Geomechanics and Engineering

  • 제13권1호
  • /
  • Pages.43-61
  • /
  • 2017
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of abutment types on highway in terms on driving comfort

  • Nam, Moon S. (Structure Research Division, Research Institute of Korea Expressway Corporation) ;
  • Park, Min-Cheol (Department of Civil Engineering, Kumoh National Institute of Technology) ;
  • Do, Jong-Nam (Structure Research Division, Research Institute of Korea Expressway Corporation)
  • 투고 : 2016.05.17
  • 심사 : 2017.02.08
  • 발행 : 2017.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

The inverted T-type abutments are generally used in highway bridges constructed in Korea. This type of abutment is used because it has greater stability, with more pile foundations embedded in the bedrock, while simultaneously providing support for lateral earth pressure and vertical loads of superstructures. However, the cross section of inverted T-type abutments is large compared with the piers, which makes them more expensive. In addition, a differential settlement between the abutment and embankment, as well as the expansion joints, causes driving discomfort. This study evaluated the driving comfort of several types of abutments to improve driving comfort on the abutment. To achieve this objective, a traditional T-type abutment and three types of candidate abutments, namely, mechanically stabilized earth wall (MSEW) abutment supported by a shallow foundation (called "true MSEW abutment"), MSEW abutment supported by piles (called "mixed MSEW abutment"), and pile bent and integral abutment with MSEW (called "MIP abutment"), were selected to consider their design and economic feasibility. Finite element analysis was performed using the design section of the candidate abutments. Subsequently, the settlements of each candidate abutment, approach slabs, and paved surfaces of the bridges were reviewed. Finally, the driving comfort on each candidate abutment was evaluated using a vehicle dynamic simulation. The true MSEW abutment demonstrated the most excellent driving comfort. However, this abutment can cause problems with respect to serviceability and maintenance due to excessive settlements. After our overall review, we determined that the mixed MSEW and the MIP abutments are the most appropriate abutment types to improve driving comfort by taking the highway conditions in Korea into consideration.

키워드

참고문헌

  1. AASHTO (2002), Standard Specifications for Highway Bridges; 17th Edition.
  2. Abdelouhab, A., Dias, D. and Freitag, N. (2011), "Numerical analysis of the behaviour of mechanically stabilized earth walls reinforced with different types of strips", Geotext. Geomembr., 29(2), 116-129. https://doi.org/10.1016/j.geotexmem.2010.10.011
  3. Arsoy, S., Barker, R.M. and Duncan, J.M. (2002), "Experimental and analytical investigations of piles and abutments of integral bridges", Virginia Department of Transportation, pp. 1-55.
  4. Briaud, J.L., James, R.W. and Hoffman, S.B. (1997), "Settlement of bridge approaches: (the bump at the end of the bridge); NCHRP Synthesis 234", Transportation Research Board, Washington, D.C., USA, pp. 1-81.
  5. Chung, M.-K., Lee, S.-H., Lee, J.-H., Kwak, K.-S. and Kim, S.-R. (2010), "Reinforcement Effect of Steel-Concrete Composite Group Piles by Numerical Analysis", J. Korean Geotech. Soc., 26(11), 29-38.
  6. Civjan, S.A., Bonczar, C., Brena, S.F., DeJong, J. and Crovo, D. (2007), "Integral abutment bridge behavior: Parametric analysis of a Massachusetts bridge", J. Bridge Eng., 12(1), 64-71. https://doi.org/10.1061/(ASCE)1084-0702(2007)12:1(64)
  7. Comodromos, E.M. and Pitilakis, K.D. (2005), "Response evaluation for horizontally loaded fixed-head pile groups using 3-D non-linear analysis", Int. J. Numer. Anal. Method. Ingeomech., 29(6), 597-625. https://doi.org/10.1002/nag.428
  8. Dasansoft (2014), EST Plus user manual; Dasansoft Co. Ltd., Korea.
  9. Dicleli, M. and Albhaisi, S.M. (2003), "Maximum length of integral bridges supported on steel H-piles driven in sand", Eng. Struct., 25(12), 1491-1504. https://doi.org/10.1016/S0141-0296(03)00116-0
  10. Dicleli, M. and Albhaisi, S.M. (2004), "Effect of cyclic thermal loading on the performance of steel H-piles in integral bridges with stub-abutments", J. Constr. Steel Res., 60(2), 161-182. https://doi.org/10.1016/j.jcsr.2003.09.003
  11. Dicleli, M. and Erhan, S. (2015), "Low cycle fatigue effects in integral bridge steel H-piles under earthquake induced strain reversals", Adv. Struct. Eng., Springer, 2505-2512.
  12. Elias, V., Barry, P. and Christopher, R. (2001), "Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction Guidelines", US Department of Transportation; Federal Highway Administration, Washington, D.C., USA, pp. 1-394.
  13. Faraji, S., Ting, J.M., Crovo, D.S. and Ernst, H. (2001), "Nonlinear analysis of integral bridges: finiteelement model", J. Geotech. Geoenviron. Eng., 127(5), 454-461. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(454)
  14. Fellenius, B.H. (2004), "Unified design of piled foundations with emphasis on settlement analysis: Current Practices and future trends in deep foundations", Proceedings of Geo-Trans Conference, Los Angeles, USA, pp. 253-275.
  15. Fennema, J.L., Laman, J.A. and Linzell, D.G. (2005), "Predicted and measured response of an integral abutment bridge", J. Bridge Eng., 10(6), 666-677. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:6(666)
  16. Hatami, K. and Bathurst, R.J. (2006), "Numerical model for reinforced soil segmental walls under surcharge loading", J. Geotech. Geoenviron. Eng., 132(6), 673-684. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:6(673)
  17. Helwany, S., Koutnik, T.E. and Ghorbanpoor, A. (2007), "Evaluation of bridge approach settlement mitigation methods", University of Wisconsin-Milwaukee, pp. 1-113.
  18. Hossain, M., Kibria, G., Khan, M., Hossain, J. and Taufiq, T. (2011), "Effects of backfill soil on excessive movement of MSE wall", J. Perform. Constr. Facil., 26(6), 793-802.
  19. Huang, B., Bathurst, R.J. and Hatami, K. (2009), "Numerical study of reinforced soil segmental walls using three different constitutive soil models", J. Geotech. Geoenviron. Eng., 135(10), 1486-1498. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000092
  20. Huang, J., Parsons, R.L., Han, J. and Pierson, M.C. (2011), "Numerical analysis of a laterally loaded shaft constructed within an MSE wall", Geotext. Geomembr., 29(3), 233-241. https://doi.org/10.1016/j.geotexmem.2010.11.003
  21. Huang, J., Han, J., Parsons, R.L. and Pierson, M.C. (2013), "Refined numerical modeling of a laterallyloaded drilled shaft in an MSE wall", Geotext. Geomembr., 37, 61-73. https://doi.org/10.1016/j.geotexmem.2013.02.004
  22. ISO (1997), Mechanical vibration and shock-Evaluation of human exposure to whole-body vibration-Part 1: General requirements, ISO 2631-1; International Organization for Standardization.
  23. KEC (2010), Practical Application of Semi-integral abutment bridge; Expressway & Transportation Research Institute, Korea.
  24. KEC (2012), Evaluation and Improvement of Ride Discomfort at Bridge Approaches in Service; Expressway & Transportation Research Institute, Korea.
  25. Kibria, G., Hossain, M.S. and Khan, M.S. (2013), "Influence of soil reinforcement on horizontal displacement of MSE wall", Int. J. Geomech., 14(1), 130-141.
  26. Kim, S.-R., Lee, J.-H., Park, J.-H. and Chung, M.-K. (2009a), "Analysis of reinforcement effect of steelconcrete composite piles by numerical analysis (I) - Material strength", J. Korean Soc. Civil Engr., 29(6C), 259-266.
  27. Kim, S.-R., Lee, S.-H., Chung, M.-K. and Lee, J.-H. (2009b), "Analysis of reinforcement effect of steelconcrete composite piles by numerical analysis (II) - Bearing capacity", J. Korean Soc. Civil Engr., 29(6C), 267-275.
  28. Kunin, J. and Alampalli, S. (2000), "Integral abutment bridges: current practice in United States and Canada", J. Perform. Constr. Facil., 14(3), 104-111. https://doi.org/10.1061/(ASCE)0887-3828(2000)14:3(104)
  29. MIDAS, I.T. (2013), GTS NX on-line manual; MIDAS Information Technology Co., Ltd., Korea.
  30. MSC (2014), CarSim Quick Start Guide; Mechanical Simulation Corporation, USA.
  31. Park, Y.H. and Nam, M.S. (2007), "Behavior of earth pressure and movements on integral abutments", J. Korean Soc. Civil Engr., 27(3C), 163-173.
  32. Pierson, M.C., Parsons, R.L., Han, J. and Brennan, J.J. (2011), "Laterally loaded shaft group capacities and deflections behind an MSE wall", J. Geotech. Geoenviron. Eng., 137(10), 882-889. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000496
  33. Potts, D.M. (2003), "Numerical analysis:A virtual dream or practical reality?" Geotechnique, 53(6), 535-573. https://doi.org/10.1680/geot.2003.53.6.535
  34. Rahim, A. (1998), "The significance of non-associated plasticity", Crisp News, Issue 6.
  35. Rowe, R.K. and Ho, S. (1997), "Continuous panel reinforced soil walls on rigid foundations", J. Geotech. Geoenviron. Eng., 123(10), 912-920. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:10(912)
  36. VTrans, I.A.C. (2008), Integral Abutment Bridge Design Guidelines; (2nd Ed), VTrans Structures Section, The State of Vermont, Agency of Transportation, Montpelier, VT, USA.
  37. Zevgolis, I. and Bourdeau, P. (2007), "Mechanically stabilized earth wall abutments for bridge support", Joint Transportation Research Program; Indiana Department of Transportation and Purdue University, Indiana, pp. 1-146.