DOI QR코드

DOI QR Code

Experimental performance of Y-shaped eccentrically braced frames fabricated with high strength steel

  • Lian, Ming (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Su, Mingzhou (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Guo, Yan (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2016.11.03
  • 심사 : 2017.05.05
  • 발행 : 2017.07.20

초록

In Y-shaped eccentrically braced frame fabricated with high strength steel (Y-HSS-EBF), link uses conventional steel while other structural members use high strength steel. Cyclic test for a 1:2 length scaled one-bay and one-story Y-HSS-EBF specimen and shake table test for a 1:2 length scaled three-story Y-HSS-EBF specimen were carried out to research the seismic performance of Y-HSS-EBF. These include the failure mode, load-bearing capacity, ductility, energy dissipation capacity, dynamic properties, acceleration responses, displacement responses, and dynamic strain responses. The test results indicated that the one-bay and one-story Y-HSS-EBF specimen had good load-bearing capacity and ductility capacity. The three-story specimen cumulative structural damage and deformation increased, while its stiffness decreased. There was no plastic deformation observed in the braces, beams, or columns in the three-story Y-HSS-EBF specimen, and there was no danger of collapse during the seismic loads. The designed shear link dissipated the energy via shear deformation during the seismic loads. When the specimen was fractured, the maximum link plastic rotation angle was higher than 0.08 rad for the shear link in AISC341-10. The Y-HSS-EBF is a safe dual system with reliable hysteretic behaviors and seismic performance.

키워드

참고문헌

  1. AISC 341-10 (2010), Seismic Provisions for Structural Steel Buildings; Chicago, IL, USA.
  2. Ban, H.Y., Shi, G., Liu, Z., Shi, Y.J., Wang, Y.Q., Xing, H.J. and Li, M.H. (2011), "Experimental study on overall buckling behavior of Q420 high strength equal angle members under axial compression", J. Build. Struct., 32(2), 60-67.
  3. Barbosa, A.R., Link, T. and Trejo, D. (2016), "Seismic performance of high-strength steel RC bridge columns", J. Bridge Eng., 21(2), 04015044. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000769
  4. Bosco, M. and Rossi, P.P. (2009), "Seismic behaviour of eccentrically braced frames", Eng. Struct., 31(3), 664-674. https://doi.org/10.1016/j.engstruct.2008.11.002
  5. Chen, A.H., Xu, J.Q., Li, R. and Li, H.L. (2012), "Corrosion resistance of high performance weathering steel for bridge building applications", J. Iron Steel Res., Int., 19(6), 59-63.
  6. Dusicka, P., Itani, A. and Buckle, I. (2010), "Cyclic behavior of shear links of various grades of plate steel", J. Struct. Eng., 136(4), 370-378. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000131
  7. GB50011-2010 (2010), Code for seismic design of buildings; Beijing, China.
  8. Ioan, A., Stratan, A. and Dubina, D. (2013), "Numerical simulation of bolted links removal in eccentrically braced frames", Pollack Periodica, 8(1), 15-26. https://doi.org/10.1556/Pollack.8.2013.1.2
  9. Ioan, A., Stratan, A., Dubina, D., Poljansek, M., Molina, M.J., Taucer, F., Pegon, P. and Sabau, G. (2016), "Experimental validation of re-centring capability of eccentrically braced frames with removable links", Eng. Struct., 113, 335-346. https://doi.org/10.1016/j.engstruct.2016.01.038
  10. JGJ 99-98 (1998), Technical specification for steel structure of tall buildings; Beijing, China.
  11. Li, Z.X. (2014), Theory and technique of engineering structure experiments; Tianjin, China.
  12. Lian, M. and Su, M.Z. (2015), "Seismic performance of eccentrically braced frames with high strength steel combination", Steel Compos. Struct., Int. J., 18(6), 1517-1539. https://doi.org/10.12989/scs.2015.18.6.1517
  13. Lin, K.C., Lin, C.C.J., Chen, J.Y. and Chang, H.Y. (2010), "Seismic reliability of steel framed buildings", Struct. Safety, 32(3), 174-182. https://doi.org/10.1016/j.strusafe.2009.11.001
  14. Ma, J.L., Chan, T.M. and Young, B. (2016), "Experimental investigation of cold-formed high strength steel tubular beams", Eng. Struct., 126, 200-209. https://doi.org/10.1016/j.engstruct.2016.07.027
  15. Mansour, N., Christopoulos, C. and Tremblay, R. (2014), "Experimental Validation of Replaceable Shear Links for Eccentrically Braced Steel Frames", J. Struct. Eng., 137(10), 1141-1152.
  16. Pocock, G. (2006), "High strength steel use in Australia, Japan and the US", The Struct. Engr., 84(21), 27-30.
  17. Rasmussen, K.J.R. and Hancock, G.J. (1992), "Plate slenderness limits for high strength steel sections", J. Constr. Steel Res., 23(1), 73-96. https://doi.org/10.1016/0143-974X(92)90037-F
  18. Rasmussen, K.J.R. and Hancock, G.J. (1995), "Tests of high strength steel columns", J. Constr. Steel Res., 34(1), 27-52. https://doi.org/10.1016/0143-974X(95)97296-A
  19. Shayanfar, M.A., Barkhordari, M.A. and Rezaeian, A.R. (2012), "Experimental study of cyclic behavior of composite vertical shear link in eccentrically braced frames", Steel Compos. Struct., Int. J., 12(1), 13-29. https://doi.org/10.12989/scs.2012.12.1.013
  20. Shim, C.S., Whang, J.W., Chung, C.H. and Lee, P.G. (2011), "Design of double composite bridges using high-strength steel", Procedia Eng., 14(12), 1825-1829. https://doi.org/10.1016/j.proeng.2011.07.229
  21. Speicher, M.S. and Harris III, J.L. (2016), "Collapse prevention seismic performance assessment of new eccentrically braced frames using ASCE 41", Eng. Struct., 117, 344-357. https://doi.org/10.1016/j.engstruct.2016.02.018
  22. Su, M.Z. and Li, Y.L. (2014), "Study on structural behavior factor of high strength steel composite Y-type eccentrically braced frame based on incremental dynamic analysis", J. Xi'an Univ. Architect. Technol., 46(5), 635-642.
  23. Tokgoz, S., Dundar, C. and Tanrikulu, A.K. (2012), "Experimental behaviour of steel fiber high strength reinforced concrete and composite columns", J. Constr. Steel Res., 74(7), 98-107. https://doi.org/10.1016/j.jcsr.2012.02.017
  24. Vander, V.G.J., De, B.J. and Wardenier, J. (1990), "Low cycle fatigue of tubular T- and X-joints", Proceedings of the 3rd International Symposium on Tubular Structures, Lappeenranta, Finland, September, pp. 605-616.
  25. Wang, B.W., Li, G.Q., Cui, W. and Chen, S.W. (2014), "Seismic behavior of high strength steel welded beam-column members", J. Constr. Steel Res., 102(11), 245-255. https://doi.org/10.1016/j.jcsr.2014.07.015
  26. Wang, F., Su, M.Z., Hong, M., Guo, Y. and Li, S. (2016), "Cyclic behaviour of y-shaped eccentrically braced frames fabricated with high-strength steel composite", J. Constr. Steel Res., 120(2), 176-187. https://doi.org/10.1016/j.jcsr.2016.01.007

피인용 문헌

  1. Seismic performance of high-strength steel framed-tube structures with bolted web-connected replaceable shear links vol.37, pp.3, 2017, https://doi.org/10.12989/scs.2020.37.3.323
  2. Mechanical property test and analysis on the main body frame structure of electrical dust precipitator vol.26, pp.2, 2017, https://doi.org/10.1590/s1517-707620210002.1290
  3. Numerical investigation on the flexural links of eccentrically braced frames with web openings vol.39, pp.2, 2017, https://doi.org/10.12989/scs.2021.39.2.171
  4. Energy factor of high-strength-steel frames with energy dissipation bays under repeated near-field earthquakes vol.40, pp.3, 2017, https://doi.org/10.12989/scs.2021.40.3.369
  5. Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275