DOI QR코드

DOI QR Code

Concrete compressive strength identification by impact-echo method

  • Hung, Chi-Che (Institute of Nuclear Energy Research, Atomic Energy Council) ;
  • Lin, Wei-Ting (Department of Civil Engineering, National ILan University) ;
  • Cheng, An (Department of Civil Engineering, National ILan University) ;
  • Pai, Kuang-Chih (Institute of Nuclear Energy Research, Atomic Energy Council)
  • 투고 : 2016.06.17
  • 심사 : 2017.03.21
  • 발행 : 2017.07.25

초록

A clear correlation exists between the compressive strength and elastic modulus of concrete. Unfortunately, determining the static elastic modulus requires destructive methods and determining the dynamic elastic modulus is greatly complicated by the shape and size of the specimens. This paper reports on a novel approach to the prediction of compressive strength in concrete cylinders using numerical calculations in conjunction with the impact-echo method. This non-destructive technique involves obtaining the speeds of P-waves and S-waves using correction factors through numerical calculation based on frequencies measured using the impact-echo method. This approach makes it possible to calculate the dynamic elastic modulus with relative ease, thereby enabling the prediction of compressive strength. Experiment results demonstrate the speed, convenience, and efficacy of the proposed method.

키워드

참고문헌

  1. ACI Committee 318 (1996), Building Code Requirements for Structural Concrete, ACI Manual of Concrete Practice Part 3: Use of Concrete in Buildings-Design, Specifications, and Related Topics, Detroit, Michigan, U.S.A.
  2. ACI Committee 363 (1984), "State-of-art-report on high strength concrete", ACI Mater. J., 81(4), 364-411.
  3. Alani, A.M., Aboutalebi, M. and Kilic, G. (2013), "Applications of ground penetrating radar (GPR) in bridge deck monitoring and assessment", J. Appl. Geophys., 97, 45-54. https://doi.org/10.1016/j.jappgeo.2013.04.009
  4. Alwash, M., Sbartai, Z.M. and Breysse, D. (2016), "Nondestructive assessment of both mean strength and variability of concrete: A new bi-objective approach", Constr. Build. Mater., 113, 880-889. https://doi.org/10.1016/j.conbuildmat.2016.03.120
  5. Birgul, R. (2009), "Hilbert transformation of waveforms to determine shear wave velocity in concrete", Cement Concrete Res., 39(8), 696-700. https://doi.org/10.1016/j.cemconres.2009.05.003
  6. British Standards Institution (1972), The Structural Use of Concrete. Part 1: Design, Materials and Workmanship, London, U.K.
  7. Carino, N.J. (2013), "Training: Often the missing link in using NDT methods", Constr. Build. Mater., 38, 1316-1329. https://doi.org/10.1016/j.conbuildmat.2011.03.060
  8. Demir, F. (2005), "A new way of prediction elastic modulus of normal and high strength concrete-fuzzy logic", Cement Concrete Res., 35(8), 1531-1538. https://doi.org/10.1016/j.cemconres.2005.01.001
  9. Demir, F. (2008), "Prediction of elastic modulus of normal and high strength concrete by artificial neural networks", Constr. Build. Mater., 22(7), 1428-1435. https://doi.org/10.1016/j.conbuildmat.2007.04.004
  10. Demir, F. and Korkmaz, K.A. (2008), "Prediction of lower and upper bounds of elastic modulus of high strength concrete", Constr. Build. Mater., 22(7), 1385-1393. https://doi.org/10.1016/j.conbuildmat.2007.04.012
  11. Gajzler, M. (2016), "Supporting of repairs processes of concrete industrial floors", Eng. Struct. Technol., 8(1), 8-14. https://doi.org/10.3846/2029882X.2016.1171954
  12. Garbacz, A. (2015), "Application of stress based NDT methods for concrete repair bond quality control", Bull. Pol. Acad. Sci. Technol. Sci., 63(1), 77-85.
  13. Gesoglu, M., Guneyisi, E. and Ozturan, T. (2002), "Effects of end conditions on compressive strength and static elastic modulus of very high strength concrete", Cement Concrete Res., 32(10), 1545-1550. https://doi.org/10.1016/S0008-8846(02)00826-8
  14. Han, S.H. and Kim, J.K. (2004), "Effect of temperature and age on the relationship between dynamic and static elastic modulus of concrete", Cement Concrte Res., 34(7), 1219-1227. https://doi.org/10.1016/j.cemconres.2003.12.011
  15. Hansen, T.C. (1986), "Recycled aggregate and recycled aggregate concrete", Mater. Struct., 19(3), 201-204. https://doi.org/10.1007/BF02472036
  16. Hassan, A.M.T. and Jones, S.W. (2012), "Non-destructive testing of ultra high performance fibre reinforced concrete (UHPFRC): A feasibility study for using ultrasonic and resonant frequency testing techniques", Constr. Build. Mater., 35, 361-367. https://doi.org/10.1016/j.conbuildmat.2012.04.047
  17. Hola, J. and Schabowicz, K. (2010), "State-of-the-art nondestructive methods for diagnostic testing of building structures-anticipated development trends", Arch. Civil Mech. Eng., 10(3), 5-18. https://doi.org/10.1016/S1644-9665(12)60133-2
  18. Hola, J., Sadowski, L. and Schabowicz, K. (2011), "Nondestructive identification of delaminations in concrete floor toppings with acoustic methods", Automat. Constr., 20(7), 799-807. https://doi.org/10.1016/j.autcon.2011.02.002
  19. KrauB, M. and Hariri, K. (2006), "Determination of initial degree of hydration for improvement of early-age properties of concrete using ultrasonic wave propagation", Cement Concrete Compos., 28(4), 299-306. https://doi.org/10.1016/j.cemconcomp.2006.02.007
  20. Malhotra, V.M. and Carino, N.J. (2003), Handbook on Nondestructive Testing of Concrete, CRC Press, New York, U.S.A.
  21. Panesar, D.K. and Shindman, B. (2011), "Elastic properties of self-consolidating concrete", Constr. Build. Mater., 25(8), 3334-3344. https://doi.org/10.1016/j.conbuildmat.2011.03.024
  22. Pucinotti, R. (2015), "Reinforced concrete structure: Nondestructive in situ strength assessment of concrete", Constrs Build. Mater., 75, 331-341. https://doi.org/10.1016/j.conbuildmat.2014.11.023
  23. Qixian, L. and Bungey, J.H. (1996), "Using compression wave ultrasonic transducers to measure the velocity of surface waves and hence determine dynamic modulus of elasticity for concrete", Constr. Build. Mater., 10(4), 237-242. https://doi.org/10.1016/0950-0618(96)00003-7
  24. Rehman, S.K.U., Ibrahim, Z., Memon, S.A. and Jameel, M. (2016), "Nondestructive test methods for concrete bridges: A review", Constr. Build. Mater., 107, 58-86. https://doi.org/10.1016/j.conbuildmat.2015.12.011
  25. Rojas-Henao, L., Fernandez-Gomez, J. and Lopez-Agui, J. (2012), "Rebound hammer, pulse velocity and core tests in selfconsolidating concrete", ACI Mater. J., 109(2), 235-243.
  26. Ross, M.S. (2009), Introduction to Probability and Statistics for Engineers and Scientists, 4th Edition, Elsevier Inc., U.S.A.
  27. Sadowski, L., Hola, J. and Czarnecki, S. (2016), "Non-destructive neural identification of the bond between concrete layers in existing elements", Constr. Build. Mater., 127, 49-58. https://doi.org/10.1016/j.conbuildmat.2016.09.146
  28. Saint-Pierre, F., Philibert, A., Giroux, B. and Rivard, P. (2016), "Concrete quality designation based on ultrasonic pulse velocity", Constr. Build. Mater., 125, 1022-1027. https://doi.org/10.1016/j.conbuildmat.2016.08.158
  29. Sansalone, M. (1997), "Impact-echo: The complete story", ACI Struct. J., 94(6), 777-786.
  30. Shkolnik, I.E. (2005), "Effect of nonlinear response of concrete on its elastic modulus and strength", Cement Concrete Compos., 27(7-8), 747-757. https://doi.org/10.1016/j.cemconcomp.2004.12.006
  31. Tayfur, G., Erdem, T.K. and Kirca, O. (2014), "Strength prediction of high-strength concrete by fuzzy logic and artificial neural networks", J. Mater. Civil Eng., 26(11), 040140791-040140797.
  32. Voigt, T., Sun, Z. and Shah, S.P. (2006), "Comparison of ultrasonic wave reflection method and maturity method in evaluating early-age compressive strength of mortar", Cement Concrete Compos., 28(4), 307-316. https://doi.org/10.1016/j.cemconcomp.2006.02.003
  33. Wang, J.J., Chang, T.P., Chen, B.T. and Wang, H. (2012), "Determination of Poisson's ratio of solid circular rods by impact-echo method", J. Sound Vibr., 331(5), 1059-1067. https://doi.org/10.1016/j.jsv.2011.10.030
  34. Yildirim, H. and Sengul, O. (2011), "Modulus of elasticity of substandard and normal concretes", Constr. Build. Mater., 25(4), 1645-1652. https://doi.org/10.1016/j.conbuildmat.2010.10.009
  35. Yuan, Z., Wang, L.N. and Ji, X. (2014), "Prediction of concrete compressive strength: Research on hybrid models genetic based algorithms and ANFIS", Adv. Eng. Softw., 67, 156-163. https://doi.org/10.1016/j.advengsoft.2013.09.004
  36. Zhou, F.P., Lydon, F.D. and Barr, B.I.G. (1995), "Effect of coarse aggregate on elastic modulus and compressive strength of high performance concrete", Cement Concrete Res., 25(1), 177-186. https://doi.org/10.1016/0008-8846(94)00125-I
  37. Zhou, J., Ye, G. and Breugel, K. (2016), "Cement hydration and microstructure in concrete repairs with cementitious repair materials", Constr. Build. Mater., 112, 765-772. https://doi.org/10.1016/j.conbuildmat.2016.02.203
  38. Zhou, Q., Wang, F. and Zhu, F. (2016), "Estimation of compressive strength of hollow concrete masonry prisms using artificial neural networks and adaptive neuro-fuzzy inference systems", Constr. Build. Mater., 127, 417-426.
  39. Zhou, Y., Gao, J., Sun, Z. and Qu, W. (2015), "A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete", Constr. Build. Mater., 98, 137-145. https://doi.org/10.1016/j.conbuildmat.2015.08.110

피인용 문헌

  1. Size Estimation of Concrete Structures Using the Impact Echo Method vol.22, pp.1, 2017, https://doi.org/10.5659/aikar.2020.22.1.23