DOI QR코드

DOI QR Code

Shear bond strength in bilayer metal-heat pressed glass ceramic structure

열가압 방식의 금속-유리도재 이중 구조물의 전단결합강도에 대한 연구

  • Lee, Kyungeun (Department of Health Science, Specialized in Dental Lab. Science & Engineering, Graduate School, Korea University) ;
  • Park, Jin-Young (Institute for Health Science, College of Public Health Science, Korea University) ;
  • Kim, Ji-Hwan (Department of Health Science, Specialized in Dental Lab. Science & Engineering, Graduate School, Korea University) ;
  • Kim, Woong-Chul (Department of Health Science, Specialized in Dental Lab. Science & Engineering, Graduate School, Korea University)
  • 이경은 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 박진영 (고려대학교 보건과학연구소) ;
  • 김지환 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김웅철 (고려대학교 일반대학원 보건과학과 치의기공전공)
  • Received : 2016.10.31
  • Accepted : 2017.06.19
  • Published : 2017.06.30

Abstract

Purpose: The purpose of this study was to compare the shear bond strength of the metal-heat pressed glass ceramic bilayer structure. Methods: Metal framework specimens were prepared and surface is spreaded opaque(IPS InLine system opaque, IvoclarVivadent, Liechtenstein). There were 10 specimens for each bilayer dental ceramic group. The first group was porcelain fused metal, Press on metal IPS Inline press group, and press on metal HASS prototype group. Specimens measured for the shear bond strength on Schwickerath test by Instron universal testing machine(Instron3345, Instron Corp., USA). Mean average bond strength values of each specimen group were analyzed using a one-way ANOVA analysis of variance Saphiro-wilk's test. Statistical analysis were performed using IBM SPSS 23.0(IBM Co., Armonk, USA) Results: $RMS{\pm}SD$ The highest mean average HASS POM showed a bond strength value ($47.55{\pm}12.80Mpa$). The lowest mean average values Porcelain fused metal ($33.30{\pm}2.00Mpa$). Independent t-test was conduct to analysis the significant difference (p<0.05) (Table 3). Conclusion: Three kinds of Metal/ glass bilayer dental ceramics bond strength were clinical acceptability. Especially, as lithium disilicate containing represents higher bond strength.

Keywords

References

  1. Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent, 89(4), 374-380, 2003. https://doi.org/10.1067/mpr.2003.42
  2. Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of coreveneer interface in bi-layered ceramics. J Prosthet Dent, 91(4), 349-355, 2004. https://doi.org/10.1016/j.prosdent.2004.02.009
  3. Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. Elsevier Health Sciences, 2013.
  4. Chu S. Current clinical strategies with lithiumdisilicate restorations. Compend Contin Educ Dent, 33(1) 64, 6-7, 2012.
  5. Craig RG. Mechanical properties in restorative dental materials. 11th ed, 551-92, 2002.
  6. Fonseca JC, Henriques GEP, Sobrinho LC, de Goes MF. Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium - aluminum - vanadium copings. Dent Mater, 19(7), 686-691, 2003. https://doi.org/10.1016/S0109-5641(03)00014-9
  7. Gorman C, McDevitt W, Hill R. Comparison of two heat-pressed all-ceramic dental materials. Dent Mater, 16(6), 389-395, 2000. https://doi.org/10.1016/S0109-5641(00)00031-2
  8. Holand W, Schweiger M, Frank M, Rheinberger V. A comparison of the microstructure and properties of the IPS $Empress^{(R)}$ 2 and the IPS $Empress^{(R)}$ glass-ceramics. J Biomed Mater Res, 53(4), 297-303, 2000. https://doi.org/10.1002/1097-4636(2000)53:4<297::AID-JBM3>3.0.CO;2-G
  9. International standard Organisation. ISO9693-1: Metal-ceramic dental restorative systems. 2012.
  10. Ishibe M, Raigrodski AJ, Flinn BD, Chung KH, Spiekerman C, Winter RR. Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia cores. J Prosthet Dent, 106(1), 29-37, 2011. https://doi.org/10.1016/S0022-3913(11)60090-5
  11. Jeoung SH, Bae JM, Oh SH. Effect of Chemical Treatment on the Bond Strength Between Zirconia and Veneer Ceramics. J Korean Res Soe Dent Mater, 12;39(4):269-276, 2012.
  12. Lee BJ. Shear bond strengths of ceramic to a soft milling cobalt-chromium alloy and a base metal casting alloy. Department of dentistry Graduate School, Kyungpook National University, 2014.
  13. McLaren EA, Whiteman YY. Ceramics: rationale for material selection. Compend Contin Educ Dent, 31(9), 666-668, 2010.
  14. Niedermeier W, Dentb M. Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs. J Prosthodont, 15(3), 299-302, 2002.
  15. Petteno D, Schierano G, Bassi F, Bresciano ME, Carossa S. Comparison of marginal fit of 3 different metal-ceramic systems: an in vitro study. Int J Prosthodont, 13(5), 405-408, 2000.
  16. Schaerer P, Sato T, Wohlwend A. A comparison of the marginal fit of three cast ceramic crown systems. J Prosthet Dent, 59(5), 534-542, 1988. https://doi.org/10.1016/0022-3913(88)90065-0
  17. Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 31(7), 682-688, 2004. https://doi.org/10.1111/j.1365-2842.2004.01284.x
  18. White S, Miklus V, McLaren E, Lang L, Caputo A. Flexural strength of a layered zirconia and porcelain dental all-ceramic system. J Prosthet Dent, 94(2), 125-131, 2005. https://doi.org/10.1016/j.prosdent.2005.05.007
  19. Zanotto ED. Bright future for glass-ceramics. Am Ceram Soc Bull, 89(8), 19-27, 2010.