal of Turbomachinery, Vol. 113, No. 2, 1991, pp. 252-259. https://doi.org/10.1115/1.2929095
  4. Vo, H. D., Tan, C. S. and Greitzer, E. M., "Criteria for Spike Initiated Rotating Stall", Journal of Turbomachinery, Vol. 130, No. 1, 2008, pp. 011023. https://doi.org/10.1115/1.2750674
  5. Hah, C., Bergner, J. and Schiffer, H. P., "Short Length-Scale Rotating Stall Inception in a Transonic Axial Compressor: Criteria and Mechanisms", ASME Turbo Expo 2006: Power for Land, Sea, and Air, 2006.
  6. Tan, C. S., Day, I., Morris, S. and Wadia, A., "Spike-Type Compressor Stall Inception, Detection, and Control", Annual Review of Fluid Mechanics, Vol. 42, 2010, pp. 275-300. https://doi.org/10.1146/annurev-fluid-121108-145603
  7. Hathaway, M. D., "Passive Endwall Treatments for Enhancing Stability", NASA Glenn Research Center, Cleveland, OH, Paper No. NASA/TM-2007-214409, 2007.
  8. Shabbir, A. and Adamczyk, J. J., "Flow Mechanism for Stall Margin Improvement due to Circumferential Casing Grooves on Axial Compressors", Journal of Turbomachinery, Vol. 127, No. 4, 2005, pp. 708-717. https://doi.org/10.1115/1.2008970
  9. Epstein, A., Ffowcs Williams, J. and Greitzer, E., "Active Suppression of Aerodynamic Instabilities in Turbomachines", Journal of Propulsion and Power, Vol. 5, No. 2, 1989, pp. 204- 211. https://doi.org/10.2514/3.23137
  10. Suder, K. L., Hathaway, M. D., Thorp, S. A., Strazisar, A. J. and Bright, M. B., "Compressor Stability Enhancement Using Discrete Tip Injection", Journal of Turbomachinery, Vol. 123, No. 1, 2001, pp. 14-23. https://doi.org/10.1115/1.1330272
  11. Nie, C., Xu, G., Cheng, X. and Chen, J., "Micro Air Injection and its Unsteady Response in a Low-Speed Axial Compressor", ASME Turbo Expo 2002: Power for Land, Sea, and Air, 2002.
  12. Geng, S., Zhang, H., Chen, J. and Huang, W., "Unsteady Tip Clearance Flow Pattern in an Isolated Axial Compressor Rotor with Micro Tip Injection", Journal of Thermal Science, Vol. 16, No. 4, 2007, pp. 309-320. https://doi.org/10.1007/s11630-007-0309-6
  13. Beheshti, B. H., Ghorbanian, K., Farhanieh, B., Teixeira, J. A. and Ivey, P. C., "A New Design for Tip Injection in Transonic Axial Compressors", ASME Turbo Expo 2006: Power for Land, Sea, and Air, 2006.
  14. Hiller, S. J., Matzgeller, R. and Horn, W., "Stability Enhancement of a Multistage Compressor by Air Injection", Journal of Turbomachinery, Vol. 133, No. 3, 2011, pp. 031009. https://doi.org/10.1115/1.4001228
  15. Inoue, M. and Kuroumaru, M., "Structure of tip Clearance Flow in an Isolated Axial Compressor Rotor", Journal of Turbomachinery, Vol. 111, No. 3, 1989, pp. 250-256. https://doi.org/10.1115/1.3262263
  16. Inoue, M., Kuroumaru, M. and Fukuhara, M., "Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor", Journal of Engineering for Gas Turbines and Power, Vol. 108, No. 1, 1986, pp. 7-14. https://doi.org/10.1115/1.3239889
  17. Inoue, M. A. S. A. H. I. R. O., Kuroumaru, M. O. T. O. O., Iwamoto, T. A. K. A. H. I. T. O. and Ando, Y. O. U. I. C. H. I., "Detection of a Rotating Stall Precursor in Isolated Axial Flow Compressor Rotors", Journal of Turbomachinery, Vol. 113, No. 2, 1991, pp. 281-287. https://doi.org/10.1115/1.2929102
  18. Furukawa, M., Inoue, M., Saiki, K. and Yamada, K., "The Role of Tip Leakage Vortex Breakdown in Compressor Rotor Aerodynamics", Journal of Turbomachinery, Vol. 121, No. 3, 1999, pp. 469-480. DOI: 10.1115/1.2841339.

피인용 문헌

  1. Lift Force Generation of a Moving Circular Cylinder with a Strip-Plate Set Downstream in Cruciform Arrangement: Flow Field Improving Using Tip Ends vol.19, pp.3, 2018, https://doi.org/10.1007/s42405-018-0068-5