DOI QR코드

DOI QR Code

Analysis of Influence on Derailment due to Primary Spring Aging

축상스프링 노화에 따른 탈선안전도 영향 분석

  • Received : 2017.05.22
  • Accepted : 2017.06.20
  • Published : 2017.06.30

Abstract

In order to analyze the influence on derailment safety according to the aging of primary rubber springs widely applied to railway vehicles, characteristic tests were carried out on aged primary rubber spring samples. To analyze the effect of primary rubber spring aging on derailment safety, a vehicle dynamic analysis was carried out. The results of the vertical characteristics test for the rubber spring specimens with 17 years of service life revealed that the displacement restoration function was degraded due to rubber aging and the spring stiffness significantly increased. The results of the running dynamic analysis simulating the twist track running in accordance with the EN14363 standard, compared with the normal vehicle model (Case 1), showed that the derailment coefficient and the wheel unloading of the vehicle model (Case 2) using the aging primary spring characteristic increased, and the derailment safety was degraded. IN particular, it was found that the derailment safety due to the reduction of the wheel load is weak in the transient section where a steep slope change occurs.

철도차량에 폭 넓게 적용되고 있는 축상고무스프링의 노화에 따른 탈선안전도 영향을 분석하고자 노화 축상고무스프링 시료를 대상으로 특성시험을 수행하였다. 그리고 축상고무스프링 노화가 탈선 안전에 미치는 영향을 분석하기 위하여 주행 동특성 해석을 수행하였다. 사용연수 17년이 지난 롤고무 축상스프링 시료를 대상으로 한 상하방향 특성시험결과, 고무 노화로 인하여 변위 복원기능이 저하되었고 스프링강성이 현저히 증가하였다. 그리고 EN14363규격 적용 twist궤도 주행 시를 모사한 주행동특성 해석결과, 정상 차량모델(Case1)에 비하여 노화 축상스프링 특성을 적용한 차량모델(Case2)의 탈선계수와 윤중감소가 증가하여 탈선안전도는 저하하였다. 특히 급격한 선형 변동이 발생하는 천이구간 주행 시 윤중감소로 인한 탈선안전도는 취약하게 나타났다.

Keywords

References

  1. K.J. Woo, S.Y. Jeong, Y.W. Kim (2015) A study on the wheel climbing derailment of the degraded trains, Proceedings Conference of the Korean Society for Railway, Yeosu, Korea, pp. 559-566.
  2. H.M. Hur, W.H. You, T.W. Park (2007) Analysis on the properties of conical rubber spring for railway rolling-stock, Proceedings Conference of the Korean Society for Railway, Busan, Korea, pp. 68-73.
  3. H.M. Hur, J.H. Park, W.H. You, T.W. Park (2008) A study on the properties of the aged conical rubber spring for the railway rollingstock, 4th Asian Conference on Multibody Dynamics, Jeju, Korea, pp. 670-677.
  4. M. Suzuki, A. Hamada, T. Shimomura (2004) Analysis of properties of three-layed conic rubber spring for axle-box supporting system, Railway Technical Research Institute Report, 18(10), pp. 9-14.
  5. British Standards Institution (2005) Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests, EN14363.
  6. S. Iwnicki (2006) Handbook of Railway Vehicle Dynamics, CRC Press, NW, pp. 209-235.
  7. Ministry of Land, Infrastructure and Transport (2014) Technical Specifications for Urban Railway Vehicles, KRTS-VE-Part51-2014(R1).