DOI QR코드

DOI QR Code

Design and construction of shaft for rock caverns in Singapore

  • Zhang, Xiao-Ping (The Key Laboratory of Safety for Geotechnical and Structural Engineering of Hubei Province, School of Civil Engineering, Wuhan University) ;
  • Lu, Ming (SINTEF Rock Engineering) ;
  • Mao, Dawei (Hydro China Zhongnan Engineering Corporation) ;
  • Zhao, Zhiye (School of Civil and Environmental Engineering, Nanyang Technological University) ;
  • Hao, Liu (China Railway Siyuan Survey and Design Group Co., Ltd)
  • 투고 : 2014.12.15
  • 심사 : 2017.03.04
  • 발행 : 2017.07.25

초록

Access shaft is of critical importance to the construction and operation of underground rock caverns. It usually has a relatively large cross-section and penetrates through fill materials, soil layers, and weathered rocks before reaching the caverns excavated in solid bedrock. In this paper, the design and construction of vertical shafts are reviewed in terms of diameter, depth, geological conditions, and support structure. Three shaft alternatives, namely alternative I: vertical shaft with spiral roads, alternative II: upper shaft with spiral roads & lower tunnels, alternative III: plain shaft, are proposed based on a simplified geological profile of the Jurong formation, Singapore. The advantages and limitations of the three types of shafts are discussed. The key issues relating to shaft design and construction, such as the shaft sinking, water control, support structure, are also discussed with a series of solutions provided, such as the sequential excavation, pre-grouting and diaphragm walls.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (2001), A Policy on Geometric Design of Highways and Streets; Washington, DC, USA.
  2. Antonio, E.C. and Adams, N.L. (2001), "Widening and deepening adjacent large shafts in rock", Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 149(3), 177-188.
  3. Baybura, T. (2001), "The Investigation of the Effect of the Vertical Alignment Geometry on the Lateral Change of Acceleration", Istanbul Technical University, Istanbul, Turkey.
  4. Baykal, O. (2009), Engineering Surveying-1 Design and Application of Highway and Railway Alignment Geometry, Birsen Yayinevi, Istanbul, Turkey. [In Turkish]
  5. DSD website, http://www.dsd.gov.hk/others/HATS2A/en/Images/news/Newsletter_No_2%20(final)_A.pdf
  6. Frenzel, C., Delabbio, F. and Burger, W. (2010), "Shaft boring systems for mechanical excavation of deep shafts", Proceedings of the 2nd International Symposium on Block and Sublevel Caving, Australian Centre for Geomechanics, Perth, Australia, April.
  7. Funkhouser, M., Humphries, R., Warburton, W., Daly, J. and Connor, E.O. (2004), Design and Construction of Shafts at the San Roque Project, North American Tunneling, Taylor & Francis Group, London, UK; Atlanta, GA, USA.
  8. Garshol, K.F. (2007), "Pre-excavation grouting in rock tunneling", UGC International, Division of BASF Construction Chemicals (Switzerland) Ltd.
  9. Garshol, K.F. (2013), Personal communication.
  10. Garshol, K.F. and Lacerda, L. (2007), "Watertight permanent shotcrete linings in tunneling and underground construction", Shocrete, Fall 2007, pp. 32-36.
  11. Garshol, K.F., Tam, K.W.J., Mui, W.B.S., Chau, K.M.H. and Lau, C.K.K. (2012), "Grouting techniques for deep subsea sewage tunnels in Hong Kong", Proceedings of World Tunnel Congress (WTC 2012), Bangkok, Thailand, May.
  12. Goldschneider, A.G., Amantini, E., Briand, P. and Vaskou, P. (2012), "Hydrodynamic containment principle of hydrocarbon storage caverns for phase 1 Jurong Rock Caverns", Proceedings of the 13th World Conference of ACUUS - Adv. Undergr. Space Develop., Singapore, November.
  13. Jiang, T.Y., Jing, Z.H. and Wang, J.H. (2014), "Sensitivity Analysis of Transport Machinery Configuration in Underground Cavern Group Construction", Intel. Autom. Soft Comput., 20(4), 525-534. https://doi.org/10.1080/10798587.2014.934589
  14. KILINC , A.S. and BAYBURA, T. (2012), "Determination of minimum horizontal curve radius used in the design of transportation structures, depending on the limit value of comfort criterion lateral jerk", FIG Working Week 2012 Knowing to Manage the Territory, Protect the Environment, Evaluate the Cultural Heritage, Rome, Italy.
  15. Lashgari, A., Fouladgar, M.M., Yazdani-Chamzini, A. and Skibniewski, M.J. (2011), "Using an integrated model for shaft sinking method selection", J. Civil Eng. Manage., 17(4), 569-580. https://doi.org/10.3846/13923730.2011.628687
  16. Li, Y., Chen, Y.F., Jiang, Q.H., Hu, R. and Zhou, C.B. (2014), "Performance assessment and optimization of seepage control system: A numerical case study for Kala underground powerhouse", Comput. Geotech., 55, 306-315. https://doi.org/10.1016/j.compgeo.2013.09.013
  17. NGI (2013), Using the Q-system - Rock mass classification and support design NGI; Oslo, Norway.
  18. Ocak, I. and Bilgin, N. (2010), "Comparative studies on the performance of a roadheader, impact hammer and drilling and blasting method in the excavation of metro station tunnels in Istanbul", Tunn. Undergr. Space Technol., 25(2), 181-187. https://doi.org/10.1016/j.tust.2009.11.002
  19. Pakianathan, L.J., Kwong, A.K.L., McLearie, D.D. and Ng, W.K. (2004), "Construction of HATS Stage 1 Deep Shafts in Hong Kong Special Administrative Region (SAR), China", Tunnelling and Underground Space Technology, Underground Space for Sustainable Urban Development - Proceedings of the 30th ITA-AITES World Tunnel Congress, Singapore, May.
  20. Parashar, S., Mitchell, R., Hee, M.W., Sanmuganathan, D. and Nicholson, G. (2007), "Performance monitoring of deep shafts at Changi WRP Project, Singapore", Proceedings of the 7th International Symposium on Field Measurements in Geomechanics, American Society of Civil Engineers, Boston, MA, USA, September.
  21. Puhakka, T. (1997), Underground Drilling and Loading Handbook, Tamrock Corporation, Finland.
  22. Roman, W.M., Hockenberry, A.N., Berezniak, J.N., Wilson, D.B. and Knight, M.A. (2013), "Evaluation of Grouting for Hydraulic Barriers in Rock", Environ. Eng. Geosci., 19(4), 363-375. https://doi.org/10.2113/gseegeosci.19.4.363
  23. Ryjevski, M. (2008), "Design and construction underground structures and tunnels on Jumeirah palm Island", World Tunnel Congress 2008 - Underground Facilities for Better Environment and Safety - India, Central Board of Irrigation & Power, Agra, India, September.
  24. Schofield, W. (2001), Engineering Surveying - Theory and Examination Problems for Students, Butterworth-Heinemann, Oxford, New Delhi, India.
  25. Schot, S.H. (1978), "Jerk: The time rate of change of acceleration", American Journal of Physics, 46(11), 1090-1094. https://doi.org/10.1119/1.11504
  26. Stenstad, O. (1998), "Execution of injection works", Proceedings of Post Graduate Training Course; Sponsored by the Norwegian Chartered Engineer Association and the Norwegian Rock Mechanics Group, Fagernes, Norway.
  27. Umar, F. and Yayla, N. (1997), Construction of Road, Istanbul Teknik Universitesi, Istanbul, Turkey. [In Turkish]
  28. Uren, J. and Price, W. (2006), Surveying for Engineers, Palgrave Macmillan, New York, NY, USA.
  29. Vincenza, F., Enrico, F., Piergiorgio, G. and Giordano, R. (2012), "Challenging issues in design and construction of large shafts", ITA-AITES World Tunnel Congress 2012, Bangkok, Thailand, May.
  30. Virollet, B., Gilbert, C. and Deschamps, R. (2006), "Recent advances in Large Diameter Diaphragm Wall Shafts", Proceedings of the 31st Annual Conference on Deep Foundations, Washington, DC, USA, October.
  31. Zhang, W.G. and Goh, A.T.C. (2014), "Multivariate adaptive regression splines model for reliability assessment of serviceability limit state of twin caverns", Geomech. Eng., Int. J., 7(4), 431-458. https://doi.org/10.12989/gae.2014.7.4.431
  32. Zhang, W.G. and Goh, A.T.C. (2015), "Regression models for estimating ultimate and serviceability limit states of underground rock caverns", Eng. Geol., 188, 68-76. https://doi.org/10.1016/j.enggeo.2015.01.021
  33. Zhang, Y.M., Sun, L.M. and Zhu, Z.Q. (2012), "Stress propagation of large underground cavern group under earthquake", World Earthq. Eng., 28(3), 130-134.
  34. Zhang, X.P., Liu, Q., Wu, S. and Tang, X. (2015), "Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression", Eng. Geol., 199, 74-90. https://doi.org/10.1016/j.enggeo.2015.10.007
  35. Zhang, X.P., Zhang, Q. and Wu, S. (2017), "Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates", Comput. Geotech., 83, 83-97. https://doi.org/10.1016/j.compgeo.2016.11.003
  36. Zhao, Z.Y., Zhou, Y.X. and An, X.M. (2012), "Underground technology and rock engineering program in Nanyang Technological University, Singapore", Advances in Underground Space Development - Proceedings of the 13th World Conference of ACUUS, Singapore, November, pp. 1285-1295.

피인용 문헌

  1. Evaluating the Impact of Blast-Induced Damage on the Rock Load Supported by Liner in Construction of a Deep Shaft: A Case Study of Ventilation Shaft of Micangshan Road Tunnel Project vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/9068345