한국섬유공학회지 (Textile Science and Engineering)

  • 제54권3호
  • /
  • Pages.191-198
  • /
  • 2017
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

Poly(ethylene terephthalate)와 Poly(trimethylene terephthalate) 블렌드의 구조 분석과 물리적 특성: 블렌딩 시간과 블렌드 비율의 영향

Structural Characterization and Physical Properties of Poly(ethylene terephthalate) and Poly(trimethylene terephthalate) Blends: Effects of Blending Time and Blend Ratio

  • Chae, Dong Wook (Department of Textile Engineering, Kyungpook National University) ;
  • Choi, Kyung Rak (Department of Organic and Nano Engineering, Hanyang University) ;
  • Kim, Byoung Chul (Department of Organic and Nano Engineering, Hanyang University)
  • 투고 : 2017.05.22
  • 심사 : 2017.06.19
  • 발행 : 2017.06.30
⟨ 이전 논문 다음 논문 ⟩

초록

Poly(ethylene terephthalate) (PET) and poly(trimethylene terephthalate) (PTT) were melt blended at $280^{\circ}C$ at varying blending time and ratio. The resulting physical properties were examined in relation to ester exchange reactions. The PET/PTT 50/50 blends (by weight percentage) exhibited double melting peaks ($T_m$) up to 30 min blending time beyond which they were merged to one broader peak. The melting peak had a nearly linear relationship with blending time and displayed a much steeper decrease for ET units than for TT units. Two new peaks for asymmetric aromatic carbons were detected in $^{13}C$-NMR spectra and their intensity increased notably from 40 min blending time which was consistent with thermal analysis. The dissolution of copolyesters occurred even after 10 min blending time and its degree increased with blending time. FESEM images of chloroform etched fracture surfaces displayed coarse and continuous phase properties from 40 min blending time while losing the spherical shape of each component. In the DSC measurement of the PET/PTT blends prepared at various ratios at a given blending time of 20 min, all the blends exhibited a single glass transition temperature ($T_g$) more consistent with the Gordon-Taylor equation than the Fox equation. In addition, a single $T_m$ peak was observed in each sample, except for 50/50 composition, which shows the coexistence of $T_m$ for each component. All blends except for 50/50 exhibited a similar WAXD patterns to their rich component. This was evidenced by solubility test results showing the highest solubility for 50/50 blends. This phenomenon was also confirmed in FESEM measurement of chloroform etched fracture surfaces where the blends composed of an equal amount of the component exhibited coarse and dumbbell-like domains.

키워드

참고문헌

  1. P. J. Flory, "Kinetics of the Degradation of Polyesters by Alcohols", J. Am. Chem. Soc., 1940, 62, 2255−2261. https://doi.org/10.1021/ja01866a001
  2. T. Suzuki, H. Tanaka, and T. Nishi, "Miscibility and Transesterification in Bisphenol a Polycarbonate/Poly(ethylene terephthalate) Blends", Polymer, 1989, 30, 1287−1297. https://doi.org/10.1016/0032-3861(89)90050-5
  3. B. Jacques, J. Devaux, R. Legras, and E. Nield, "NMR Study of Ester-Interchange Reactions During Melt Mixing of Poly(ethylene terephthalate)/Poly(butylene terephthalate) Blends", J. Polym. Sci. Part A: Polym. Chem., 1996, 34, 1189−1194.
  4. K. Y. Lim, B. C. Kim, and K. J. Yoon, "The Effect of Molecular Weight of Polycaprolactone on the Ester Interchange Reactions During Melt Blending with Poly(ethylene terephthalate)", Polym. J., 2002, 34, 313−319. https://doi.org/10.1295/polymj.34.313
  5. N. Avramova, "Amorphous Poly(ethylene terephthalate)/ Poly(butylene terephthalate) Blends: Miscibility and Properties", Polymer, 1995, 36, 801−808. https://doi.org/10.1016/0032-3861(95)93111-X
  6. G. Montaudo, C. Puglisi, and F. Samperi, "Mechanism of Exchange in PBT/PC and PET/PC Blends: Composition of the Copolymer Formed in the Melt Mixing Process", Macromolecules, 1998, 31, 650−661. https://doi.org/10.1021/ma9712054
  7. L. C. Mendes and P. S. da C. Pereira, "Optical Microscopy as a Tool to Correlate Morphology and Thermal Properties of Extruded PET/PC Reactive Blends", Mater. Sci. Appl., 2011, 2, 1033−1040.
  8. C. K. Samios and N. K. Kalfoglou, "Compatibilization of Poly(ethylene terephthalate)/Polyamide-6 Alloys: Mechanical, Thermal and Morphological Characterization", Polymer, 1999, 40, 4811−4819. https://doi.org/10.1016/S0032-3861(98)00709-5
  9. S. J. Hanley, A. M. Nesheiwat, R. T. Chen, M. Jamieson, R. A. Perason, and L. H. Sperling, "Phase Separation in Semi- Crystalline Blends of Poly(phenylene sulfide) and Poly (ethyleneterephthalate) II: Effect of Poly(phenylene sulfide) Homopolymers Solubilization of PPS-graft-PET Copolymer on Morphology and Crystallization Behavior", J. Polym. Sci., Part B: Polym. Phys., 2000, 38, 599−610.
  10. T. W. Son, K. I. Kim, N. H. Kim, M. G. Jeong, and Y. H. Kim, "Thermal Properties of Poly(trimethylene terephthalate)/ Poly(ethylene terephthalate) Melt Blends", Fiber. Polym., 2003, 4, 20−26. https://doi.org/10.1007/BF02899325
  11. M. D. Teli, R. D. Kale, and L. Bhatt, "Low Temperature Dyeing of PET/PTT Blend Fibers", Adv. Appl. Sci. Res., 2016, 7, 13−19.
  12. J. M. Huang and F. C. Chang, "Crystallization Kinetics of Poly(trimethylene terephthalate)", J. Polym. Sci., Part B: Polym. Phys., 2000, 38, 934−941.
  13. R. Arasteh, A. Naderi, N. Kaptan, L. Maleknia, S. Akhlaghi, and H. Nazockdast, "Effects of Fiber Spinning on the Morphology, Rheology, Thermal, and Mechanical Properties of Poly(trimethylene terephthalate)/Poly(ethylene terephthalate) Blends", Adv. Polym. Tech., 2014, 33, 21443.
  14. G. S. Kim, J. M. Son, J. K. Lee, and K. H. Lee, "Morphology Development and Crystallization Behavior of Poly(ethylene terephthalate)/Poly(trimethylene terephthalate) Blends", Eur. Polym. J., 2010, 46, 1696−1704. https://doi.org/10.1016/j.eurpolymj.2010.06.003
  15. S. Safapour, M. Seyed-Esfahani, F. Auriemma, O. R. de Ballesteros, P. Vollaro, R. D. Girolamo, C. D. Rosa, and A. Khosroshahi, "Reactive Blending as a Tool for Obtaining Poly(ethylene terephthalate)-Based Engineering Materials with Tailored Properties", Polymer, 2010, 51, 4340−4350. https://doi.org/10.1016/j.polymer.2010.07.011
  16. H. Liang, F. Xie, B. Chen, F. Guo, Z. Jin, and F. Luo, "Miscibility and Melting Behavior of Poly(ethylene terephthalate)/Poly (trimethylene terephthalate) Blends", J. Appl. Polym. Sci., 2008, 107, 431−437.
  17. H. Liang, F. Xie, F. Guo, B. Chen, F. Luo, and Z. Jin, "Non- Isothermal Crystallization Behavior of Poly(ethylene terephthalate)/Poly(trimethylene terephthalate) Blends", Polym. Bull., 2008, 60, 115−127.
  18. E. Ponnusamy, C. T. Vijayakumar, T. Balakrishnan, and H. Kothandaraman, "Preparation and Characterization of Poly (ethylene/tetramethylene terephthalate) Copolyesters", Polymer, 1982, 23, 1391−1394.
  19. K. Y. Lim, B. C. Kim, and K. J. Yoon, "Structural and Physical Properties of Biodegradable Copolyesters from Poly(ethylene terephthalate) and Polycaprolactone Blends", J. Appl. Polym. Sci., 2003, 88, 131−138. https://doi.org/10.1002/app.11597
  20. S. P. Dandurand, S. Perez, J.-F. Revol, and F. Brisse, "The Crystal Structure of Poly(trimethylene terephthalate) by X-ray and Electron Diffraction", Polymer, 1979, 20, 419−426. https://doi.org/10.1016/0032-3861(79)90064-8
  21. I. J. Desborough, I. H. Hall, and J. Z. Neisser, "The Structure of Poly(trimethylene terephthalate)", Polymer, 1979, 20, 545−552. https://doi.org/10.1016/0032-3861(79)90163-0
  22. W. Bojie, C. Y. Li, J. Hanzlicek, S. Z. D. Cheng, P. H. Geil, J. Grebowicz, and R.-M. Ho, "Poly(trimethylene teraphthalate) Crystal Structure and Morphology in Different Length Scales", Polymer, 2001, 42, 7171−7180. https://doi.org/10.1016/S0032-3861(01)00046-5