DOI QR코드

DOI QR Code

A physically consistent stress-strain model for actively confined concrete

  • Shahbeyk, Sharif (Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Jalal Ale Ahmad Highway) ;
  • Moghaddam, Mahshid Z. (Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Jalal Ale Ahmad Highway) ;
  • Safarnejad, Mohammad (Faculty of Civil and Environmental Engineering, Tarbiat Modares University, Jalal Ale Ahmad Highway)
  • Received : 2016.06.21
  • Accepted : 2017.03.23
  • Published : 2017.07.25

Abstract

With a special attention to the different stages of a typical loading path travelled in a fluid confined concrete test, this paper introduces a physically consistent model for the stress-strain curve of actively confined normal-strength concrete in the axial direction. The model comprises of the five elements of: (1) a criterion for the peak or failure strength, (2) an equation for the peak strain, (3) a backbone hydrostatic curve, (4) a transient hardening curve linking the point of departure from the hydrostatic curve to the failure point, and finally (5) a set of formulas for the post-peak region. Alongside, relevant details and shortcomings of existing models will be discussed in each part. Finally, the accuracy and efficiency of the proposed model have been verified in a set of simulations which compare well with the experimental results from the literature.

Keywords

References

  1. ACI 318-11 (2011), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  2. Albanesi, T., Nuti, C. and Vanzi, I. (2007), "Closed form constitutive relationship for concrete filled FRP tubes under compression", Constr. Build. Mater., 21(2), 409-427. https://doi.org/10.1016/j.conbuildmat.2005.08.004
  3. Ansari, F. and Li, Q. (1998), "High-strength concrete subjected to triaxial compression", ACI Mater. J., 95(6), 747-755.
  4. Attard, M.M. and Setunge, S. (1996), "Stress-strain relationship of confined and unconfined concrete", ACI Mater. J., 93(5), 432-442.
  5. Balmer, G.G. (1949), Shearing Strength of Concrete under High Triaxial Stress-Computation of Mohr's Envelope as a Curve, Technical Report No. SP-23, Structure Research Laboratory, Denver, Colorado, U.S.A.
  6. Binici, B. (2005), "An analytical model for stress-strain behavior of confined concrete", Engineering Structures, 27(7), 1040-1051. https://doi.org/10.1016/j.engstruct.2005.03.002
  7. Caggiano, A. (2007), "Application of some classic constitutive theories to the numerical simulation of the behavior of plain concrete", M.S. Dissertation, University of Salerno, Salerno, Italy.
  8. Candappa, D.C., Sanjayan, J.G. and Setunge, S. (2001), "Complete triaxial stress-strain curves of high-strength concrete", ASCE J. Mater. Civil Eng., 13(3), 209-215. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:3(209)
  9. Chen, W.F. and Han, D.J. (1988), Plasticity for Structural Engineers, Springer-Verlag, New York, U.S.A.
  10. Chinn, J. and Zimmerman R.M. (1965), "Behavior of plain concrete under various high triaxial compression loading conditions", Technical Report No. WL-TR-64-163, Air Force Weapons Laboratory, New Mexico.
  11. Ding, F., Tan, L., Liu, X. and Wang, L. (2017), "Behavior of circular thin-walled steel tube confined concrete stub columns", Steel Compos. Struct., 23(2), 229-238. https://doi.org/10.12989/scs.2017.23.2.229
  12. Dupray, F., Malecot, Y., Daudeville, L. and Buzaud, E. (2009), "A mesoscopic model for the behaviour of concrete under high confinement", J. Numer. Analy. Meth. Geomech., 33(11), 1407-1423. https://doi.org/10.1002/nag.771
  13. Fam, A.Z. and Rizkalla, S.H. (2001) "Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes", ACI Struct. J., 9(4), 451-461.
  14. Gabet, T., Malecot, Y. and Daudeville, L. (2008), "Triaxial behavior of concrete under high stresses: Influence of the loading path on compaction and limit states", Cement Concrete Res., 38(3), 403-412. https://doi.org/10.1016/j.cemconres.2007.09.029
  15. Gabet, T., Vu, X.H., Malecot, Y. and Daudeville, L. (2006), "A new experimental technique for the analysis of concrete under high triaxial loading", J. De Phys. IV, 134, 635-640.
  16. Ghorbi, E., Soltani, M. and Maekawa, K. (2013), "Development of a compressive constitutive model for FRP-confined concrete elements", Compos. Part B: Eng., 45(1), 504-517. https://doi.org/10.1016/j.compositesb.2012.07.014
  17. Girgin, Z.C., Anoglu, N. and Anoglu, E. (2007), "Evaluation of strength criteria for very-high-strength concretes under triaxial compression" ACI Struct. J., 104(3), 277-283.
  18. Green, S.I. and Swanson, S.R. (1973), Static Constitutive Relations for Concrete, Report No. AFWL-TR-72-2, Air Force Weapons Lab, Kirtland Air Force Base, Albuquerque, New Mexico.
  19. Hansen, T.C. (1995), Triaxial Tests with Concrete and Cement Paste, Report No. 319, Technical University of Denmark, Denmark.
  20. Harries, K.A. and Kharel, G. (2002), "Behavior and modeling of concrete subject to variable confining pressure", ACI Mater. J., 99(2), 180-189.
  21. Hoek, E. and Brown, E.T. (1980), "Empirical strength criterion for rock masses", ASCE J. Geotech. Eng., 106(9), 1013-1035.
  22. Hsieh, S.S., Ting, E.C. and Chen, W.F. (1982), "A plasticityfracture model for concrete", J. Sol. Struct., 18(3), 181-197. https://doi.org/10.1016/0020-7683(82)90001-4
  23. Hurlbut, B. (1985), "Experimental and computational investigation of strain-softening in concrete", M.S. Dissertation, University of Colorado, U.S.A.
  24. Imran, I. and Pantazopoulou, S.J. (1996), "Experimental study of plain concrete under triaxial stress", ACI Mater. J., 93(6), 589-60.
  25. Jiang, T. and Teng, J.G. (2007), "Analysis-oriented stress-strain models for FRP-confined concrete", Eng. Struct., 29(11), 2968-2986. https://doi.org/10.1016/j.engstruct.2007.01.010
  26. Kotsovos, M.D. and Newman, J.B. (1978), "Generalized stressstrain relations for concrete", ASCE J. Eng. Mech., 104(4), 845-856.
  27. Lahlou, K., Aitcin, P.C. and Chaallal, O. (1992), "Behaviour of high-strength concrete under confined stresses", Cement Concrete Compos., 14(3), 185-193. https://doi.org/10.1016/0958-9465(92)90012-K
  28. Laine, D.P. (2004), "Effect of axial preloads on confined concrete", M.S. Dissertation, University of Toronto, Canada.
  29. Leon, A. (1935), "Uber die scherfestigkeit des betons", Beton Eisen, 34(8).
  30. Li, Q. and Ansari, F. (2000), "High-strength concrete in triaxial compression by different sizes of specimens", ACI Mater. J., 97(6), 684-689.
  31. Lu, X. and Hsu, C.T.T. (2006), "Behavior of high-strength concrete with and without steel fiber reinforcement in triaxial compression", Cement Concrete Res., 36(9), 1679-1685. https://doi.org/10.1016/j.cemconres.2006.05.021
  32. Malecot, Y., Vu, X.H. and Daudeville, L. (2009), "Unconfined compressive strength is a poor indicator of the high-pressure mechanical response of concrete", DYMAT, 2, 1325-1331.
  33. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  34. Markeset, G. and Hillerborg, A. (1995), "Softening of concrete in compression-localization and size effects", Cement Concrete Res., 25(4), 702-708. https://doi.org/10.1016/0008-8846(95)00059-L
  35. Marques, S.P.C., Marques, D.C.S.C., Da Silva, J.L. and Cavalcante, M.A.A. (2004), "Model for analysis of short columns of concrete confined by fiber-reinforced polymer", ASCE J. Compos. Constr., 8(4), 332-340. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:4(332)
  36. Montuori, R., Piluso, V. and Tisi, A. (2012), "Comparative analysis and critical issues of the main constitutive laws for concrete elements confined with FRP", Compos. Part B: Eng., 43(8), 3219-3230. https://doi.org/10.1016/j.compositesb.2012.04.001
  37. Montuori, R., Piluso, V. and Tisi, A. (2013), "Ultimate behaviour of FRP wrapped sections under axial force and bending: Influence of stress-strain confinement model", Compos. Part B: Eng., 54(1), 85-96. https://doi.org/10.1016/j.compositesb.2013.04.059
  38. Ozbakkaloglu, T., Lim, J.C. and Vincent, T. (2013), "FRPconfined concrete in circular sections: Review and assessment of stress-strain models", Eng. Struct., 49, 1068-1088. https://doi.org/10.1016/j.engstruct.2012.06.010
  39. Papanikolaou, V.K. and Kappos, A.J. (2007), "Confinementsensitive plasticity constitutive model for concrete in triaxial compression", J. Sol. Struct., 44(21), 7021-7048. https://doi.org/10.1016/j.ijsolstr.2007.03.022
  40. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), A Study of the Failure of Concrete under Combined Compressive Stresses, Engineering Experimental Station Bulletin No.185, University of Illinois.
  41. Sadeghi, K. and Nouban, F. (2017), "Behavior modeling and damage quantification of confined concrete under cyclic loading", Struct. Eng. Mech., 61(5), 625-635. https://doi.org/10.12989/sem.2017.61.5.625
  42. Samani, A.K. and Attard, M.M. (2012), "Stress-strain model for uniaxial and confined concrete under compression", Eng. Struct., 41, 335-349. https://doi.org/10.1016/j.engstruct.2012.03.027
  43. Samdani, S. and Sheikh, S.A. (2005), "Analytical study of FRP confined concrete columns", Proceedings of the 4th Conference on Our World in Concrete and Structures, Seoul, South Korea.
  44. Setunge, S., Attard, M.M. and Darvall, P.P. (1993), "Ultimate strength of confined very high-strength concretes", ACI Struct. J., 90(6), 632-641.
  45. Sfer, D., Carol, I. and Etse, G. (2002), "Study of the behavior of concrete under triaxial compression" ASCE J. Eng. Mech., 128(2), 156-163. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:2(156)
  46. Shin, M. and Andrawes, B. (2010), "Experimental investigation of actively confined concrete using shape memory alloys", Eng. Struct., 32(3), 656-664. https://doi.org/10.1016/j.engstruct.2009.11.012
  47. Singh, M., Raj, A. and Singh, B. (2011), "Modified mohr-coulomb criterion for non-linear triaxial and polyaxial strength of intact rocks", J. Rock Mech. Min. Sci., 48(4), 546-555. https://doi.org/10.1016/j.ijrmms.2011.02.004
  48. Smith, S.S., Willam, K.J., Gerstle, K.H. and Sture, S. (1989), "Concrete over the top, or: Is there life after peak?", ACI Mater. J., 86(5), 491-497.
  49. Spoelstra, M.R. and Monti, G. (1999), "FRP-confined concrete model", ASCE J. Compos. Constr., 3(3), 143-150. https://doi.org/10.1061/(ASCE)1090-0268(1999)3:3(143)
  50. Tan, T.H. (2005), "Effects of triaxial stress on concrete", Proceedings of the 30th Conference on Our World in Concrete and Structures, Singapore, August.
  51. Teng, J.G., Huang, Y.L., Lam, L. and Ye, L.P. (2007), "Theoretical model for fiber reinforced polymer-confined concrete", ASCE J. Compos. Constr., 11(2), 201-210. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(201)
  52. Vonk, R. (1992), "Softening of concrete loaded in compression", Ph. D. Dissertation, Eindhoven University of Technology, the Netherlands.
  53. Vu, X.H., Malecot, Y., Daudeville, L. and Buzaud, E. (2009), "Effect of the water/cement ratio on concrete behavior under extreme loading", J. Numer. Analy. Meth. Geomech., 33(17), 1867-1888. https://doi.org/10.1002/nag.796
  54. Willam, K.J. and Warnke, E.P. (1995), "Constitutive model for the triaxial behavior of concrete", Proceedings of the 19th Seminar on Concrete Structure Subjected to Triaxial Stresses, Bergamo, Italy.
  55. Xiao, Q.G., Teng, J.G. and Yu, T. (2010), "Behavior and modeling of confined high-strength concrete. ASCE J. Compos. Constr., 14(3), 249-259. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000070
  56. Xie, J., Elwi, A.E. and MacGregor, J.G. (1995), "Mechanical properties of three high-strength concretes containing silica fume", ACI Mater. J., 92(2), 135-145.