Journal of Applied Reliability (한국신뢰성학회지:신뢰성응용연구)

The Korean Reliability Society (한국신뢰성학회)
권호 표지

A Study on the Criticality Analysis using Correlation Coefficient in Reliability Centered Maintenance

RCM에서 상관관계 계수를 이용한 치명도 분석에 관한 연구

  • Received : 2016.11.28
  • Accepted : 2017.01.24
  • Published : 2017.03.25
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: The occurrence ranks of failure modes can come from the real failure but the severity ranks of failure modes require a highly subjective point of view of users. The severity ranks have to find more objective and scientific values. Methods: We found the optimal values by using the correlation analysis between failure mode effects and the criticality number like RPN (Risk Priority Number) in RCM. Result: This paper shows the result that verified whether the weighted values on each failure effect in criticality number calculation is suitable to the actual failures or not. To get the verification, it used the 5 year data and correlation analysis. Based on the analyzed result, We proposed the more suitable values. Conclusion: This correlation analysis approach can provide guidance of RCM analysis across many industries and situations.

Keywords

References

  1. MIL-STD-1629A (1980). "Procedure for Performing a Failure Mode, Effect and Criticality Analysis". Department of Defense.
  2. MIL-STD-2173(AS) (1986). "Reliability-Centered Maintenance Requirements for NAVAL Aircraft, Weapons System and Support Equipment". Department of Defense.
  3. Headquaters, United States Department of the Army (2013). "Failure Modes, Effects and Critical Analysis (FMECA) for Command, Control, Communications, Computer, Intelligence, Surveillance, and Reconnaissance Facilities".
  4. Kim, H. Y. (2014). "A Study on Improvement of Reliability in the Operation of Urban Rail System Based on Burn-in and FMECA", PHD thesis, Kyungil University, pp. 7-11, 51-52.
  5. Park, B. N., Joo, H. J., Lee, C. H., and Lim, S. S. (2009). "A Study on FMEA for Railway Vehicle". Spring Conference of the Korean Society for Railway, pp. 162-168.
  6. Kim, H. Y. and Lee, J. C. (2012). "A Case Study on Improving for Operating ATC/ATO System and Driving Environment Using FMECA". Journal of the Korean Society for Railway, Vol. 15, No 6, pp. 550-557. https://doi.org/10.7782/JKSR.2012.15.6.550
  7. Park, B. N., Joo, H. J., Lee, C. H., and Lim, S. S. (2008). "A Study on Implementation of RCM for Railway Vehicle". Autumn Conference of the Korean Society for Railway, pp. 1487-1493.
  8. Lee, C. H., Song, M. O., Park, B. N., and Lee, J. M. (2010), "Procedure for Maintenance Improvement by RCM Criticality Analysis". Spring Conference of the Korean Society for Railway, pp. 2209-2214.
  9. Kim, K. W. and Shin, K. S. (2013). "A Study on the Application Reliability Centered Maintenance of Aircraft Structure based on the Risk Assessment". Journal of the Aviation Management Society of Korea, Vol. 11, No. 1, pp. 61-74.
  10. Yu, Y. H. and Lee, N. Y. (2013). "A Study on Reliability Centered Rolling Stock Maintenance Methods". Journal of the Korean Society for Railway, Vol. 16, No. 3, pp. 183-188. https://doi.org/10.7782/JKSR.2013.16.3.183
  11. Roh, B. T. and Chung. K. W. (2015). "Study on Improvement of Reliability for Passenger Service Equipment". Spring Conference of the Korean Society for Railway, pp. 1199-1204.
  12. Kim, S. Y., Yun, W. Y., and Kim H. K. (2007). "Reestablishment of RPN Evaluation Method in FMEA Procedure for Motors in Household Appliances". Journal of the Korean Society for Quality Management, Vol. 35, No. 1, pp. 1-9.
  13. Lee, Y. S., Kwon, K. R., Kim, J. O., and Kim, H. C. (2009). "Estimation for Failure Rate of Railway Power Facility and Determination of Maintenance Priority Order using Fuzzy Theory and Expert System". Spring Conference of the Korean Society for Railway, pp. 495-504.
  14. Lim, M. H. (2011). "Reliability allocation method considering cost and failure criticality". Master thesis, Konkuk University, pp. 34-35.