Corrosion Inhibition of Steel for Water Pipe Line by Adding a Non-Toxic Spearmint Extracts

  • Farooq, Hina (Department of Materials Science and Engineering, Seoul National University of Science and Technology) ;
  • Kim, Jae-Yeon (Program of Materials Science & Engineering, Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology) ;
  • Lee, Do-Il (Department of Materials Science and Engineering, Seoul National University of Science and Technology) ;
  • Byeon, Jai-Won (Department of Materials Science and Engineering, Seoul National University of Science and Technology)
  • 투고 : 2017.04.21
  • 심사 : 2017.06.23
  • 발행 : 2017.06.25

초록

Purpose: To investigate the corrosion inhibition effect of the natural spearmint oil extracted from Mentha Spicata plants on 304 stainless steel in different concentrations of hydrochloric acid. Method: The anti-corrosive effect has been investigated in 0.5m, 1m and 2m HCl using weight loss test and electrochemical polarization method as a function of inhibitor concentration and immersion time in strong chloride environment. The surface morphology was analysed by scanning electron microscopy (SEM). Results: The corrosion rate of steel decreased and inhibition efficiency increased with the increase in inhibitor concentration. Microscopic evaluation revealed significant corrosion in the specimens immersed in uninhibited conditions. Potentiodynamic polarization test results showed an increase in corrosion potential (Ecorr) and decrease in corrosion current (icorr) value with increasing concentration of inhibitor. Conclusions: Immersion of steel in higher concentration of inhibitor resulted in greater surface coverage value and hence lesser number of surface corrosion sites/pores were formed; thus lowering the corrosion rate.

키워드

참고문헌

  1. Tuthill , A. H. and Avery, R. E. (1993). "Corrosion behaviour of stainless steel and high alloy weldments in aggressive oxidizing environments". Supplements to the Welding Journal, February 1993.
  2. Al-Otaibi, M. S., Al-Mayouf, A. M., Khan, M., Mousa, A. A., Al-Mazroa, S. A. and Alkhathlan, H. Z. (2012). "Corrosion inhibitory action of some plant extracts on the corrosion of mild steel in acidic media". Arabian Journal of Chemistry, pp. 1-7.
  3. Obot, I. B., Obi-Egbedi, N. O., and Umoren, S. A. (2009). "Antifungal drugs as corrosion inhibitors for aluminium in 0.1m HCl," Corrosion Science, Vol. 51, No. 8, pp. 1868-1875. https://doi.org/10.1016/j.corsci.2009.05.017
  4. Fouda, A. S. and Ellithy, A. S. (2009). "Inhibition effect of 4-phenylthiazole derivatives on corrosion of 304 L stainless steel in HCl solution". Corrosion Science. 51, pp. 868-875. https://doi.org/10.1016/j.corsci.2009.01.011
  5. Dammisse, R. A., Hoof, L. V. and Vlietinck, A. J. (1986). "Structural analysis of phenolicglucosides from salicaceae by NMR spectroscopy". Phytochemistry 25, pp. 1201-1204. https://doi.org/10.1016/S0031-9422(00)81580-0
  6. Hina Farooq (2016). "Evaluation of corrosion behavior of indium tin oxide film and corrosion inhibition characteristics of spearmint oil". Master Thesis, Seoul National University of Science & Technology, Korea.
  7. Nasrin Sultani (2012). "Green Approach towards corrosion inhibition of 304 Stainless Steel in hydrochloric acid solution by the extracts of Salvia Officinalis leaves". Corrosion Science, Sep 2012.
  8. Hussin, H. M. and Kassim, M. J. (2011). "Corrosion inhibition of Uncariagambir on steel in 1M HCl solution". Mater. Chem., Phys., 125, pp. 461-468. https://doi.org/10.1016/j.matchemphys.2010.10.032
  9. Okafor, P. C. (2008). "Inhibitory action of Phyllanthusamarus on mild steel in HCl and H2SO4 solution". Corrosion Sci., 50, pp. 2310-2317. https://doi.org/10.1016/j.corsci.2008.05.009
  10. Satapathy, A. K., Gunasekaran, G., Amit, S. C. and Rodrigue, P. V. (2009). "Corrosion inhibition by Justicia gendarussa plant extract in hydrochloric acid solution". Corrosion Sci., 51, pp. 2848-2856. https://doi.org/10.1016/j.corsci.2009.08.016