DOI QR코드

DOI QR Code

Characteristics of Elastic Paving Material Made of Sawdust and Urethane Resin Mixture

톱밥과 우레탄 수지 혼합물로 제조한 탄성 포장재의 특성

  • Choi, Jae-Jin (Department of Civil & Environmental Engineering, Kongju National University) ;
  • Lee, Kwan-Ho (Department of Civil & Environmental Engineering, Kongju National University) ;
  • Moon, Seung-Kwon (SGS Korea Construction Materials Testing Center)
  • 최재진 (공주대학교 건설환경공학부) ;
  • 이관호 (공주대학교 건설환경공학부) ;
  • 문승권 (한국에스지에스(주) 건설시험연구원)
  • Received : 2017.03.02
  • Accepted : 2017.06.09
  • Published : 2017.06.30

Abstract

Research and commercialization of wood chips-urethane resin mixtures as paving materials for park trails and tourist attractions are underway. The aim of this study was to expand the use of such paving materials to the playgrounds, where vigorous physical movements occur frequently. For this purpose, the physical properties and safety of the paving material, in which some or all of the wood chips(passing through a 10mm sieve and remaining in a 3mm sieve) were replaced with sawdust, were studied experimentally. Strength, elastic modulus, slip resistance, shock absorption and heavy metal content tests were carried out by varying the mixing ratio of urethane resin, sawdust and wood chip. As a result, in the case of wood chip-resin mixtures with mass ratios of the resin to total mass of sawdust and wood chips of 1.0 and 1.2 and having a ratio of sawdust mass to total mass of sawdust and wood chips of 0-0.4, it was found that the properties satisfied KS F 3888-2. On the other hand, in case of using sawdust only as a woody material, the shock absorbability was below standard, and the mass ratio of resin to sawdust required 1.2 or more to ensure the specified tensile strength.

공원 산책로 및 관광지의 포장재로서 목재 칩-우레탄 수지 혼합물의 연구 및 상업화가 진행 중에 있다. 본 연구에서는 활발한 몸동작이 일어나는 놀이터에서 이러한 포장재의 이용을 확대하기 위한 방안을 강구하고자 하였다. 이를 위해, 목재 칩 (10mm 체를 통과하고 3mm 체에 남는 것)의 일부 또는 전부를 톱밥으로 대체한 목질 포장재의 물리적 성질 및 안전성을 실험에 의해 검토하였다. 우레탄 수지, 톱밥 및 목재 칩의 혼합비를 변화시켜 인장 강도, 휨강도, 탄성계수, 미끄럼 저항성, 충격 흡수성, 중금속 함량 및 용출 시험을 실시하였다. 그 결과, 톱밥과 목재 칩의 총 질량에 대한 수지의 질량비가 1.0 및 1.2이고, 톱밥과 목재 칩의 총 질량에 대한 톱밥의 질량비가 0~0.4인 시험체의 경우, KS F 3888-2의 표준을 대체로 만족함으로써 놀이터 등에서의 이용 가능성을 확인하였다. 그러나 목질 재료로 톱밥만을 사용한 경우에는 충격 흡수성이 기준치를 밑돌고, 규정된 인장 강도를 확보하기 위해서 톱밥과 수지의 질량비는 1.2 이상을 필요로 하는 것으로 나타났다.

Keywords

References

  1. H. B. Ko., M. Y. Ko., "An Experimental Study on Basic Properties of Elastic Paving Materials", Journal of Korean Academia- Industrial Cooperation Society, vol. 16, no. 7, pp. 5021-5028, 2015. DOI: http://doi.org/10.5762/KAIS.2015.16.7.5021
  2. C. W. Hong, "Examination of Color Difference in Elastic Pavement that Uses EPDM Chip Using Ultraviolet Ray Accelerated Weathering Test", Journal of Korean Society of Civil Engineers, vol. 31, no. 1D, pp. 91-98, 2011.
  3. Ministry of Environment, Measures for Hazard Assessment and Management of Artificial Turf and Elastic Paving Materials. p.200, 2010.
  4. KS F 3888-2 : Outdoor facilities-Elastic Paving Materials, 2016.
  5. H. Tokushige, M. Kawakami, Y. Kurimoto, H. Yamauchi, T. Sasaki, "Porous Polymer Concrete Using Polyurethane Resin and Chipped Aggregate made of Wood Wastes", RILEM International Symposium on Environment-Conscious Materials and Systems for Sustainable Development, pp. 321-328, Koriyama, Japan, 2004.
  6. J. J. Choi, K. H. Lee, "Performance of Sidewalk Pavement Containing Waste Wood Chips", Journal of Testing and Evaluation", vol. 42, no. 1, pp. 151-161, 2014. DOI: https://doi.org/10.1520/JTE20120253
  7. KS F 2375 : Testing Method for Measuring Surface Frictional Properties Using the British Pendulum Tester, 2016.
  8. D. G., Park, S. Y. Jung, J. K. Kim, H. G. Jung, "Establishment of Slip Resistance Standard, Magazine of Korean Society of Road Engineers", vol. 13, no. 1, pp. 33-40, 2011.
  9. M. Nabeshima, M. Yamada, "Range of Proper Hardness for Aged about Walkway Pavement", Journal of Japan Society of Civil Engineers, no. 788/V-67, pp. 117-126, 2005. DOI: https://doi.org/10.2208/jscej.2005.788_117
  10. Y. Takeuchi, K. Sato, M. Aoki, Y. Kuni, K. Sato, H. Yaginuma, "Development of Pavement Design Method for Walkers in Consideration of Comfort and Safety", Journal of Japan Society of Civil Engineers-E1, vol. 67, no. 3, pp. I_1-I_8, 2011.
  11. EN 14808 : Surfaces for Sports Areas- Determination of Shock Absorption, 2005.
  12. EN 14809 : Surfaces for Sports Areas- Determination of Vertical Deformation, 2005.
  13. J. V. Dura, A. C. Garcia, J. Solaz, "Testing Shock Absorbing Materials : The Application of Viscoelastic Linear Model", Sports Engineering, vol. 5, pp. 9-14, 2002. DOI: https://doi.org/10.1046/j.1460-2687.2002.00085.x